Power Government Departments Closing in 14 days TDR #58546398

Tender For Modernisation/ Strengthening/ Upgradation Of Divisional Workshop Including Supply And Installation Of Testing Equipments, Chain Pully Blocks And Associated Items For Division Ivth Khanyar, Srinagar,Under Ut Capex-2026-27.Scheme Code: Pddss

Issued by Government Departments · Srinagar, Jammu and Kashmir
Tender Value
5 Lakhs
Estimated cost
Bid Submission
07 Dec 2026
14 days left
EMD
10000
Bank guarantee accepted
Document Fee
200
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Srinagar → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available

Project Description

Tender for Modernisation/ Strengthening/ Upgradation Of Divisional Workshop Including Supply And Installation Of Testing Equipments, Chain Pully Blocks And Associated Items For Division Ivth Khanyar, Srinagar,Under Ut Capex-2026-27.Scheme Code: Pddss2627100218

BOQ

Name of Work:- Modernisation/ Strengthening/ Upgradation of Divisional Workshop including supply and installation of testing equipments, chain pully blocks and associated items for Division IVth Khanyar, Srinagar,under UT Capex-2026-27.Scheme code: PDDSS2627100218
Sl. No. Item Description
1Supply, Installation, Testing & Commisioning of following
2Autoranging AC/DC Clamp/ Hook On Meter with probes and Case cover, Jaw Size: 55mm, AC Current: 1000A Max for 1 Min, DC Current: 1200A
3Digital Insulation Resistance Tester - Voltage Testing Range 5000V, Meg ohmmeter Insulation Resistance 200G ohms.
45000V-5000 Meg Ohms Analogue Insulation Tester Hand Driven housed in anti-Magnetic metal body. Silent Generator, Accurate & Quick response Confirms to ISS : 2992/1987
5Corded Electric Impact Drill, 600 W, 13 mm, 3,000 rpm, 1.4 Nm, Impact rate at no-load speed- 0 – 48,000 bpm; Rated torque- 1.4 Nm;
6Digital Micrometer, Durable High Accuracy Electronic Micrometer, 0-25mm, LCD Digital Display
712 Volt Seal Maintenance Free (SMF) Lead Acid type, Fresh 150 Ah capacity at 20°C suitable for DG set 62.5kVA, Min 3 years unconditional replacement guarantee.
8Drilling Machine with 3 phase motor and stand heavy duty alongwith Drill Bits of sizes.
9Hydraulic crimping tool with die's ranging from 10-400mm
103 Phase Automatic Transformer Turn Ratio Meter
11Digital Micro Ohm Meter with Calibration Certificate
12Upgradation of Three Phase Contactor from 20 Amp to 32 Amp for Temperature Control Oven.
13Upgradation of manual temperature controller to Digital PID Temperature Controller with Timer.
14Upgradation of analogue circuit for Voltage Control alongwith Auto/Manual Circuit board for 100kVA AVR to Digital Voltage Control module for Auto/ Manual shifting and High Cut and Low Cut Voltage Cutoff for 100kVA AVR.
15Upgradation of 1HP Wrench Motor for 30 feet iron shutter for Divisional workshop with Clutch assembly alongwith Chain gears to 2HP Wrench Motor for 30 feet iron shutter for Divisional workshop.
16Upgradation of Motors for OHT Crane from 2 HP to 3 HP with Clutch assembly.
17Making of Foundation Base Bed and Canopy for 62.5kVA Dedicated Generator Backup Supply for Electric Sub Division Workshop.
18Earthing of Generator Set by way of excavation of earth pit of dia 650 mm & depth 3000 mm, installation of Earthing pipe of 40 mm Nominal bore & 4mm wall thickness & length 2.5 mtr long as Per IS 1239.GI Strip for neutral earthing of size 75mm x10mm & 50mm x 6mm for connection to Generator as per IS 2629/85, GI nuts & bolts, refilled with earth enhancement materials and earth Chamber made of brick masonary with RCC slab cover.
19Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)
20Centering and shuttering including strutting, propping etc. and removal of form for: Foundations, footings, bases of columns etc. for mass concrete.
21Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more.
22Smooth finishing of the exposed surface of RCC work with 6mm thick cement mortar 1:3 (1 cement: 3 fine sand) including curing.
23Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. Welded
24Laying of RCC foundation including proper curing. 200mm X 200mm X 500mm (RCC with concrete ratio 1:1.5:3 with template comprising of 4 Nos. of M10 100mm Long longitudinal MS Anchor Bolts with Nuts & Washers for fixing the pole and MS Base Plate 150mmX150mmx6mm). As per Drawing.
25Providing and fixing precoated galvanized iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.
26Providing ridges or hips of width 60cm overall width plain G.S. sheets fixed with polymer coated J or L hooks, bolts and nuts 8mm dia G.I. limpet and bitumen washers complete 0.80 mm thick with zinc coating not less than 275 gram/m2
27Providing and fixing flashing of 40cm overall width in plain G.S. sheets fixed with polymer coated J or L hooks, bolts and nuts G.I. limpet and bitumen washers complete, bent to shape and fixed in wall with cement mortar 1:3 (1 cement : 3 coarse sand). 1.00 mm thick with zinc coating not less than 275 gram/m2
28Providing and fixing 15cm wide 45 cm overall semi circular plain G.S. sheet gutter with iron brackets 40x3mm size, bolts, nuts and washers etc. including making necessary connections with rain water pipes complete. 0.80 mm thick with zinc coating not less than 275 gram/m².
29Providing flat iron brackets 50 x 3 mm size with necessary bolts, nuts and washers etc. for fixing asbestos cement/ G.S. sheets gutters with purlins.
303X1.5 mm² PVC insulated multistrand flexible copper wire for service connections from connection plate to luminary individual circuit including loop & earthings laid properly.
31Plastic Conduit Pipe 1\\" Dia.
32Bulb Holder Socket.
33Plastic Box enclosures for Light Switches.
345A Plastic Light Switches.
3510 Watt LED Bulbs. Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58546398
AUTHORITY Government Departments
TENDER VALUE 5 Lakhs
LAST DATE 07-12-2026
Authority
Authority Name Power Development Department
Work Description Tender for Modernisation/ Strengthening/ Upgradation Of Divisional Workshop Including Supply And Installation Of Testing Equipments, Chain Pully Blocks And Associated Items For Division Ivth Khanyar, Srinagar,Under Ut Capex-2026-27.Scheme Code: Pddss2627100218
Basic Detail
Tender No e NIT NO ED IV 28 OF 2026
Bidding Type Tender
Location
City Srinagar
State Jammu and Kashmir
Key Dates
Publish Date 16 Nov 2026
Submission Date 07 Dec 2026
Open Date 09 Dec 2026
Finance
Tender Value 5 Lakhs
Tender Fee 200
EMD 10000
Exemption Not Available
Document List
09fe837d-d547-47ce-a8fa-891e24b43ff3.html
BOQ_1124418.xls
SBD28.pdf
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 16, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Dec 07, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 14 days
Dec 09, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 16 days

Tender Documents

Download All (ZIP) ↓
html

09fe837d-d547-47ce-a8fa-891e24b43ff3.html

xls

BOQ_1124418.xls

pdf

SBD28.pdf

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender