Rural Development Government Departments Closing in 12 days TDR #58545813

Tender For Construction Of Hl Bridge Over River Kelua At 5Th Km On Mundamal To Deoda Road Under Sby For The Year 2024-25 In The Dist Of Jajpur.

Issued by Government Departments · Khordha, Odisha
Tender Value
48.88 Crore
Estimated cost
Bid Submission
04 Dec 2026
12 days left
EMD
48.88 Lakhs
Bank guarantee accepted
Document Fee
10000
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Khordha → Odisha
EMD Exemption
Available
Quantity
Not Available

Project Description

Tender for Construction Of Hl Bridge Over River Kelua At 5Th Km On Mundamal To Deoda Road Under Sby For The Year 2024-25 In The Dist Of Jajpur.

BOQ

Name of Work:- Construction of HL bridge over river Kelua at 5th Km on Mundamal to Deoda road under SBY for the year 2024-25 in the Dist of Jajpur.
Sl. No. Item Description
1Earthwork in excavation for bridge works in all kinds of soil, by mechanical means utilising the surplus earth locally for road work where ever required, back filling the excavated earth to the extent required complete in all respect as per approved drawing and technical specifications as per Section 900 and Clause 301 & 304 of MoRT&H Specifications for Road & Bridge works (5th Revision) & including cost of all labour, T&P, royalty etc complete and as per direction of the Engineer-in-Charge.
2Providing , fitting, fixing and placing in position steel cutting edge including cost of steel etc required as per approved drawing and technical specifications as per Section 1200 & 1900 of MoRT&H Specifications for Road & Bridge works (5th Revision) and as per direction of the Engineer-in-charge.
3Providing all machineries , labour, T&P & sinking of single circular well of specified external diameter through all types of soil / rock as specified below as shown against each case complete as per drawing & technical specification section 1200 of MoRT&H Specifications for Road & Bridge works (5th Revision) and as per direction of the Enginer-in charge. (Depth of sinking is reckoned from bed level. In all kinds of soil (Upto 10m. Depth)a) For 7.50m dia abutment wells
4b) For 7.50m dia Pier wells
5c) For 6.50m dia. pier wells
6For 11th successive mtr deptha) For 7.50m dia abutment wells
7b) For 7.50m dia Pier wells
8c) For 6.50m dia. pier wells
9For 12th successive mtr deptha) For 7.50m dia abutment wells
10b) For 7.50m dia Pier wells
11c) For 6.50m dia. pier wells
12For 13th successive mtr deptha) For 7.50m dia abutment wells
13b) For 7.50m dia Pier wells
14c) For 6.50m dia. pier wells
15For 14th successive mtr deptha) For 7.50m dia abutment wells
16b) For 7.50m dia Pier wells
17c) For 6.50m dia. pier wells
18For 15th successive mtr deptha) For 7.50m dia abutment wells
19b) For 7.50m dia Pier wells
20c) For 6.50m dia. pier wells
21For 16th successive mtr deptha) For 7.50m dia abutment wells
22b) For 7.50m dia Pier wells
23c) For 6.50m dia. pier wells
24For 17th successive mtr deptha) For 7.50m dia abutment wells
25b) For 7.50m dia Pier wells
26c) For 6.50m dia. pier wells
27For 18th successive mtr deptha) For 7.50m dia abutment wells
28b) For 7.50m dia Pier wells
29c) For 6.50m dia. pier wells
30For 19th successive mtr deptha) For 7.50m dia abutment wells
31b) For 7.50m dia Pier wells
32c) For 6.50m dia. pier wells
33For 20th successive mtr deptha) For 7.50m dia abutment wells
34b) For 7.50m dia Pier wells
35c) For 6.50m dia. pier wells
36For 21st successive mtr deptha) For 7.50m dia abutment wells
37b) For 7.50m dia Pier wells
38c) For 6.50m dia. pier wells
39For 22nd successive mtr deptha) For 7.50m dia abutment wells
40b) For 7.50m dia Pier wells
41c) For 6.50m dia. pier wells
42For 23rd successive mtr deptha) For 7.50m dia abutment wells
43b) For 7.50m dia Pier wells
44c) For 6.50m dia. pier wells
45For 24th successive mtr deptha) For 7.50m dia abutment wells
46b) For 7.50m dia Pier wells
47c) For 6.50m dia. pier wells
48For 25th successive mtr deptha) For 7.50m dia abutment wells
49b) For 7.50m dia Pier wells
50c) For 6.50m dia. pier wells
51For 26th successive mtr deptha) For 7.50m dia Pier wells
52b) For 6.50m dia. pier wells
53For 27th successive mtr deptha) For 7.50m dia Pier wells
54b) For 6.50m dia. pier wells
55For 28th successive mtr deptha) For 7.50m dia Pier wells
56For 29th successive mtr deptha) For 7.50m dia Pier wells
57For 30th successive mtr deptha) For 7.50m dia Pier wells
58For 31st successive mtr deptha) For 7.50m dia Pier wells
59For 32nd successive mtr deptha) For 7.50m dia Pier wells
60For 33rd successive mtr deptha) For 7.50m dia Pier wells
61For 34th successive mtr deptha) For 7.50m dia Pier wells
62Providing PCC of grade M-15 with 10% extra cement for bottom plugging of abutment & pier wells as per approved drawing and technical specifications as per Section-900, 1000, 1200 & 1700 of MoRT&H specifications for Road & Bridge works (5th Revision)and as per direction of the Engineer-in-charge.
63Providing PCC of grade M-15 for top plugging of abutment and pier wells as per approved drawing and technical specifications as per section-900, 1000, 1200 & 1700 of MoRT&H Specifications for Road & Bridge works (5th Revision) and as per direction of the Engineer-in-charge.
64Providing RCC grade of M-25 concrete in well curb/Well steining &Hand Railing. as per approved drawing and technical specifications as per Section 900, 1000, 1200, 1500, 1700,2200 & 2700 of Ministry of Road Transport & Highways (5th Revision) & and as per direction of the Engineer-in-charge. WELL CURB
65Well steining
66Providing RCC of grade M-30 in superstructure wearing coat & approach slab etc. as per approved drawing and technical specifications as per Section 900, 1000, 1500, 1600, 1700, 2200, 2300 & 2700 of MoRT&H specifications for Road & Bridge works (5th Revision) and as per direction of the Engineer-in-Charge. WELL CAP
67Abutment & Pier Shaft
68Dirt walls
69Super structure
70Approach Slab
71Retaining Wall
72Providing R.C.C of grade M 35 in Well cap, steining, well curb & shaft etc including cost of all materials, labour, machineries, T & P, centering and shuttering, cost of suspended type staging , supported on girders with M.S. bracket arrangment for cantilever portion including cost for all materials and labour for shuttering complete as per approved drawing and technical specification section 1000, 1500, 1600, 1700, 2300 & 2700 of MoRT&H specifications for Road & Bridge works (5th Revision) and as per direction of the Engineer-in-Charge.Well Cap
73Pier Shaft
74Well steining
75Well Curb
76Providing R.C.C of grade M 40 in crash barrier, Pile cap & pedestal over the pier caps including cost of all materials, labour, machineries, T & P, centering and shuttering, cost of suspended type staging , supported on girders with M.S. bracket arrangment for cantilever portion including cost for all materials and labour for shuttering complete as per approved drawing and technical specification section 1000, 1500, 1600, 1700, 2300 & 2700 of MoRT&H specifications for Road & Bridge works (5th Revision) and as per direction of the Engineer-in-Charge.CRASH BARRIER
77Pier caps
78Pedestals
79Providing R.C.C of grade M 45 in superstructure of Bow sring girder including cost of all materials, labour, machineries, T & P, centering and shuttering, cost of suspended type staging , supported on girders with M.S. bracket arrangment for cantilever portion including cost for all materials and labour for shuttering complete as per approved drawing and technical specification section 1000, 1500, 1600, 1700, 2300 & 2700 of MoRT&H specifications for Road & Bridge works (5th Revision) and as per direction of the Engineer-in-Charge.
80Supply, fabrication & erection of steel bow-string girder of 61.28 m overall span as per RDSO (E350-IS:2062) specification and standard drawing of RW Department etc complete including all labour, material & machines etc complete
81Metallizing of steel work of girders with sprayed aluminium after surface preparation by sand/grit blasting, followed by one coat of each primer (IS:5666) & one coat of ZINC chrome primer (IS:104) and two coats of aluminium paint (IS:2339) with all labour, T&P and material as a complete job duly conforming to all relevant specifications and process given under clause 39 of IRS-B1-2001. (Nominal thickness of sprayed aluminium coating shall be 150 microns, DFT of Zinc chrome primer shall be 25-30 microns and DFT of each coat of Aluminium paint shall be 12-14 microns)
82Providing & laying of wearing course of 56mm thick consisting of 6mm thick mastic asphalt and 50 mm thick asphaltic concrete on top of the Deck slab. The mastic asphalt shall be of paving grade bitumen meeting the requirement given in the table 500-39, prepared by using mastic cooker and laid to required level & slope after cleaning the surface, applying prime coat & tack coat all complete as per clause 501, 502, 503 & 516 of MoRT&H Specification for road & bridge works (5th revision), followed by asphaltic concrete to be laid in two layers of 25mm thick each over tack coat etc complete as per approved drawing & technical specification Clause No 503 & 507 of MoRT&H specifications for road & Bridge work (5th revision) and as per direction of the Engineer-in-charge.
83Providing ,Cutting, Bending, Binding, Straightening & Placing of HYSD bars of grade Fe 500 D confirming to I.S.1786-2008 in bridge works and other structural works etc as per drawing and technical specification and as per Section.900, 1000, 1100 1200, 1600,2100, 2200, 2300 & 2700 of specifications for Road and Bridge works of MORT & H (5th Revision) & including cost of all materials, labour, T&P, royalty etc complete in all respect and as per direction of the Engineer-in-charge.
84Providing and laying of filter media/ metal spall backing in the rear side of retaining wall,abutment etc using hard broken granite stone aggregate of graded to the required thickness with smaller size towards the soil and bigger size towards the wall and provided over the entire surface behind abutment and retaining wall/ wing wall of bridge works etc to the full height compacted to a firm condition complete as per approved drawing and technical specifications as per Section 900 & 2500 of MoRT&H Specifications for Road & Bridge works (5th Revision) and as per direction of the Engineer-in-Charge.
85Providing weep holes in PCC/RCC structures such as abutments ,wing walls, protection walls of bridge work and retaining wall etc with 100mm dia A.C./PVC pipe extending full width of concrete including providing filter materials in the rear side of walls as per approved drawing and technical specifications as per Section 2200 & 2700 of MoRT&H Specifications for Road & Bridge works (5th Revision) and as per direction of the Engineer-in-Charge.
86Providing Rough stone dry packing in aprons and revetments, stone pitching in slopes and boulder apron of CD works etc with hard granite stone of size 30cm (minimum) and above and weighing not less than 40kg/each as per approved drawing and section 2500 (clause-2504) of specifications for road and bridge works of Ministry of Road Transport & Highways (5th revision) & including cast of all materials, labour, T & P , Royality etc complete in all respect and as per direction of the Engineer-In-Charge
87Providing & back filling of specified materials behind abutment, wing wall and return wall complete as per approved drawing and technical specifications complete in all respect as per Section 900, 1000 & 2500 of MoRT&H Specifications for Road & Bridge works (5th Revision) including cost & conveyance of all materials, labour, T&P, royalty etc complete and as per direction of the Engineer-in-Charge. a) Granular Material
88b) Boulder with sand grouted
89c) In Abutment / Pier Wells
90Providing and fixing R.C.C. of grade M-20 in guard posts of 600mm height and 15 cm diameter including cost of steel reinforcement for finished item of work as per approved drawing and technical specifications complete in all respect as per Section 800, 900, 1000, 1500, 1600 & 1700 of MoRT&H Specifications for Road & Bridge works (5th Revision) and as per direction of the Engineer-in-Charge.
91Providing, fitting and fixing Modular strip seal expansion joints as per approved drawing and technical specifications as per Section 2600 of MORT & H Specifications for Road & Bridge works (5th Revision) and as per direction of the Engineer-in-charge.
92Providing Plain Cement concrete (1:3:6) mix with crushed stone aggregate of 4cm nominal size mechanically mixed ,placed in foundation & below approach slab compacted by vibrator, providing groove & beads where necessary including curing, dewatering, shoring, shuttering if necessary at the time of laying concrete with cost, conveyance royality & taxes of all material required for the work including supplying & working pumps, T&P articles finishing the exposed surface smooth as per section 2100 of MoRT&H specifications for Road & Bridge works (5th Revision) and as per direction of the Engineer-in-Charge.Below approach Slab
93Below foundation of structures
94Providing & fixing of POT-PTFE bearing procured from approved manufacturer with test certificates as per specification provided in drawing at location with all accessories complete & fixing on piers in position with all materials, labour, tools, equipment for fixing as per drawings and technical specifications section 2000 & its relevant clauses & sub clauses of MoRT&H specifications for Road & Bridge works (5th Revision) and as per direction of the Engineer-in-Charge.
95Providing & Fixing drainage spout with 100mm dia GI pipe in deck slab with MS grating as per Clause-2705 under Section 2700 of MORT&H specifications for Road & Bridge works (5th Revision) and as per direction of the Engineer-in-Charge.
96Providing & Fixing PVC 150mm pipe dia as approvd quality in crash barrier for utility service complete including full comensation to all inclusive costs, all operations contingencies, incidentals involved in the finished defect free item of work as per Drawings and directions of the Engineer or his representative to satisfaction
97Providing and applying two coats of Enamel paint over a coat of primer to unplastered concrete surface after cleaning the surface of dirt, dust, oil, grease, efflorescense and applying paint @ 1 litre per 02 Sqm including cost of painting , all materials, T&P required for the work complete for the finished item of work as per technical specifications as per Section 800 of MoRT&H Specifications for Road & Bridge works (5th Revision) and as per direction of the Engineer-in-Charge.
98Providing and erecting Informatory retro-reflectorised sign as per IRC-67-2012 made of class-B retro-reflective sheeting of high intensity prismatic grade sheeting as per ASTMD4956-09type-III and IV strictly conforming to clause 6.7of IRC67-2012 and vide clause 801.3, fixed over aluminium sheeting, 2.00mm thick as per clause 6.5.2 of IRC:67-2012 or A.C.P (Aluminium Composite Panel) used for sign boards with a thermo plastic core of blow density polythylene (LDPE) between two thick sheets of aliminium with over all thickness of 4mm and aliminium thichness of 0.5mm on both sides supported on mildsteel square post 80mmx80mmx3mm, 2nos and 5nos horizontal and 3no vertical extra supporting member of M.S pipe of size 50mmx50mmx3mm firmly fixed to the ground by means properly designed foundation withM-15 grade cement concrete 90cmx90cmx15cm, 150cm below ground level of as per approved drawing including cost, conveyance, royality, taxes of all materials, labour, T&P, excavation, curingetc. complete,under supervision of Engineer-In-Charge. Size-12'X8'(3657mm x 2438mm Rectangle)
99Providing & Construction of embankment in all kind of soil with approved materials obtained from borrow pits with all lifts and leads transporting to site, spreading, grading to required slope and compacting to meet required density etc complete as per section 900 &Clause No.305 of specifications for Road and Bridge works of Ministry of Road Transport & Highways (5th Revision) & including cost of all materials, labour, T&P, royalty etc complete in all respect and as per direction of the Engineer-in-charge. (By Mechanical means)
100Loosening, leveling and Compacting original ground supporting embankment to facilitate placement of first layer of embankment, scarified to a depth of 150 mm, mixed with water at OMC and then compacted by rolling so as to achieve minimum dry density as given in table 300-2 for embankment construction & as per clause 305 of MoRT&H specifications for road & bridge works(5th revision) and as per direction of the Engineer-in-Charge.
101Providing & construction of Granular subbase by providing crushed stone close graded materials of Grading-III as per table 400-1, spreading in uniform layers on prepared surface, mixing by mix in place method with rotavator at OMC and compacting with vibratory power roller to achieve the desired density complete as per Clause-401 of MoRTH specifications for Roads & Bridge works (5th Revision) and as per direction of the Engineer-in-Charge.
102Providin, laying, spreading & compacting graded stone aggregate to Wet Mix Macadam specification including pre mixing the material with water at OMC in mechanical mix plant/pugmill, carriage of mixed material by tipper to site, laying in uniform layers with paver in sub base/base course on well prepared surface & compacting with vibratory roller to acieve the desired density as per clause 406 of MoRTH specifications for road & bridge works (5th Revision) and as per direction of the Engineer-in-Charge.
103Providing and applying primer coat on the prepared surface of granular base with slow setting bitumen emulsion (Grade S.S.-1) as per approved drawing and technical specifications Section 900 and Clause 501.5.2 & 502 of MoRT&H Specifications for Road & Bridge works (5th Revision) and as per direction of the Engineer-in-Charge.
104Providing and applying tack coat on the prepared bituminous surface including cleaning with mechanical broom spraying @ 0.30kg/sqm with rapid setting bitumen emulsion (Grade R.S.-1) as per approved drawing and technical specifications as per Section 900 and Clause 501.5.2 & 503 of MoRT&H Specifications for Road & Bridge works (5th Revision) and as per direction of the Engineer-in-Charge.
105Providin & laying Bituminous Macadam with hot mix plant using crushed aggregates of specified grading premixed with bituminous binder of viscosity grade bitumen of VG-30, transported to site, laid over previously prepared surface with hydrostatic paver finisher with sensor control to the required grade, level & alingment & roling with smooth wheeled,vibratory & tandem rollers to achieve the desired compaction as per clause 501.5.2 & 504 of MoRT&H Specifications for road and bridge works (5th Revision) as per direction of the Engineer-in-Charge.
106Providing and laying compacted Semi Dense Bituminous Concrete (Grading-2) with Batch type Hot Mix Plant using crushed stone aggregates of specified grading, premixed with bituminous binder of 60/70 (VG-30) viscosity grade of bitumen, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibtratory and tandem rollers to achieve the desired compaction as per approved drawing and technical specifications complete in all respect as per Section 900, Clause 501 & 507 of MoRT&H Specifications for Road & Bridge works (4th Revision) & including cost & conveyance of all materials, labour, T&P, royalty etc complete and as per direction of the Engineer-in-Charge.
107Earthwork in excavation in foundation in hard soil, by mechanical means utilising the surplus earth locally for road work where ever required, back filling the excavated earth to the extent required complete in all respect as per approved drawing and technical specifications as per Section 900 and Clause 301 & 304 of MoRT&H Specifications for Road & Bridge works (5th Revision) & including cost of all labour, T&P, royalty etc complete and as per direction of the Engineer-in-Charge.
108Providing and laying P.C.C M-15 grade in Protection walls /Toe wall/ Retaining Wall/ HP culvert and other structures as per approved drawing and technical specifications complete in all respect as per Section 900, 1000, 1500, 1700, 2100 & 2900 of MoRT&H Specifications for Road & Bridge works (5th Revision) and as per direction of the Engineer-in-Charge. In foundation
109Providing, laying and fixing in position reinforced cement concrete NP4 hume pipes conforming to the requirement of IS-458 over cement craddle bedding of PCC- M15 grade for culverts over prepared surface including pointing ends fixing collars with cement mortar 1:2 for finished item of work as per Section 1000 & 2900 of specifications for road and bridge works of Ministry of Road Transport & Highways (5th Revision) & including cost of all materials, labour, T&P etc complete in all respect and as per direction of the Engineer-in-charge.1000 mm dia Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58545813
AUTHORITY Government Departments
TENDER VALUE 48.88 Crore
LAST DATE 04-12-2026
Authority
Authority Name Rural Works Department
Work Description Tender for Construction Of Hl Bridge Over River Kelua At 5Th Km On Mundamal To Deoda Road Under Sby For The Year 2024-25 In The Dist Of Jajpur.
Basic Detail
Tender No Tender Online -04/2026-27(Bridges)
Bidding Type Tender
Location
City Khordha
State Odisha
Key Dates
Publish Date 16 Nov 2026
Submission Date 04 Dec 2026
Open Date 05 Dec 2026
Finance
Tender Value 48.88 Crore
Tender Fee 10000
EMD 48.88 Lakhs
Exemption Available
Document List
91acd08c-4c04-4563-8936-d74624af70d3.html
BOQ_621344.xls
Tendernotice_1.pdf
Tendernotice_2.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 16, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Dec 04, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 12 days
Dec 05, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 13 days

Tender Documents

Download All (ZIP) ↓
html

91acd08c-4c04-4563-8936-d74624af70d3.html

xls

BOQ_621344.xls

pdf

Tendernotice_1.pdf

pdf

Tendernotice_2.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender