Tender For Renovation/Upgradation Conference Hall Of Niranjan Auditorium At Nsg Manesar For The Year 2026-27.
Tender Value
22.33 Lakhs
Estimated cost
Bid Submission
23 Nov 2026
6 days left
EMD
44680
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Gurgaon → Haryana
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Renovation/Upgradation Conference Hall Of Niranjan Auditorium At Nsg Manesar For The Year 2026-27.
BOQ
| Sl. No. | Item Description |
| 1 | Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre. of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour. |
| 2 | Two coats. |
| 3 | Correction favtor @ 0.973 on DRSn items = 21420.00X0.973=20841.66-21420= -578.34 |
| 4 | Cost index @ 4.03%= 20841.66X4.03%= 839.92 |
| 5 | Providing and fixing Tongue & Groove Wooden Acoustical Panels of size - 190 X 2440 X 16 mm with micro perforation(3mm). (NRC 0.7 The Wooden Panel made of a High Density Fiber Board (HDMR) Substrate with with 1mmLaminated facing as per the approved Shade/species and finish and a Melamine balancing layer over the reverse side. The density of HDMR board should be more than 800kg/m3 . The HDMR board should be passed through vertically flammability test (UL94) & should be tested as for Anti-Fungal) with the help of special design Z clip as per Drawing and Design would be fixed on Aluminum Channel of size 15x25x19x7x.70mmx3000mm. GI frame work for wall paneling as per design drawing consisting of floor channel of size 50x32x32 x0.5mm thick at bottom and top fixed with 35 mm nylon sleeves and 35 mm screw. Further fixing GI stud 48x34x36x0.5 mm thick @600mm C/C vertically. The framework to be filled with 50mm 1000GSM non-woven thermal bonded polyester wadding ( Make Dupont/ Armstrong/Gyptech) held in position with 18 mm GI chicken mesh of 24SWG with drywall screws and oversize washers. Finally fixing over it horizontally 80x26x51x0.5 mm thick G.I. ceiling section placed @600mm C/C or wherever required as per design drawings with drywall screws and angle cleats 27x37x25x1.6 mm as required. The frame to be fixed to the walls by means of angle holdfasts or cleats of required size complete with expandable anchor fasteners of 65x10mm dia fixed on each vertical member @1000mm C/C etc. as required all complete as per the directions of Engineer-in-Charge. (Leaping & Beading for corner and other finishing will be paid extra) Make: Armstrong / Anutone/Gyptech or equavalent (MTC of the manufacturer along with NRC certificates will be required on installation). |
| 6 | Providing & fixing of 100% solution Dyed universal Nylon 6 carpet tile of 50cmx50cm, with construction as tufted high & low loop carpet tile, having a gauge of 1/10inch, stitches of 9 per inch, pile weight of 1020 g/m2 (30 oz/yd2), pile thickness of 5.0-8.0mm(±0.50mm), and total thickness of 9.0mm(±0.5mm), with ultra Eco PE Cushion backing. The carpet tile shall be packed in 20 pieces per carton (53.80 sqft) and shall meet or exceed international safety and performance standards incluidng flammability (ASTM E648-10) - Class 1, smoke density (ASTM E662)- Passed, and static propensity (AATCC-134)-Passed. |
| 7 | Providing and fixing of roller blinds of approved color and make for windows/Ventilation etc. all complete as per direction of engineer in charge |
| 8 | Providing and fixing of Fabric Acoustical Wall Paneling with square edges made of Rockwool with Glasswool Tissue substrate 25mm thick and wrapped on the front side with an acoustically transparent and fire-resistant fabric with an option of colors as per the choice of the Architect/ Engineering- in charge of size 600x1200 or 600x600 mm providing a minimum sound absorption level of 0.90 NRC. The GI stud system includes G.I Stud having Size 48 mm X 36 mm X 34 mm X 0.50mm, length 3600mm, and Floor Channel Size 50 mm X 32 mm X 32 mm X 0.50 mm, length 3600 mm is fastened vertically/ horizontally at every 600mm filled with 50mm 1000GSM non-woven thermal bonded polyester wadding. Then 8 mm Gyptech HDMR Board Perforated strips of 100 mm should be Screwed to the GI frame with the help of 25 X 6 mm metal screw 25mm thick fabric acoustical panel should be pasted on the 8 mm HDMR Board strips with the help of rubber base Adhesive of Pidilite or equivalent make as per drawing and design of Engineer-in-Charge. Make: Armstrong / Anutone/Gyptech or equavalent (Manufacturer Company MTC along with NRC certificate would be required at the time of installation). |
| 9 | Extra for CNC cut with required design and pattern in 06mm thick High pressure laminate (Exterior/interior Grade) all complete as per direction of engineer-in-charg. |
| 10 | Providing & fixing of 06mm thick both side High pressure interior Grade laminate of approved quality & make . These are EN 438-Part 6 complying panels, which are manufactured by high pressure and temperature in a hot press. The core of the panel consists of desired numbers of imported, long fibre virgin kraft papers, impregnated with specially formulated double hardened Phenolic resin and another top layer of imported virgin Blue wool scale passed, decorative paper layer impregnated with melamine resin. The panels are flame retardant type class 1 as per BS:476 Part 7, ASTM E84 and EN 438-Part 6. Poly-methyle methacrylate UV protecting films are provided at the top of the Deco layer for optimum UV protection (passes 1500Hrs). HPL panels have a tested Flexural Modulus of ≥ 11,000 MPa and Flexural strength of ≥ 100 MPa which makes the product enormously sturdy from inside. This product shows no distortion in extreme climatic changes such as from -20°C to +80°C or from dry climate to a relative humidity in excess of 85% - 90%. HPL panels are equipped with a maximum possible weather resistance at extreme oceanic climates as it has duly passed the salt spray test conducted for 500 Hours. HPL panels pass a 3000 hours artificial weathering and are rated with a 5 for Grey scale rating & 7/8 for Blue wool rating. Density is 1.45gm/cm3 with 10 years warranty the cladding system will be installed on aluminium frame work on wall or other surface for making grid of maximum size of 600x600mm(c/c) as frame work wall lining work using rectangular section of size 38.10x25.40x1.44mm or other equivalent sections of approved make conforming to IS:1285 i/c providing & fixing with SS Anchor/dash/wedge fasterners or required dia nd size, scaffolding etc. Aluminium sections shall be smooth , rust free, straight, mitres or unshared and jointed mechanically wherever required including cleat angle,etc. all complete as per architectural drawing and as per direction of engineer-in-charg.Installation will be done via rivets/adhesive and 3M tape. |
| 11 | Providing & fixing 2mm thick transparent acrylic sheet fixed with putty or silicon in steel doors, windows, clerestory windows, all complete as per direction of Engineer-in-charge. |
| 12 | Providing and fixing 25mm thick HDHMR board, one sides Pre-laminatedand other side balancing lamination grade I of approved brand and shade with suitable full threaded steel screws etc. in partitions, boxes, shelves, racks and cupboard, kitchen cabinet under kitchen counter etc. all complete as per direction of Engineer-in-charge |
| 13 | Electrical |
| 14 | Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. |
| 15 | Group C |
| 16 | Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit alongwith 1 No. 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required. |
| 17 | Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. |
| 18 | 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire |
| 19 | Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required. |
| 20 | 3 X 1.5 Sq.mm |
| 21 | 3 x4 Sq.mm |
| 22 | Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. |
| 23 | 20 MM |
| 24 | LED Panel light 2x2 ft. (System lumen efficacy ≥105 <120 lm/Watt) Supplying, installation, Testing & Commissioning of Panel light 2x2 ft., of following body material and construction as per IS : 10322 with driver as per the requirement with Driver efficiency >85%, Operating voltage AC 140-270 Volt, frequency 50/60 hz, Operating temp range -5 0C to 40 0C, internal surge protection of 2.5 KV with Short & Open circuit protection, THD < 10% , P. F.≥0.95, IP20, CRI >80, UGR (Unified Glare Rating) < 19, Flicker free, (flicker should be below 5 %), life time (LED, Driver & electrical circuitry), of minimum 50000 Burning Hours with, 70% of initial Lumen maintained till life ends as per LM80 extrapolation IES TM-21-11 report, CCT 3000°K / 4000°K / 5700°K /6500°K (As per ANSI Bin), SDCM(Standard Deviation Colour Matching) <3, Maximum power consumption should not more than the specified rating and Fixture shall be of relevant BIS standard. Manufactures Word Mark/ Name Engraved/ Embossing/ Screen printing on housing. complete in all respect i/c external connections with 1.5 sq mm FRLS/HFFR, PVC insulated copper conductor single core cable and earthing etc. as required with Minimum 5 year OEM warranty. System lumen efficacy ≥105 <120 lm/Watt output . LM79 & LM80 Test report and all testing required for LED fixtures as per BIS shall be submitted. Shape size and CCT shall be as approved by Engineer-in-Charge as per requirement. (Thermal management: heat sink of aluminium housing such that LED junction temperature shall not rise above 90°C). Powder coated die cast /Extruded aluminium Body (Thickness > 1.20 mm) |
| 25 | 36 watt |
| 26 | Supplying and fixing Plug top 16 A 3/6 Pin Plug top rating including connection etc. as required. |
| 27 | Supplying and fixing Plug top 6 A 3/6 Pin Plug Top rating including connection etc. as required. |
| 28 | Supply, installation, testing, and commissioning of recess 10 Watt LED downlighter , with a minimum system lumen output of 1000 lumens and a minimum system luminous efficacy of 100 lm/W, colour temperature of 5500K–6500K, average life L70B50: 50000 hours, THD ≤ 10%, suitable for operation on 140-270V, 1Φ, 50Hz AC supply system, complete with all accessories, electronic driver, diffuser, directly on the ceiling, including connections, earthing, etc. as required. |
| 29 | Supply, installation, testing, and commissioning of decorative flexible LED strip lights with IP 20 ratings, 140 V - 270 V in warm white colours, with provision for the driver , complete with connection, etc., as required. |
| 30 | Supply, installation, testing, and commissioning of driver for above item i.e. LED strip lights with IP 20 ratings, 140 V - 270 V in warm white colours, including the driver , complete with connection, etc., as required. |
| 31 | Supply & Fixing suitable size GI Box with modular plate and cover in front on surface or in reccess including provising and fixing 6 pin 5/6 and 15/16 amps moduler socket outlet and 15/16 amps moduler switch connection ect. as required. |
| 32 | Supplying and fixing suitable size GI box with modular plate and Black cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch, connections etc. as required. |
| 33 | Supplying and fixing following size/ modules, GI box along with modular base & black colour cover plate for modular switches in recess etc as required. |
| 34 | 1 or 2 Module (75mmX75mm) |
| 35 | Supplying and fixing following size/ modules, GI box along with modular base & black colour cover plate for modular switches in recess etc as required. |
| 36 | 3 Module (100mmX75mm) |
| 37 | Supplying and fixing following size/ modules, GI box along with modular base & black colour cover plate for modular switches in recess etc as required. |
| 38 | 4 Module (125mmX75mm |
| 39 | Supplying and fixing following size/ modules, GI box along with modular base & black colour cover plate for modular switches in recess etc as required. |
| 40 | 6 Module (200mmX75mm) |
| 41 | Supplying and fixing following size/ modules, GI box along with modular base & black colour cover plate for modular switches in recess etc as required. |
| 42 | 12 Module (200mmX150mm) |
| 43 | Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. Black colour |
| 44 | 5/6 amp switch |
| 45 | Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. Black colour |
| 46 | 3 pin 5/6 A socket outlet |
| 47 | Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. Black colour |
| 48 | 15/16 amp switch |
| 49 | Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. Black colour |
| 50 | 6 pin 15/16 A socket outlet |
| 51 | Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. Black colour |
| 52 | Call Bell |
| 53 | Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. Black colour |
| 54 | TV Socket |
| 55 | Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. Black colour |
| 56 | LAN Socket Outlet |
| 57 | Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. Black colour |
| 58 | Telephone socket outlet |
| 59 | Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. Black colour |
| 60 | 2 way switch |
| 61 | Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required. |
| 62 | Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. Black colour |
| 63 | USB Charger 20 watt |
| 64 | Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. Black colour |
| 65 | Female socket Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 16, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 23, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 6 daysNov 25, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 8 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender