Tender For Special Repair To Children Park Of Jayanth Park Under Ge Minniebay (8916/E8)
Tender Value
24 Lakhs
Estimated cost
Bid Submission
07 Dec 2026
16 days left
EMD
48000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
South Andamans → Andaman And Nicobar Islands
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Special Repair To Children Park Of Jayanth Park Under Ge Minniebay (8916/E8)
BOQ
| Sl. No. | Item Description |
| 1 | Demolition of cement concrete (unreinforced) in ground floors and pavings n.exc 15cm thickness ( below or above ground level) etc., complete all as specified and as directed. |
| 2 | Dismantling wrought iron or mild steel work of any description not other wise provided for complete all as specified and as directed. |
| 3 | Excavating over areas not exceeding 1.5m deep and getting out in Hard/dense soil complete all as specified and directed. |
| 4 | Excavation over areas exc. 1.5m and n. exc 3.0 m deep and getting out soft/loose soil complete all as specified and as directed. |
| 5 | M&L 100mm cement concrete type C-2 ,1:3:6 (40mm graded aggregate) in sub floors,sub bases,floors and pavings etc complete all as specified and as directed. |
| 6 | M&L formwork to sides of concrete foundation, footings, bases of columns, raft and raft beams, sides and soffits of foundation (if any) and plinth beams for fair finished surfaces of concrete, curved, complete all as specified and as directed. |
| 7 | M&L formwork to faces of walls, retaining/drain walls and similar work including attached pillasters, buttresses etc., vertical or to batter for fair finished surfaces of concrete, curved, complete all as specified and as directed. |
| 8 | M&L TMT bars 10mm dia and over as reinforcement cut to length, bent to shape required including cranking, bending, spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia complete all as specified and as directed. |
| 9 | M&L RCC M-30 nominal mix using 20 mm graded aggregate in Foundations, including rafts, footings, foundation beams; plinth beams, bases for columns, etc., basement slabs, under-reamed piles and mass concrete complete all as specified and as directed. |
| 10 | Returning, filling in, including spreading, leveling, watering and well ramming in layers not exceeding 25cm thick each layer as in soil complete all as specified and as directed. |
| 11 | Removal of excavated soil to a distance not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and as directed. |
| 12 | M&L for supply and spreading for providing of river sand from main land .sand shall not contain any pebble or stonesor sea shell any vegetration leaves/branches/roots of tre and shall not contain silt more than 50% complete all as specified and as directed. |
| 13 | S&F of single play Station (Tyre play) with metal frame of the equipment shall be made of hot-dip galvanized iron pipe of 'B' class heavy duty. Fiber components are made from high-gloss fiber-reinforced plastic (FRP) with a minimum thickness of 6 mm. These parts shall be reinforced to ensure durability and strength, and they offer high resistance to ultraviolet rays with a minimum tensile strength of 60 MPa. All metal components shall have a dual layer of PP powder coating, with a thickness ranging from 120 to 200 microns. Pipe ends shall be covered with pipe closing caps made from polypropylene or nylon (polyamide) with high melting points and excellent sunlight resistance. Fasteners including GI/SS bolts with a locking feature shall be covered with plastic caps for added safety as specified and directed by Engineer-in-Charge. Make : Arihant Indistrial Crporation Ltd |
| 14 | S&F of single play Station (Summit climber) with metal frame of the equipment shall be made of hot-dip galvanized iron pipe of 'B' class heavy duty. Fiber components are made from high-gloss fiber-reinforced plastic (FRP) with a minimum thickness of 6 mm. These parts shall be reinforced to ensure durability and strength, and they offer high resistance to ultraviolet rays with a minimum tensile strength of 60 MPa. All metal components shall have a dual layer of PP powder coating, with a thickness ranging from 120 to 200 microns. Pipe ends shall be covered with pipe closing caps made from polypropylene or nylon (polyamide) with high melting points and excellent sunlight resistance. Fasteners including GI/SS bolts with a locking feature shall be covered with plastic caps for added safety as specified and directed by Engineer-in-Charge. Make : Arihant Indistrial Crporation Ltd |
| 15 | S&F of single play Station (Maps 70) with metal frame of the equipment shall be made of hot-dip galvanized iron pipe of 'B' class heavy duty. Fiber components are made from high-gloss fiber-reinforced plastic (FRP) with a minimum thickness of 6 mm. These parts shall be reinforced to ensure durability and strength, and they offer high resistance to ultraviolet rays with a minimum tensile strength of 60 MPa. All metal components shall have a dual layer of PP powder coating, with a thickness ranging from 120 to 200 microns. Pipe ends shall be covered with pipe closing caps made from polypropylene or nylon (polyamide) with high melting points and excellent sunlight resistance. Fasteners including GI/SS bolts with a locking feature shall be covered with plastic caps for added safety as specified and directed by Engineer-in-Charge. Make : Arihant Indistrial Crporation Ltd |
| 16 | S&F of single play Station (Roto Spiral slide) with metal frame of the equipment shall be made of hot-dip galvanized iron pipe of 'B' class heavy duty. Fiber components are made from high-gloss fiber-reinforced plastic (FRP) with a minimum thickness of 6 mm. These parts shall be reinforced to ensure durability and strength, and they offer high resistance to ultraviolet rays with a minimum tensile strength of 60 MPa. All metal components shall have a dual layer of PP powder coating, with a thickness ranging from 120 to 200 microns. Pipe ends shall be covered with pipe closing caps made from polypropylene or nylon (polyamide) with high melting points and excellent sunlight resistance. Fasteners including GI/SS bolts with a locking feature shall be covered with plastic caps for added safety as specified and directed by Engineer-in-Charge. Make : Arihant Indistrial Crporation Ltd |
| 17 | S&F of single play Station (Maps 76) with metal frame of the equipment shall be made of hot-dip galvanized iron pipe of 'B' class heavy duty. Fiber components are made from high-gloss fiber-reinforced plastic (FRP) with a minimum thickness of 6 mm. These parts shall be reinforced to ensure durability and strength, and they offer high resistance to ultraviolet rays with a minimum tensile strength of 60 MPa. All metal components shall have a dual layer of PP powder coating, with a thickness ranging from 120 to 200 microns. Pipe ends shall be covered with pipe closing caps made from polypropylene or nylon (polyamide) with high melting points and excellent sunlight resistance. Fasteners including GI/SS bolts with a locking feature shall be covered with plastic caps for added safety as specified and directed by Engineer-in-Charge. Make : Arihant Indistrial Crporation Ltd |
| 18 | S&F of Multiplay Station (Grid fortress) with metal frame of the equipment shall be made of hot-dip galvanized iron pipe of 'B' class heavy duty. Fiber components are made from high-gloss fiber-reinforced plastic (FRP) with a minimum thickness of 6 mm. These parts shall be reinforced to ensure durability and strength, and they offer high resistance to ultraviolet rays with a minimum tensile strength of 60 MPa. All metal components shall have a dual layer of PP powder coating, with a thickness ranging from 120 to 200 microns. Pipe ends shall be covered with pipe closing caps made from polypropylene or nylon (polyamide) with high melting points and excellent sunlight resistance. Fasteners including GI/SS bolts with a locking feature shall be covered with plastic caps for added safety as specified and directed by Engineer-in-Charge. Make : Arihant Indistrial Crporation Ltd Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 16, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedDec 07, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 16 daysDec 09, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 18 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender