Tender For Repairs To Plain Cement Concrete Hard Standing, Paths And Paved Area And Repairs To Compound Walls And Fencing, Retaining Wall, Shotcreting And Boulder Pitching At Aerial Bay Under Ge (S) Diglipur.
Tender Value
39.50 Lakhs
Estimated cost
Bid Submission
08 Dec 2026
16 days left
EMD
79000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
North and Middle Andaman → Andaman And Nicobar Islands
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repairs To Plain Cement Concrete Hard Standing, Paths And Paved Area And Repairs To Compound Walls And Fencing, Retaining Wall, Shotcreting And Boulder Pitching At Aerial Bay Under Ge (S) Diglipur.
BOQ
| Sl. No. | Item Description |
| 1 | Demolition of Reinforced cement concrete (reinforcement cut as required to facilate demolition) of any description and in any position not otherwise specifically provided for complete all as specified and as directed. |
| 2 | Demolition of brickwork or stone/ boulder masonry , built in cement mortar including all quoins, arches, pillors, etc., but excluding aslar facing , dressed stonework and precast concrete articles built in cement mortar complete all as specified and as directed. |
| 3 | Dismantling of Stone slabs in roofs, suspended floors, chajjas, landings, etc., any thickness, jointed in any mortar complete all as specified and as directed. |
| 4 | Dismantling structural steel work including doors, gates but excluding framed truss etc., complete all as specified and as directed. |
| 5 | Demolition of cement concrete of any description and in any position (unreinforced) in ground floor/paving/plinth n.exc. 15cm thick below or above ground level complete all as specified and as directed. |
| 6 | Taking down cement plaster on brick or stone wall or concrete surfaces including racking out joints, hacking for keys, scrubbing down with water etc., complete all as specified and as directed. |
| 7 | Dismantling posts or struts (wood, steel or R.C.C.) in concrete or brick work or masonry ground any section, including taking out embedded portion and making good disturbed ground complete all as specified and as directed. |
| 8 | Dismantling fencing wire mesh, any type and any size complete all as specified and as directed. |
| 9 | Demolition of cement concrete in any position not otherwise specifically provided and removal of debris to a distance exceeding 500mts and depositing complete all as specified and as directed. |
| 10 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed. |
| 11 | M&L for RCC precast cover slab type-B1 (1:2:4) (using 20mm graged stone aggregate ) set in CM (1:6) etc including necessary form work complete all as specified and as directed. |
| 12 | M&L for 75mm thick cement concrete type-D2 (1:4:8) (using 40mm stone aggregate) as sub base of flooring complete all as specified and as directed. |
| 13 | M&L for PCC flooring type-B1 (1:2:4) (using 20mm graged stone aggregate) 100mm thick over sub base complete all as specified and as directed. |
| 14 | M&L for chequered colour cement concrete tiles 30cmx30cmx25mm thick with grey cement and pigment set jointed and pointed in neat cement slurry in floors/steps including screen bed or bedding layer of morter 15mm thick in CM (1:6) complete all as specified and as directed. |
| 15 | M&L for Precast Cement Concrete solid block masonry exc. 10cm in width using PCC (1:3:6) type-C1 (using 20mm graded aggregate) set in cement mortar (1:6) complete all as specified and as directed. |
| 16 | M&L for rendering 15mm thick on fair faces of brick or concrete surfaces in cement mortar 1:4 complete all as specified and as directed. |
| 17 | M&L for preparation of newly plastered surface of wall and applying two coat of Weather based paint over primer complete all as specified and as directed. |
| 18 | M&L for 60 mm thick, machine made ,1st quality, precast cement concrete rubber moulded coloured interlocking paver blocks / tiles , of triangular / Zigzag / Haxagone, in shape or shap and designe as approved, with grey cement and no pigment, having crushing strength not less than 300 Kg / Sqcm and conforming to IS specifications including 25mm thick sand filling under complete all as specified and as directed. |
| 19 | M&L for kerb stones of PCC (1:2:4) Type-C1 (using 20mm graged aggregate )as in kerb stones etc. incl necessary formwork complete all as specified and directed. |
| 20 | M&L for forming 12mm thick expansion filled with pre-formed bituminious filler and top 30mm primed and sealed compound , grade \\"A\\" for 100mm thick cement concrete slab complete all as specified and as directed. |
| 21 | M&L for preparation of old surface of path/paved area and applying one coat of floor guard exterior paint as approved 1st quality and colour complete all as specified and as directed. |
| 22 | S&F Steel work in tubular trusses, guard railing including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240 complete all as specified and as directed. |
| 23 | M&L for preparation of new steel surface of any description over 10cm in width or girth and applying two coats of synthetic enamel paint over one coat of primer complete all as specified and directed. |
| 24 | M&L for Plain cement concrete (1:2:4) type-B0 (using 12.5mm graded stone aggregate) in coping, kneelers water throughs bed plates, kerbs and like including weathering, slightly rounded or chamfered engles and throating, finished even & smooth without using extra cement Complete all as specified and as directed. |
| 25 | S&F High strength deformed bars( TMT bars) 10 mm dia and over as in reinforcement for concrete cut to length , bent to shape requred, including cranking , bending spirally for columns hooking for columns hooking ends and binding with and including mild steel wire ( annealed ) not less than 0.9mm dia or securing with clips complete all as specified and as directed. |
| 26 | S&F High strength deformed bars( TMT bars) 6 to 8 mm dia as in reinforcement for concrete cut to length , bent to shape requred, including cranking, bending spirally for columns hooking for columns hooking ends and binding with and including mild steel wire ( annealed ) not less than 0.9mm dia or securing with clips complete all as specified and as directed. |
| 27 | M&L for RCC M-30 (Design Mix) (using 20mm graded stoe aggregate) as in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc., basement slabs, under-reamed piles and mass concrete complete all as specified and as directed. |
| 28 | M&L for RCC M-30 (Design Mix) using 20mm graded stoe aggregate as in Beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and as directed. |
| 29 | M&L for RCC M-30 (Design Mix) using 20mm graded stoe aggregate as in walls retaining walls, basement walls ballast walls and like, any thickness, above top of footing including attached pilasters and buttresses ccomplete all as specified and as directed. |
| 30 | M&L for RCC M-30 (Design mix) using 20mm graded stoe aggregate as in columns, pillars, piers, posts and struts complete all as specified and as directed. |
| 31 | M&L for Providing for flat formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter for rough finished surface complete all as specified and as directed. |
| 32 | M&L for Providing for flat Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers,lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc. complete all as specified and as directed. |
| 33 | M&L for Providing for flat formwork to faces of walls, retaining walls, abutments, parapets and staircase railings and similar work including attached pillasters, buttresses, etc.; vertical or to batter for rough finished surface complete all as specified and as directed. |
| 34 | M&L for Providing for flat formwork to faces of walls, retaining walls, abutments, parapets and staircase railings and similar work including attached pillasters, buttresses, etc.; vertical or to batter for fair finished surface complete all as specified and as directed. |
| 35 | M&L for Formwork of Square, rectangular or polygonal to sides of pillars, posts, struts, piers, columns and stanchions for fair finished surface complete all as specified and as directed. |
| 36 | Excavating in trenches, n.exc. 1.5 m wide and n.exc. 1.5 m in depth; for foundation, cable etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n.exc. 10 sqm on plan and getting out in soft/loose soil complete all as specified and as directed. |
| 37 | Removing excavated materials n exc. 50 m and depositing where directed at a level not exc. 1.5 m above the starting point complete as sepecified and directed. |
| 38 | Returning filling including spreading, levelling, watering and well ramming in layers n.exc. 25 cm soft/loose soil complete all as sepecified and as directed. |
| 39 | M&L for rolled mild steel in joist channel angles or tee sections fixed as in main and cross beams purlins rails and fasternings and heavy bracket framing (beam, tee angle channel or flat sections) including distance pieces, cleats etc Fe-410 W (Gde-E-250) quality-B complete all as specified and as directed. |
| 40 | M&L for mild steel work of Hand rails, half round or other stock section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts, posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and as directed. |
| 41 | M&L for Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing Fe-410-W(Gde-E-250) quality-B complete all as specified and as directed. |
| 42 | S&F in repairs Galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails strain- ing bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured) complete all as specified and as directed. |
| 43 | M&L for Restaining, resecuring including making good of existing barbed wire fencing including tying at crossings with galvanised mild steel wire, staples or steel pins, etc. complete all as specified and as directed. |
| 44 | S&F Concertina coil fencing with punched tape concertina coil made from high tensile spring steel, high corbon wire confirming to IS-4454 (Part-1) of Grade -SM duly hot dipped Galvanised as per IS-4826 with 230 GSM, 600mm dia 10 Meter openable length with galvanised coating and punched tape material as per IS-513, having 50 nos rounds per 6 mtr length (before stretching) having medium barbs (barb length 24+-1mm barb width 19+-1mm, pitch between two barbs 35+-1mm), spring core wire (2.6mm thick) of high tensile strength of 165 kg/sqmm with tape (0.52mm thick) and weight 43.478 Grams/meter and fixing to \\"Y\\" or Trapezoidal shaped angle iron brackets placed at 2.0 m to 3.0 m apart and with 6/9 horizontal RBT (Reinforced Barbed Tape) wire, stud tied with GI stable and GI clips to retain horizontal, including necessary bolts and coating with px compound (Anti rust) complete all as specified and as directed.Note: Horizontal barbed wire and angle iron support shall be measured and paid seperately under relevant items of Schedule \\"A\\". Measurement shall be made for stretch length. (Stretch per coil 10 m). |
| 45 | S&F 3mm thick PVC coated chain link fencing made of MS galvanisedd 4mm dia wire of mesh 75mmx75mm size to any type of standard rails, straining bolts etc including provn of GI wire for binding complete all as specified and as directed. |
| 46 | M&L for mild steel framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 complete all as specified and as directed. |
| 47 | M&L for Providing Precast Cement Concrete type-B0 (1:2:4) set in CM (1:4), louvres and jallies, 40mm thick (measured solid), including all mouldings but excluding frame complete all as specified and as directed. |
| 48 | M&L for preparation of old painted steel surface of any description not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint on steel surfaces complete all as specified and as directed. |
| 49 | M&L for boulder filling dry, of broken stones or boulders of gauge 80 to 150mm hand packed tightly behind weep holes complete all as specified and as directed. |
| 50 | M&L for 110 mm dia bore PVC (SWR) pipes, single socketed, in any length , with rubber rings joints in weep holes of retaining wall complete all as specified and as directed. |
| 51 | M&L for Plain Cement Concrete type-B2 (1:2:4) (used 40mm graded aggregate) in walls or retaining walls, any thickness, size or shape including pilasters, buttresses columns, pillars, boundary pillars and posts (including caps and bases) complete all as specified and as directed. |
| 52 | S&F in repair for 4mm dia galvanised steel wire, 150mmx100mm mesh, made up into mattresses or cages, lapped, wired and laid in position, including closing after filling complete all as specified and as directed. |
| 53 | M&L for hard core of broken stone or boulders of gauge n.exc. 63mm, deposited, spread, levelled in layers n.exc.15cm thick, watered and rammed to a true surface complete all as specified and as directed. |
| 54 | M&L for Plain Cement Concrete type-B0 (1:1.5:3) (using 12.5 mm graded crushed stone aggregate) in shotcreting method over GI wire mesh fixed on prepared earth surface complete all as specified and as directed. |
| 55 | S&F in repair for high strength deformed bars (TMT bars) 20mm dia and over as in land slide area insertion to a depth as ordered by Engr-in-Charge using soil nailing technique by mechanical means complete all as specified and as directed. |
| 56 | S&F in repair for 8mm dia 200mm long galvanised iron J-hook bolts fixed in holes and secured with MS plate 10cm x 10cm, 4 mm thick to the GI steel wire mesh in position and grouting holes with cement mortar (1:2) including forming mortice holes suitable to the size of J-hook bolts complete all as specified and as directed. |
| 57 | M&L for perforated 50 mm nominal bore galvanised iron pipe medium grade pipe ISI-1239 having perforation of exceeding 12mm dia and n.exc 25 mm @ 100 mm c/c in three rows duly fitted with (welded) mild steel conical shoe suitable for 50 mm pipe having wall thickness equal to thickness of pipe including drilling holes into hill shoe using rotary drilling technique complete all as specified and as directed. |
| 58 | M&L for Boulder pitching, laid dry, hand packed tightly is grouted with cement and sand mortar (1:6) complete all as specified and as directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 16, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedDec 08, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 16 daysDec 10, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 18 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender