Defence Statutory Bodies & Commissions/Committees Closing in 18 days TDR #58547604

Tender For Provn Of Parking Shed In Technical Area & Addn/Altn Of Rooms For Integrated Weapon Training Simulator (Iwts) To Bld No.P-81 At Af Stn Lonavla. (8508/E8)

Issued by Statutory Bodies & Commissions/Committees · Pune, Maharashtra
Tender Value
9.74 Lakhs
Estimated cost
Bid Submission
09 Dec 2026
18 days left
EMD
19500
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Pune → Maharashtra
EMD Exemption
Available
Quantity
Not Available

Project Description

Tender for Provn Of Parking Shed In Technical Area & Addn/Altn Of Rooms For Integrated Weapon Training Simulator (Iwts) To Bld No.P-81 At Af Stn Lonavla. (8508/E8)

BOQ

Name of Work:- PROVN OF PARKING SHED IN TECHNICAL AREA & ADDN/ALTN OF ROOMS FOR INTEGRATED WEAPON TRAINING SIMULATOR (IWTS) TO BLD NO.P-81 AT AF STN LONAVLA. (8508/E8)
Sl. No. Item Description
1Excavating post holes or similar holes, each not exceeding 0.50 Cu. M, getting out in Hard/ Dense soil, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, watering, and removing surplus soil to a distance n.exc 100m & making good surface complete all as specified and directed.
2M&L Plain Cement Concrete Type C2 1:3:6(using 20 mm graded granite stone aggregate) in foundations, filling and mass concrete etc complete all as specified and directed.
3S&F tublar trusses (framed) , posts,purlins, rafter ,distance pieces, etc. including special shaped washers etc omplete using ERW or induction butt welded tubes conforming to IS 1161-11979 Gde St -240 complete all as specified.
4S&F joist channel,angle,or tee sections fixed indipendently,with out connecting plates ,etc. cut ordinary length ie., with in 20 mm of length indicated conforming to Fe410-Wgde-E-250 Quality A complete all as specified.
5S&F Plates (plain or chequered ) channels , square cut or notched (ordinary and counter sunk) forming holes, without any attachement Fe410-Wgde-E-250 Quality A complete all as specified.
6S&F 16 to 20mm dia of neck Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exc 5cm but not exc 10cm long complete all as specified
7S&F wind ties for roof including securing bolts including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe 290 Gde E-165 etc complete all as specified and directed.
8S&F framed work such as grills, gratings, etc, with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks and similar work conforming to Fe 290 Gde E-165 complete all as specified.
9S&F for Pre- Painted galvatume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour any profile as per required, having tensile strength of 550Mpa Coating Mass (GSM): AZ-200 (200 g/m²) Compliance Standards: ASTM A792, AS1397, IS 15961, or JIS G3321 as in roof covering/ cladding to wall, fixed with self tapping screws, complete all as specified and directed.
10M&L for Preparation of new steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coats of Anticorrosive paint (Epoxy)over a coat of primer complete all as specified and directed.
11Surface excavation n exc 30 Cm deep and averaging 15 Cm deep and getting out in hard dense soil complete all as specified.
12M&L for hardcore of broken stone or boulders of gauge not exc. 63 mm, deposited, spread and levelled in layers not exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed.
13M&L for 75 mm thick plain cement concrete 1:4:8 mix,type D2 (using 40 mm graded stone aggregates) as in subbase to floor complete all as specified and as directed.
14M&Lfor 80mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, with glossy finish design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand; complete all as specified and as directed by engineer-in- charge.
15Material and labour for brick work with Sub class 'B' bricks, straight or curved on plan exc 6m mean radius built in Cm (1:6) all as specified.
16Taking down cement or cement lime plaster, any description on brick or stone walls, etc, including raking out joints, hacking for key, scrubbing down with water etc.
17Material and labour for rendering 15 mm thick in cement mortar 1:6 on fair faces of brick work or concrete surfaces, finished fair and even without using extra cement complete all as specified .
18M&L for preparation of new plastered wall surfaces and applying two coats of oil emulsion distemper over a coat of alkali resistant primer over two coats wall care putty complete all as specified and as directed. .
19M&L for complete removal of existing treatment of old painted wall surfaces and applying two coats of oil emulsion distember of approved shade over a coat of alkali resistant primer over two coats of white cement based wall care putty, incl necessary scaffolding etc complete all as specified and as directed by Engineer-in-charge.
20Completely removal of existing water proofing treatment of any descriptions and in any position (APP membrane, etc) and including demolition concrete padding with top layer of plaster, and roughening of concrete slab by picking, sweeping clean and washing down with water to remove dust etc and applying evenly cement slurry at the rate of 3kg / sqm over cleaned roof surfaces complete all as specified and as directed by Engr-in-charge.
21Material and labour for PCC 1:2:4 type BO (using 12.50mm graded stone aggregate) for roof ,kerbs or mud stops,rounded or chamfered on eds etc including mixing of admixture fosroc SP 430 of M/S Fosroc chemical @ 250ml per 50kg of cement over existing roof and in padding concrete to maintain required slope complete all as specified and as directed by Engr-in-charge. Note:- WPC will be measured and paid separetly under respective item.
22Supply only of admixture fosroc SP 430 ,Dr fixit Chemical all as specified and as directed by the Engineer-in-Charge.
23Material and labour for screed bed layer 10 mm thick in CM 1:4 on concrete surfaces of roof, mixed with integral water proofing compound @ 3% by weight of cement, finished even and smooth without using extra cement complete all as specified and directed. Note:- WPC will be measured and paid separetly under respective item.
24Supply liquid water proofing compound make Fos roc or equivalent make
25M & L for Premix Dr. Fixit Wonderproof 100 Components A and B using an electric double-paddle mixer for 2–3 minutes at low speed. Apply the first coat of Dr. Fixit Wonderproof 100 at a rate of 0.80–0.90 kg/m² without dilution, using a lamb’s wool or cloth roller. While the coating is still wet, roll and embed a 225 gsm Fiberglass Chopped Strand Mat, ensuring full bonding without air bubbles or wrinkles. Allow the first coat to dry for 3–4 hours. Apply the second coat at a 90° angle to the first. Overlap the chopped strand mat by at least 5 cm at the joints, ensuring the overlaps are sufficiently wet to achieve proper bonding. Once the surface is dry enough to walk on, apply the second coat at 0.70–0.80 kg/m². Apply additional coats as needed to achieve a total dry film thickness of 900–1000 microns, with a total system material consumption of 1.50 - 1.60 kg/m² over 2–3 coats. Note – Coating should be terminated below the drip mould on the vertical surface. The material has followed technical properties: Attains a Tensile Strength ≥ 18 N/mm2 as per ASTM D 2370; Crack bridging ability, Tear Strength ≥ 160 N/mm as per ASTM D 624, Dynamic Crack bridging as per EN 13251:2016 - No Cracks after 20000 sinusoidal cycles, Dynamic Crack bridging as per ASTM C 1305-2016 - Pass, No Crack, Pass Low Temperature Flexibility (-20 after 1000 Hrs. UV as per ASTM D 1970-2021, Shore A as per ASTM D2240 – 85 , Peel Adhesion to Concrete under wet Condition -24 Hrs. – N As per ASTM C 794 – 11.4 , Abrasion resistance (CS 17 Wheel -1000 Cycle, 1.0 Kg) as per ASTM D 4060 - 7 mg , Depth of Water Permeability @ 10 Bar as per EN 12390-8-2019 – Nil , Water Migratlon Resistance as per ASTM D 7281,-2007 - No Leakage, Pass Spread of flame Class A. Complies with the requirements of EN 13251:2016 for a 25-year service life when used with a 225 gsm Fiberglass Chopped Strand Mat as fleece. The system comes with 10 Years’ waterproofing warranty from M/S Pidilite Industries LTD. For vertical surfaces and parapet walls should be enveloped & coated / painted with Dr. Fixit Raincoat Classic or Dr. Fixit Raincoat Select Waterproof coating system.
26Dismantling stone slabs and tiles of any descritpion or thickness in floors/skirting laid bedded in any mortar complete all as specified and directed.
27S&F machine cut and machine polished, green marble, 16-18mm thick in single piece as in cooking platform bedded, window cill,Jambs, Trade, Riser, landing etc jointed and pointed with neat grey cement slurry and pointed with coloured or white cement with pigment to match over and including sreed bedding 15 mm thick in CM 1:4 all as specified and directed.
28all as per item no -27 but in verticle surface over 10 mm thick backing coat in CM 1:4 complete all as specified.
29Rounding to edges of stone slabs one edge such as in steps & platform etc
30Dismantling of floor, hearth or wall tiling including cement mortar bedding complete all as specified and directed.
31M&L for vertified ceramic tiles 9-10 mm thick joint free double charged (light shade of square/ rectangular) polished, area of each tiles not exc 0.36 sqm in floors etc,.set and jointed in neat cement slurry and pointed in white or coloured cement to match and including 15mm thick screed bed in CM 1:6 laying floor finished complete all as specified and directed.
32All as per above item no 31 but as in skirting over and including 10 mm thick backing coat with cement mortar 1:4 complete all as specified and as directed .
33Dismantling of wooden partition partly panneled and parly skelton with wooden frame of any description complete all as specified.
34Taking down chowkats of wooden/steel/aluminium/doors , windows ,complete with frames and shutters (without taking off the shutters) of area exc 1.5 sqm and not exc 4.00 sqm complete all as specified and directed.
35Taking down chowkats of wooden/steel/aluminium/doors ,windows,ventilations complete with frames and shutters (without taking off the shutters) of area not exc 1.5 sqm complete all as specified and directed.
36S&F factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 50mm x 100mm of required size and approved coloured comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum oxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal trength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardantand fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). ® Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. complete all as specified and as directed by engineer -in - charge.
37S&F Factory made 30 mm thick single extruded WPC (Wood Polymer Composite) both side laminated/ decorative of solid shutter comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. (Note: stainless steel butt hinges and necessary S S screws shall be paid separately)
38S&F Powder coated aluminium three track, three shutter (equal width) type window miniumum 50 micron anodised with frame made of aluminium sections of size 91.80 x 31.75 x 1.0mm and shutters made out of aluminium sections 39.4 x17.7 x 1.0mm without sash bars including necessary jointing cleats, glazing clips, rubber packing, anodised powder coated snap beadings, screws aluminium fittings lockings arragngements etc including 4.00mm thick sheet glass for glazed shutters and stainless steel wire cloth of 0.36mm nominal dia of wire and average width of aperture 1.40mm for wire gauge shutter all as specified and as directed, complete all as specified.
39S&F powder coated aluminium ventilator partly fixed type shutters,(powder coating of any colour thick ness not less than 50 micron ) without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, loking arrangements and including 4mm thick frostred glass etc complete all as specified and as directed
40S&F 300 mm long stain less steel sliding door bolt with sand or die-cast brass hasp, staple (bolt type) and fixing bolt with rolled or drawn brass bolts and fixedComplete all as specifiedand as directed by Engineer-in-Charge.
41S & F 100 mm size stain less steel Butt hinges, with mild steel hinge pin, bright polished and fixed, typeB-11 Complete all as specifiedand as directed by Engineer-in-Charge.
42S&F 150 mm long stain less steel handles, Complete all as specifiedand as directed by Engineer-in-Charge.
43S&F Stain less steel tower bolts, with cast or sheet barrel and rolled or cast bolts and fixed 200mm long. Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58547604
AUTHORITY Statutory Bodies & Commissions/Committees
TENDER VALUE 9.74 Lakhs
LAST DATE 09-12-2026
Authority
Authority Name Military Engineer Services
Work Description Tender for Provn Of Parking Shed In Technical Area & Addn/Altn Of Rooms For Integrated Weapon Training Simulator (Iwts) To Bld No.P-81 At Af Stn Lonavla. (8508/E8)
Basic Detail
Tender No GE/LONAVLA/8508/E8
Bidding Type Tender
Location
City Pune
State Maharashtra
Key Dates
Publish Date 16 Nov 2026
Submission Date 09 Dec 2026
Open Date 11 Dec 2026
Finance
Tender Value 9.74 Lakhs
Tender Fee 500
EMD 19500
Exemption Available
Document List
8508Tender.pdf
a93d34df-48dc-4c5e-bff3-ebbf3550499a.html
BOQ_896236.xls
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 16, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Dec 09, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 18 days
Dec 11, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 20 days

Tender Documents

Download All (ZIP) ↓
pdf

8508Tender.pdf

html

a93d34df-48dc-4c5e-bff3-ebbf3550499a.html

xls

BOQ_896236.xls

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender