Defence Government Departments Closing in 2 days TDR #58547866

Tender For Repair And Renovation Of Quarter No. 201 G.Os White House At Apc Zewan Srinagar.

Issued by Government Departments · Jammu, Jammu and Kashmir
Tender Value
4 Lakhs
Estimated cost
Bid Submission
23 Nov 2026
2 days left
EMD
8000
Bank guarantee accepted
Document Fee
300
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Jammu → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available

Project Description

Tender for Repair And Renovation Of Quarter No. 201 G.Os White House At Apc Zewan Srinagar.

BOQ

Name of Work:- Repair and renovation of Quarter No. 201 G.Os White House at APC Zewan Srinagar.
Sl. No. Item Description
1Providing and fixing of 2’-0” deep kitchen cabnets/ Almirah of approved design & make including shutters, partitioning with 19mm thick (water proof) ply board of approved make and quality including back covering of 6mm thick water proof ply and fixing 1mm thick mica of approved colour and make over the frame and shutter, as around including cost of all fixtures i.e. glazing, locking arrangements, handle etc. as per the directions of site Engineer. (complete Job)
2Providing and fixing of 1'-4\\"” deep kitchen cabnets/ Almirah of approved design & make including shutters, partitioning with 19mm thick (water proof) ply board of approved make and quality including back covering of 6mm thick water proof ply and fixing 1mm thick mica of approved colour and make over the frame and shutter, as around including cost of all fixtures i.e. glazing, locking arrangements, handle etc. as per the directions of site Engineer. (complete Job)
3Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.
4Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface toprepare the surface even and smooth complete 1 mm thick
5Distempering with dry distemper of approved brand and manufacture (two or more coats) and of required shade on new work, over and including water thinnable priming coat to give an even shade
6Demolishing cement concrete manually/by mechanical means including disposal of material within 50 meters lead as per direction of Engineer-incharge 1:3:6 or richer mix (i/c equivalent design mix)
7Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size)
8Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 meters lead for thickness of tiles 10 mm to 25 mm
915mm Cement plaster on the rough side of single or half brick wall of mix: 1 : 6 ( 1 cement : 6 fine sand)
10Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointingin white cement mixed with pigment of matching shade complete.
11Providing and laying Ceramic glazed floor tiles 300x300 mm (thickness to be specified by the manufacturers) of 1st quality conforming to IS: 15622 of approved make, laid on 20 mm thick bed of cement mortar 1: 4 ( 1 cement : 4 coarse sand) including pointing the joints with white cement and matching pigment etc., complete In colour such as White, Ivory, Grey, Fume Red Brown
12Providing and fixig of C P fittings of approved make 15mm nominal bore as directed by EIC
13Basin Mixer
14Long Bib Cock
15Angle valve
16Bib Cock short body
17Wall Mixer
18Sink Mixer
19Health Faucet
20Providing and fixing of C P fittings of approved make as directed by EIC
21100mm size grating
22Towel rod
23Soap case
24Providing and fixing of PVC connection to C P fittings 1'-6\\" long
25Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.
26Providing and fixing wash basin with C.I. brackets, 15mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required White Vitreous China Wash basin size 550x400 mm with a pair of 15 mm C.P. brass pillar taps.
27Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings.
28Providing and fixing of white vitrouse china pedestal type water closet (European type W. C. pan One piece) with seat and lid, flushing cistern with white solid plastic seat and lid.
29Providing and fixing on wall face un-plasticized Rigid PVC rain water pipes conforming to IS: 13592 Type A including jointing with seal ring conforming to IS: 5382 leaving 10 mm gap for thermal expansion. (i) Single socketed pipes 110 mm diametre
30Providing and fixing on wall face un-plasticized Rigid PVC rain water pipes conforming to IS: 13592 Type A including jointing with seal ring conforming to IS: 5382 leaving 10 mm gap for thermal expansion. (i) Single socketed pipes 75 mm diametre
31Providing and fixing of fitting to PVC soil waste pipes of approved manufacture and brand (Type-B)
32100mm dia plain bend
33100mm floor trap
3475mm dia plain bend
35Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply includingall PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer-incharge. Internal work Concealed fixing the pipe with clamps at 1.00 meter spacing including cutting chases and making good thewall etc. PN-16 pipe , 25mm OD(SDR-7.4)
36Providing and fixing of imported wall paper on walls or required desing as approved by Engineer incharge complete Job.
37Providing and fixing of PVC Sapphire paneling of approved make , design including cornice with necessary frame work as required complete as directed by EIC.
38Carriage of material by mechanical transport including all loading / unloading complete
39Sand Aveg. lead of 25 Km
40Stone aggregate Aveg. lead of 20 Km Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58547866
AUTHORITY Government Departments
TENDER VALUE 4 Lakhs
LAST DATE 23-11-2026
Authority
Authority Name Head Quarters
Work Description Tender for Repair And Renovation Of Quarter No. 201 G.Os White House At Apc Zewan Srinagar.
Basic Detail
Tender No e-NIT/EE-PCD/PHQ/119/2026-27
Bidding Type Tender
Location
City Jammu
State Jammu and Kashmir
Key Dates
Publish Date 16 Nov 2026
Submission Date 23 Nov 2026
Open Date 24 Nov 2026
Finance
Tender Value 4 Lakhs
Tender Fee 300
EMD 8000
Exemption Not Available
Document List
0566bef3-891b-43dd-bea7-5cc09cccd06a.html
BOQ_1124303.xls
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 16, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Nov 23, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 2 days
Nov 24, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 3 days

Tender Documents

Download All (ZIP) ↓
html

0566bef3-891b-43dd-bea7-5cc09cccd06a.html

xls

BOQ_1124303.xls

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender