Road Transport and Highways Government Departments Closing in 27 days TDR #58547294

Tender For Improvements To Huilgol-Balaganur-Lingdal Road Mdr Km.11.90 To Km.12.40 Gadag Taluk Gadag Dist Under Central Road Infrastructure Fund. ( Job No.Crif-Knt-2026-27-244)

Issued by Government Departments · Gadag, Karnataka
Tender Value
97.87 Lakhs
Estimated cost
Bid Submission
15 Dec 2026
27 days left
EMD
1.95 Lakhs
Bank guarantee accepted
Document Fee
2447
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Gadag → Karnataka
EMD Exemption
Not Available
Quantity
Not Available

Project Description

Tender for Improvements To Huilgol-Balaganur-Lingdal Road Mdr Km.11.90 To Km.12.40 Gadag Taluk Gadag Dist Under Central Road Infrastructure Fund. ( Job No.Crif-Knt-2026-27-244)

BOQ

Name of Work:- Improvements to Huilgol-Balaganur-Lingdal Road MDR Km.11.90 to Km.12.40 Gadag Taluk Gadag Dist under Central Road Infrastructure Fund. ( Job No.CRIF-KNT-2026-27-244)
Sl. No. Item Description
1Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, including removal and disposal of top organic soil not exceeding 150 mm in thickness including all labour, hire charges of all machineries etc., complete. ii.A. Light Jungle with all lead and lifts, and as per the directions of Engineer-in-charge of the Work
2Scarifying the existing bituminous surface to a depth of 50 mm and disposal of scarified material within all lifts and leads including all labour, usage charges of all machinery etc., complete. i) By Mechanical Means using Hydraulic excavator, with all lead and lifts, and as per the directions of Engineer-in-charge of the Work
3Excavation for roadwork in soil by hydraulic excavator including cutting and loading in tippers, trimming bottom and side slopes, in accordance with requirements of lines, grades and cross sections, and transporting to the embankment location, with all lifts and lead,including all labour, usage charges of all machinery etc., complete. with all lead and lifts, and as per the directions of Engineer-in-charge of the Work
4Construction of Subgrade and Earthen ShouldersConstruction of sub-grade and earthen shoulders with approved material obtained from borrow pits, transporting to site, spreading, grading to required slope and compacted to meet requirement of table No. 300-2 laid in layers not exceeding 250 mm thick and compacting it by mechanical means after adding water to its OMC, so as to achieve 97% compaction of maximum dry density and finish the surface to the required camber, grade and cross section etc., speading, grading by motor grador, consolidation by roller including all lead, lifts, loading, unloading, all labour, usage charges of machinery etc., complete. (New road formation) with all lead and lifts, and as per the directions of Engineer-in-charge of the Work
5Granular Sub-Base Construction of granular sub-base by providing spreading in uniform layers with motor grader on prepared surface mixing by mix in place method with front end loader at OMC and compacting with vibratory roller to achieve the desired density, complete as per clause 401, including protection of edges of GSB layer, cost of all materials, labour, usage charges of all machinery, lighting, guarding, barricading, maintenance of diversion road, loading & unloading all lead, lifts etc., complete. (Compacted thickness) (Table:- 400-1) Place mix method - B(v)-Grading-V Material (Close graded) with all lead and lifts, and as per the directions of Engineer-in-charge of the Work
6Wet Mix Macadam Providing, laying, spreading and compacting graded stone aggregate as per table 400-12 & 400-13, to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers in sub- base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density of 98% including protection of edges of WMM layer, cost of all materials, labour, usage charges of all machinery, lighting, guarding, barricading, maintenance of diversion road, loading & unloading all lead, lifts etc., complete, (Compacted thickness).B.Laying Using Grader, with all lead and lifts, and as per the directions of Engineer-in-charge of the Work
7Plain Cement Pavement Quality M30 grade Concrete (RMC)with OPC & GGBS laid without PaverConstruction of un-reinforced plain cement concrete pavement using RMC M-30 grade with OPC @ 270 kg/m3 and GGBS@ 90 kg/m3 (75:25 proportion) as per approved mix design procedure and thickness as per design, over a prepared sub base. The superplastisiser confirming to IS 9103-1999 Reaffirmed-2008 ,Coarse aggregates and Fine aggregate confirming to IS:383-2016, transported to site, laid in approved fixed side form work (steel channel, laying and fixing of 125 micron thick polythene film, wedges, steel plates including levelling the form work). Spreading the concrete with shovels, rackers and compacted using needle, suitable plate vibrator and finished in a continuous operation including provision of separation membrane and Hessian cloth finishing to lines and grades complete including cost of all materials, labour, all lead & lift, loading charges as per specification & direction of Engineer - incharge of the work.
8Providing Cement Concrete interlaying blocksProviding and laying of 60 mm thick factory made pre cast M 30 grade Cement Concrete Paver Block as per IRC SP 63:2018 & IS 15658 for Cycle Tracks & Pedestrian Footpaths of approved shape and colour, laid in required pattern and including over 30mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete with all lead and lifts, and as per the directions of Engineer-in-charge of the Work
9Groove Cutting: Cutting transverse contraction joints 3 to 4 mm wide and depth 60mm in concrete slab using concrete cutting machine with diamond studded saw within 4-8 hours of casting of bay / slab etc. complete including subsequent widening of the groove 8 to 10 mm. wide at top having depth of 15 mm. with all lead and lifts, and as per the directions of Engineer-in-charge of the Work
10Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads at 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35. The finished surface to be level, uniform and free from streaks and holes, including, barricading, traffic diversion as per IRC-35, cleaning the surface of dirt, dust and other foriegn matter, demarcation at site, traffuc control,cost of all materials all labour, lead, lifts, loading, unloading transporting etc., complete.i) 2.5 mm thick
11Supplying and Fixing of Molded Shank Raised Pavement Markers / Cat's eye made ofpolycarbonate and ABS moulded body and reflective panels with micro prismatic lenscapable of providing total internal reflection of the light entering the lens face and shallsupport a load of 16000 kg tested in accordance to ASTM D 4280 Type H and complying toSpecifications of Category A of MORTH Circular No RW/NH/33023/10-97 DO III Dt 11.06.1997. The height, width and length shall not exceed 50 mm, 100 mm and 102 +/- 2 mm andwith minimum reflective area of 13 cm2 on each side and the slope to the base shall be 35 +/- 5 degree. The strength of detachment of the integrated cylindricalshanks, (of diameter not less than 19 +/- 2 mm and height not less than 30+/- 2 mm) from the body is to be a minimum value of 500 Kg. Fixing will be by drilling holes on the road forthe shanks to go inside, without nails and using epoxy resin based adhesive as per manufacturer's recommendation and complete as directed by the engineer.The contractor shall submit at wo year warranty for satisfactory field performance including stipulated retro-reflectance of the reflecting panel, to the Engineer as per the MoRTH specification 806with all lead and lifts, and as per the directions of Engineer-in-charge of the Work
12Providing and fixing of retro- reflectorised cautionary, mandatory and informatory sign as per IRC :67 made of Class-B Type IV reflective sheeting fixed over 2 mm thick aluminium sheeting vide clause 801.3, 4mm thick Aluminium composite material sheet including lettering depending on the size of the sign fixed over back support frame of min 25 x 25 x 3mm Angle mounted on a mild steel circular pipe 65 NB 3.60mtrs high (min effective height 1.90 mtrs),3.2 mm thickness firmly fixed to the ground by means of properly designed foundation with M25 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing. The sign shall be maintained as per section 12 of IRC 67, including curing, cost of all materials all labour, lead, lifts, loading, unloading transporting etc., complete.(ii) 90 cm equilateral triangle,with all lead and lifts, and as per the directions of Engineer-in-charge of the Work
13Direction and Place Identification Signs upto 0.9 sqm Size Board.-Providing and erecting direction and place identification retro-reflectorised sign as per IRC :67 made of high intensity grade sheeting vide clause 801.3, fixed over aluminium sheeting, 2 mm thick or Aluminum composite material sheet with overall thickness of 4mm with area not exceeding 0.9 sqm fixed over back support frame of min 35 x 35 x 3mm Angle mounted on a mild steel circular pipe 65 NB 3.20 mm thick, 3.60mtrs hight, firmly fixed to the ground by means of properly designed foundation with M25 grade cement concrete 45 x 45 x 60 cm, 60 cm below ground level as per approved drawing, including curing, cost of all materials all labour, lead, lifts, loading, unloading transporting etc., complete.with all lead and lifts, and as per the directions of Engineer-in-charge of the Work
14Providing and fixing Renforced cement concrete M15 grade Kilometre stone of standard design as perIRC 8-1980 and IRC:26, excavation and fixing in position in M-15 concrete, plastering the exposed faces with CM 1:2, curing, painting and printing letters, necessary reinforcements etc,. including cost of all materials, labour, loading unloading lead lift , transporting etc., complete.with all lead and lifts, and as per the directions of Engineer-in-charge of the Work Kilometer Stone
15Hectometer Stone
16Providing and erecting Project Display Board of size 1.80 verticalx1.60M Horizontal made of Cold Rolled Coil Sheet 16 Guage (1.6mm thickness) sheeting sthrenghtened by welding to MS angle of size 35x35x5mm iron framework on all sides, extra cross vertical angle fixed using nuts and bolts, base of the board shall be cleaned, applying red oxide and black paint by sprayer on both sides of the board and all MS iron frameworks, background of the facing side of the board painted in traffic yellow, project information written in English/Kannada/Hindi, painting letters and numerals in black, fixed on a mild steel angle iron post 75 mm x 75 mm x 6 mm, 2 Nos. firmly fixed to the ground by means of properly designed foundation with M 15 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level and the board 2.8M from ground level as per approved drawingincluding cost of all materials all labour, lead, lifts, loading, unloading transporting etc., complete.directed by engineer.with all lead and lifts, and as per the directions of Engineer-in-charge of the Work
17Network Survey Vehicle (NSV) attached with SUV Data collection of Longitudinal profiling (International roughness Index) . Transverse profiling (Rut depth) Pavement texture in terms of Mean profile depth , Road Geometry data, (Cross slope, gradient, curvature), GPS Coordinates (X, Y, Z) viz longitudinal, latitude & altitude, Video Imaging for Road side furnitures / Road assets and Video imaging for pavement surface Distress and reports.
18Earth work in excavation of foundation of structures as per drawing and technical specification, including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom and backfilling with approved material, including all labour, usage charges of machinery, lead, lifts, loading, unloading transporting etc., complete.Ordinary soil - Mechanical Means (Depth upto 3 m)with all lead and lifts, and as per the directions of Engineer-in-charge of the Work
19PCC 1:3:6 in Foundation - Providing & laying Plain cement concrete 1:3:6 nominal mix in foundation with crushed stone aggregates 40mm nominal size mechanically mixed, placed in foundation and compated by vibration including curing,including cost of all materials all labour, usage charges of machinery, lead, lifts, loading, unloading transporting etc., complete.with all lead and lifts, and as per the directions of Engineer-in-charge of the Work
20Providing & laying Plain/Reinforced Cement Concrete in open foundation complete as per drawing & tecnical pecification for Pipe Culvert complete as per Drawing and Technical Specifications, including cost of all materials, formwork, centering, vibrating, compacting,all labour, usage charges of machinery, lead, lifts, loading, unloading transporting, stacking, curing, finishing the exposed faces etc., complete. (excluding cost of steel and fabrication charges) RCC Grade M20 using batching plant transit mixer & manual placingwith all lead and lifts, and as per the directions of Engineer-in-charge of the Work
21Providing TMT Steel bar reinforcement conforming to IS-1786, FE-500 Grade designation as per table 1000-3 including straightening bars, cutting, bending, hooking, binding with approved quality binding wire after placing in position, tieing, lapping and or welding wherever required and anchoring to the adjoining members wherever necessary as per drawing (laps, hooks and wastages shall not be measured and paid) including cost of all materials, bar bending charges, labour, lifts etc., complete.with all lead and lifts, and as per the directions of Engineer-in-charge of the Work Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58547294
AUTHORITY Government Departments
TENDER VALUE 97.87 Lakhs
LAST DATE 15-12-2026
Authority
Authority Name Ministry Of Road Transport And Highways
Work Description Tender for Improvements To Huilgol-Balaganur-Lingdal Road Mdr Km.11.90 To Km.12.40 Gadag Taluk Gadag Dist Under Central Road Infrastructure Fund. ( Job No.Crif-Knt-2026-27-244)
Basic Detail
Tender No EE/NH/HBL/PB1/2/2026/27/1533-4 Dt16/11/2026
Bidding Type Tender
Location
City Gadag
State Karnataka
Key Dates
Publish Date 16 Nov 2026
Submission Date 15 Dec 2026
Open Date 16 Dec 2026
Finance
Tender Value 97.87 Lakhs
Tender Fee 2447
EMD 1.95 Lakhs
Exemption Not Available
Document List
244KW3.pdf
2cf9efd5-6944-4c59-924a-ebf6457e9310.html
BOQ_981925.xls
Documentstobesubmit.pdf
Generalconditions244.pdf
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 16, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Dec 15, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 27 days
Dec 16, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 28 days

Tender Documents

Download All (ZIP) ↓
pdf

244KW3.pdf

html

2cf9efd5-6944-4c59-924a-ebf6457e9310.html

xls

BOQ_981925.xls

pdf

Documentstobesubmit.pdf

pdf

Generalconditions244.pdf

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender