Rural Development Government Departments Closing in 1 days TDR #58545811

Tender For Construction Of Day Care Sub Center Cum Health Wellness Center Building At Saraskana Under Saraskana Block Of State Plan 2025-26.

Issued by Government Departments · Mayurbhanj, Odisha
Tender Value
60.05 Lakhs
Estimated cost
Bid Submission
23 Nov 2026
1 days left
EMD
60055
Bank guarantee accepted
Document Fee
10000
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Mayurbhanj → Odisha
EMD Exemption
Available
Quantity
Not Available

Project Description

Tender for Construction Of Day Care Sub Center Cum Health Wellness Center Building At Saraskana Under Saraskana Block Of State Plan 2025-26.

BOQ

Name of Work:- Construction of Day Care Sub Center cum Health Wellness center building at Saraskana Under Saraskana Block of state plan 2025-26.
Sl. No. Item Description
1Earthwork in excavation of foundation in all kinds of soil including dressing and levelling the bed to required depth and width and deposting the excavated materials away from work site as directed by Engineer in charge.
2Filling foundation and plinth with sand well watered and rammed with cost carriage of all materials etc.
3Cement concrete 1:3:6using 4cm size bhg. Metal with cost carriage of all materials and labour etc.
4R.C.C. work of M-20 using 20 mm and dowm graded cb. Chips with cost carriage of all materials etc. complete. Column Base
5Grade Beam
6Column
7Lintel
8Chajja
9Roof beam
10Stair case
11Roof slab
12Supplying fitting and placing uncoated HYSD bar reinforcement complete as per drawing and technical specification.
13Fly ash Brick massonary in c.m. 1:6 having crushing strength 75kg/cm2 with cost carriage of all materials etc.
14Superstructure
15Fly ash Brick massonary in c.m. 1:4 in superstructure having crushing strength 75kg/cm2 with cost carriage of all materials etc.
1616 mm thick c.p. 1:6 over brick work in finished smooth with cost carriage of all materials etc.
1712mm thick c.p. 1:6 over brick work in finished smooth with cost carriage of all materials etc.
186mm thick c.p. 1:4 for RCC work with cost of all materials and labour etc.
19Supplying, fitting and fixing vitrified tile in floors of size 600mm x 600mm of colour/printed approved make conforming to IS: 13755 laid to 20mm thick cement mortar(1:4) (1 cement : 4 course sand) and filling joints with white cement of approved quality including cost of all materials, labour T&P etc required for the work all complete as per direction of Engineer-in-Charge. ( For New work Only)
20Fixing Granite tiles above 0.40sqm in floors,treads and landings on 25mm thick bed of cement mortar (1:1) joined with neat cement slurry mixed with pigment to match the shade of the tiles including rubbing and polishing including cost of tile.
21Fixing vertified wall tiles in dados, (600mm x 600mm) skirting and in rises of steps on 12mm thick bed of cement plaster (1:3) joined with neat cement slurry mixed with pigment to match the shade of the tiles including rubbing and polishing including cost of tile.
22Supplying, fitting and fixing Anti-Skid ceramic tile in floors, treads of steps and landing on 20mm thick cement mortar(1:4) (1 cement : 4 course sand) and filling joints with white cement of approved quality including cost of all materials, labour T&P etc required for the work all complete as per direction of Engineer-in-Charge. ( For New work Only)
23Supplying and fixing MS Window Grill and Grill gate including cost of fabrication and cost,conveyance taxes etc. complete. (A/R page-225 /4)
24providing fitting and fixing M.S. Door grills and grill gate made out of M.S. angle with flat with cost of all materials etc.
25providing fitting and fixing M.S. window grills and grill gate made out of M.S. angle with flat with cost of all materials etc.
26Providing fitting fixing stainless steel hand railing with cost of all mateerials etc.
27Providing and fixing 65mm x 125mm factory made single extruded WPC (Wood polymer composite) solid door/window/ceosetory windows & other Frames/chowkhat comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/rice husk/wheat husk) and non toxic additives (Maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modulus of elasticity 900N/mm2 and resistance to spread of flame of class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with M.S hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-charge. (Make: WPC:Century/Black Cobra/Rajshri Plastiwood, Hardware fitting: Godrej/Dorset/Link/Dorma)
28Providing and fixing 30mm factory made single extruded WPC (Wood polymer composite) solid plain flush door shutter of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/rice husk/wheat husk) and non toxic additives (Maximum toxicity index of 12 for 100 gms) having minimun density of 650 kg/cum and screw withdrawal strength of 1800 N (face) & 900 N (Edge), minimum compressive strength of 50 N/mm2, modulus of elasticity 850N/mm2 and resistance to spread of flame of class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with SS 304 Grade matt finished 3 Nos butt hinges of size 100mmx60mmx2.5mm, 1 No 250mmx16mm AIdrop, 1 No 150mmx16mm tower bolt, 2 No 150mm length Door handle with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-in-charge. (Make: WPC:Century/Black Cobra/Rajshri Plastiwood, Hardware fitting: Godrej/Dorset/Link/Dorma)
29UPVC SLIDING WINDOWS Two track two panels sliding window made of (big series) frame 67 x 50 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Ref.-DSR-Page-549, Item-9.147D.3)
30Finishing walls with water based acrylic wall putty with any approved shade with cost of all materials etc.
31Priming one coat with any approved shade with cost of all materials etc.
32Finishing walls with plastic emulsion paint two coats any approved shade with cost of all materials etc.
33Finishing walls with weather seal coat paints two coats any approved shade with cost of all materials etc.
34Priming one coat with any approved primer including cost of primer over iron work etc. complete.
35Painting two coats with any approved paint including cost of paints over iron / Wood works.
36FIRST FLOOR R.C.C. work of M-20 using 20 mm and dowm graded cb. Chips with cost carriage of all materials etc. complete. Column
37Lintel
38Chajja
39Roof beam
40Stair case
41Roof slab
42Supplying fitting and placing uncoated HYSD bar reinforcement complete as per drawing and technical specification.
43Fly ash Brick massonary in c.m. 1:6 having crushing strength 75kg/cm2 with cost carriage of all materials etc.
44Fly ash Brick massonary in c.m. 1:4 in superstructure having crushing strength 75kg/cm2 with cost carriage of all materials etc.
4516 mm thick c.p. 1:6 over brick work in finished smooth with cost carriage of all materials etc.
4612mm thick c.p. 1:6 over brick work in finished smooth with cost carriage of all materials etc.
476mm thick c.p. 1:4 for RCC work with cost of all materials and labour etc.
48Supplying, fitting and fixing vitrified tile in floors of size 600mm x 600mm of colour/printed approved make conforming to IS: 13755 laid to 20mm thick cement mortar(1:4) (1 cement : 4 course sand) and filling joints with white cement of approved quality including cost of all materials, labour T&P etc required for the work all complete as per direction of Engineer-in-Charge. ( For New work Only)
49Fixing Granite tiles above 0.40sqm in floors,treads and landings on 25mm thick bed of cement mortar (1:1) joined with neat cement slurry mixed with pigment to match the shade of the tiles including rubbing and polishing including cost of tile.
50Fixing vertified wall tiles in dados, (600mm x 600mm) skirting and in rises of steps on 12mm thick bed of cement plaster (1:3) joined with neat cement slurry mixed with pigment to match the shade of the tiles including rubbing and polishing including cost of tile.
51providing fitting and fixing M.S. Door grills and grill gate made out of M.S. angle with flat with cost of all materials etc.
52providing fitting and fixing M.S. window grills and grill gate made out of M.S. angle with flat with cost of all materials etc.
53providing fitting and fixing M.S. window grills and grill gate made out of M.S. angle with flat with cost of all materials etc.
54Providing fitting fixing stainless steel hand railing with cost of all mateerials etc.
55Providing and fixing 65mm x 125mm factory made single extruded WPC (Wood polymer composite) solid door/window/ceosetory windows & other Frames/chowkhat comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/rice husk/wheat husk) and non toxic additives (Maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modulus of elasticity 900N/mm2 and resistance to spread of flame of class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with M.S hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-charge. (Make: WPC:Century/Black Cobra/Rajshri Plastiwood, Hardware fitting: Godrej/Dorset/Link/Dorma)
56Providing and fixing 30mm factory made single extruded WPC (Wood polymer composite) solid plain flush door shutter of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/rice husk/wheat husk) and non toxic additives (Maximum toxicity index of 12 for 100 gms) having minimun density of 650 kg/cum and screw withdrawal strength of 1800 N (face) & 900 N (Edge), minimum compressive strength of 50 N/mm2, modulus of elasticity 850N/mm2 and resistance to spread of flame of class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with SS 304 Grade matt finished 3 Nos butt hinges of size 100mmx60mmx2.5mm, 1 No 250mmx16mm AIdrop, 1 No 150mmx16mm tower bolt, 2 No 150mm length Door handle with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-in-charge. (Make: WPC:Century/Black Cobra/Rajshri Plastiwood, Hardware fitting: Godrej/Dorset/Link/Dorma)
57UPVC SLIDING WINDOWS Two track two panels sliding window made of (big series) frame 67 x 50 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Ref.-DSR-Page-549, Item-9.147D.3)
58Finishing walls with water based acrylic wall putty with any approved shade with cost of all materials etc.
59Priming one coat with any approved shade with cost of all materials etc.
60Finishing walls with plastic emulsion paint two coats any approved shade with cost of all materials etc.
61Finishing walls with weather seal coat paints two coats any approved shade with cost of all materials etc.
62Priming one coat with any approved primer including cost of primer over iron work etc. complete.
63Painting two coats with any approved paint including cost of paints over iron / Wood works.
64SECOND FLOOR (HEAD ROOM) R.C.C. work of M-20 using 20 mm and dowm graded cb. Chips with cost carriage of all materials etc. complete. Column
65Lintel
66Roof beam
67Roof slab
68Supplying fitting and placing uncoated HYSD bar reinforcement complete as per drawing and technical specification.
69Fly ash Brick massonary in c.m. 1:6 having crushing strength 75kg/cm2 with cost carriage of all materials etc.
7016 mm thick c.p. 1:6 over brick work in finished smooth with cost carriage of all materials etc.
7112mm thick c.p. 1:6 over brick work in finished smooth with cost carriage of all materials etc.
726mm thick c.p. 1:4 for RCC work with cost of all materials and labour etc.
73providing fitting and fixing M.S. Door Shutter made out of M.S. angle with flat with cost of all materials etc.
74Finishing walls with water based acrylic wall putty with any approved shade with cost of all materials etc.
75Priming one coat with any approved shade with cost of all materials etc.
76Finishing walls with plastic emulsion paint two coats any approved shade with cost of all materials etc.
77Finishing walls with weather seal coat paints two coats any approved shade with cost of all materials etc.
78Priming one coat with any approved primer including cost of primer over iron work etc. complete.
79Painting two coats with any approved paint including cost of paints over iron / Wood works.
80Approch Road Earthwork in excavation of foundation in all kinds of soil including dressing and levelling the bed to required depth and width and deposting the excavated materials away from work site as directed by Engineer in charge.
81Filling foundation and plinth with sand well watered and rammed with cost carriage of all materials etc.
82Cement concrete 1:3:6using 4cm size bhg. Metal with cost carriage of all materials and labour etc.
83Supplying and fixing of 80mm thick cement concrete interlocking paver block of M-40 grade of approved make, design, colour and size made by Block making machine with proper compaction laid in required pattern etc. complete in all respect conforming to IRC SP-63:2018.
84Earth work for embankment in hard soil.( with mechanical means)
85Dismantling Dismantling and removing R.C.C. Column , Beam, Slab, Stair case, Landing, lintel including etc. stacking the useful materials for reuse and removing the debris within 50 m lead
86Dismantling Brick or stone masonry in lime or cement mortar under 3m height inluding stacking the useful materials for reuse and removing the debris within 50 m lead etc complete
87Dismantling and removing old tile flooring including removing the base coarse and stacking the usful materials for reuse etc.coomplete (A/R Page-223 , item No.28)
88Dismantling and removing doors, windows & ventilators including removal of frame,hinges,fastenings and stacking the useful materials for reuse and removing the debris within 50m lead.
89Dismantling and removing 2.5 cm thick grading concrete from roof slab cleaning the surface lowering and removing the debris within 50 m lead etc complete
90Removing old lime or cement plaster from walls including racking out joints 12mm deep and stacking the useful materials for reuse and removing the debris within 50m lead.
91E.I Recessed wiring to light point with 1.5 sq.mm FR PVC insulatedsingle core multistrand copper conductor of ISI marked with 20 mm dia non-metalic PVC flexible conduit with 5Amp, 250 V piano type modular switch ISI marked and ceiling rose ISI marked mounted on MS box having front Modular base & cover of suitable size , MS box with 1.5sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accesories and connection as per direction of Engineer in Charge. ( Make of wire Finolex/ L&T / Anchor / Havels /HPL/ V Guard ) -do- Group A
92-do- Group B
93-do- Group C
94Recessed wiring to Fan Point in -do- Group B
95Recessed wiring to Call Bell Point in -do- Group C
96Recessed wiring to Exhaust Fan Point in -do- Group B
97S/F of fan hook 'S' type made of 16 mm MS rod for fixing in the Existing RCC Roof.
98S/F of Angle holder replacing Ceilling Rose
99Switch Boards S/F of 5A. Modular Switch & 5A. Modular Socket outlet of ISI marked on existing board
100S/F of extension board of 6 modular Metal box with modular base & cover in recess including providing and fixing of 2 nos of 3pin 5/6amp modular socket out let & 2 nos of 5/6 amp piano type modular switch, connection, painting etc as required.
101S/F of Power point with 4 modular metal box with modular base & cover in recess including providing and fixing of 5 pin 15/16 amp. piano type Modular switch & Socket, connection, painting etc as required
102S/F of Power point with 4 modular & 2 modular metal box with modular base & cover in recess including providing and fixing of 5 pin 15/16 amp. piano type socket, 32A Modular Starter switch & Mini DP MCB, connection, painting etc as required for AC
103S/F of computer board consisting of 3 nos of 5amp modular plug and modular switch & 1 no of Mini MCB complete with wiring on 12 modular M.S. box with modular cover.
104S/F of 1 no of 5 pin 15/16 amp. Socket , 1 no of switch & 1 no of 15/16A top with modular mini MCB, in 6 modular box with cover with connection, painting etc as required for Inverter connection
105S/F of 18 SWG Modular metal box of following sizes (Nominal size) in recess with suitable size of Modular base & cover in front including cutting the wall and making good the same in case of recessed conduit as required. 2 Modular box with base & cover
1064 Modular box with base & cover
1076 Modular box with base & cover
1088 Modular box with base & cover
10912 Modular box with base & cover
110Sub-Main Wiring for circuit / sub-main wiring along with earth wire with following sizes of PVC insulated single core multistrand copper conductor with ISI marked conforming to IS-694/1990 in 20mm dia non metalic heavy duty flexible conduit 1.6mm in recessed PVC conduit as required (Make of wire - Finolex/L&T/Anchor/Havels/V-guard) 2x1.5+1x1.5 (1.8.1)
1112x2.5+1x1.5 (1.8.2)
1122x4+1x1.5 (1.8.3)
1132x6+1x2.5 (1.8.4)
114Inverter wiring (1x1.5smm) Copper wire (1.19.1)
115Circuit Breakers S/F of 'B/C/D' series SP MCB of 5 - 32A amp rating (As per direction of engineer in charge) 240Volt for lighting and other loads in the existing MCB Distribution board ISI marked complete with connection, testing and commissioning etc. as required single pole (SP) (2.6.1)
116S/F of 'B/C/D' series DP MCB of 5 - 32A amp rating (As per direction of engineer in charge) 240Volt for lighting and other loads in the 2 Way double door MCB Distribution board ISI marked complete with connection, testing and commissioning etc. as required (2.6.2a)+(2.3.1b)
117Supply, Installation testing & commissioning of Main Switches (IS13940 part 3/1993) of following coopacity on existing surface/wall mounting & complete with H.R.C fuse links, inter connections earthing etc as required as per direction of Engineer Incharge (Make-Seimens/HPL/Anchor/L&T /Havels/C&S/R. K.) S/F of SP MCB 16 way double Door (2.3.8 )
118S/F of MCB 12 way Double door (2.3.7)
119Main switches Supply, Installation testing & commissioning of Main Switches (IS13940 part 3/1993) of following coopacity on existing surface/wall mounting & complete with H.R.C fuse links, inter connections earthing etc as required as per direction of Engineer Incharge (Make-Seimens/HPL/Anchor/L&T /Havels/C&S/R. K.) S/F of 63A ICDP main switch with MS box of 250mmx300mmx60mm deep ( (2.15A)+(1.24.16 )
120Earthing Earthing with G.I. Earth pipe 3 mtr Long 40mm dia ISI marked including accessories & providing masonary enclosure with cover plate having locking arrangement & watering pipe with charcoal & salt as required (3.2)
121Supply & laying 6 SWG G.I. wire in recess for loop earthing as required (3.17)
122Fittings Providing & fixing plain 16/0.2mm twin twisted flexible, FR PVC insulated copper cable in polythene sleeve or conduit of suitable size on the floor/wall or side of the table/door etc as required.(1.31)
123Supply and fixing of 225 mm Exhust fan with all accessories and connections (Make:Usha-Aero Clean Plus DBB/Crompton- Trans Air 12\\" reversiable /Havells-Venti Air DS (HS)/Anchor- Anmol delus R/Orient-Power Flow DBB// Pollycab -Fresh on DBB )
124S/F of Call bell/Buzzer(Ding dong type) ISI marked suitable for DC/AC single phase 230 volts complete as required. (1.30)
125S/F of 18-25Watt L.E.D Tube light fitting with all accessories and connections (Make:HPL/ Havells/PAC/Crompton/Polycab)
126Supply and fixing of 1200mm A.C. Ceiling fan (5 star) 28 watt BLDC with all accessories and connections with out fan regulator (Make:Usha-Techinix ISI /Crompton- Energion Groove/Havells-Efficiencia Neo/ Anchor- Eco Breeze Urban/Orient-Eco Tech Supreme/ Pollycab -Affeciente Neo )
127S/F step type modular fan regulator
128Supply & fixing of superior type Led bulk head fitting general domestic use ISI marked square / oval type including necessary connections. ( M-5 )
129Supply and fixing of 30-35 Watt Single LED Street Light Fitting with LED & Electronic driver with all accessories and connections ( Make- Crompton/Phillips/HPL/Polycab/Havells )
130S/F of 10w Watt LED Bulb
131S/F of 15w Watt LED Bulb
132S/F of 1650-1700 VA/12V Inverter with 1 no 180Ah battery including trolley arrangement (Make: V-Guard/ Microtake/ Luminous
133Earth work in excavation of foundation in all kinds of soil within 50m initial lead and 1.5m initial lift including rough dressing & breaking clods to maximum 5cm to 7cm and laying in layers not exceeding 0.3m in depth and as per direction of the Engineer-in-Charge.1st depth-
1342nd depth-ST-
135Supplying all materials,labour ,T&P and filling in foundation and plinth with sand well watered and rammed including cost, conveyance of all materials to work site ,payment of royalty,taxes etc. all complete as per direction of the Engineer-in -charge
136Supplying all materials, labour, T&P and providing cement concrete ( 1:3:6 ) with 4cm size crusher broken hard granite metal including watering, curing, cost of all materials,conveyance of all materials to work site with payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge.
137Supplying all materials, labour, T&P and providing cement concrete ( 1:1.5:3 ) with 12mm size crusher broken hard black granite chips including watering, curing,cost of all materials, conveyance of all materials to work site with payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge
138Supplying all materials labour T&P and providing brick work with Fly ASh Bricks having c. s. not less than 75Kg/cm2 with dimensional tolerance +-8% in cm (1:3)including watering, curing, conveyance of all materials to work site payment of royalty, taxes etc. all complete as per specification and dir of EIC. in F& P in cm (1:3)
139Supplying all materials labour T&P and providing 12 mm thick cement plaster in C.M. (1:3) on brick/stone work including watering, curing, conveyance of all materials to work site payment of royalty, taxes etc. all complete as per specification and direction of EIC. 12mm CP(1:3) with Punning
140Supplying all materials, labour, T&P and providing rigid and smooth centering and shuttering for R.C.C works including false work and dismantling them after casting including conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge
141Supplying all materials, labour, T&P and providing M.S reinforcement for R.C.C work including cutting, bending, binding, and tying the grills and placing in position including cost of binding wire 18 to 20 gauge, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge
142Supplying all materials, labour, T&P and providing cement concrete (1:1:5:3) with 12mm size hard broken granite chips for R.C.C works including hoisting, laying, watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge
143Supplying all materials,labour,T&P and providing CC(1:2:4)with 12mm size and HBG chips including watering, curing, conveyance of all materials to worksite payment of royalty, taxes etc. all complete as per specification and direction of E.I.C.
144Supplying all materials labour T&P and fixing Ceramic tiles in floors. Treads and landing on 25mm thick bed of cement mortar (1:1) joined with neat cement slurry mixed with pigments to match the3 shades of the tiles including rub bins and dir of EIC.
145Supplying all materials labour T&P and fixing porcelain glazed tiles/Marble tiles /Kota /Kodappa tiles in walls / dados skirting on 12mm thick cp (1:3) jointed with neat cement slurry mixed with pigments to match the shades of the tiles including rub bins and polishing complete as per direction of EIC.
146Supplying all materials labour T&P and providing cement flush pointing to brick masonry (1:3) including watering, curing, conveyance of all materials to work site payment of royalty, taxes etc. all complete as per specification and direction of EIC
147Supplying all materials labour T&P and providing precast RCC manhole cover with cc (1:12:3) of 12mm hg chips including conveyance of all materials to site after payment of royalty and taxes etc. all complete as per PH specification and direction of EIC-(size 550mmx550mmx76mm)
148Supplying all materials labour T&P and providing fitting and fixing SW Tee in wall including filling the necessary with cement concrete (1:2:4) with 12mm size hg chips all complete materials to as per specification and dir of EIC.100x100x100mm PVC Tee/Y
149Filling in foundation and plinth with excavated materials, moorum including watering and ramming as directed by the Engineer in charge
150Supplying all labour materials T&P fitting fixing of AL. door frame with OEL Anodized Al. Door section of 9202 as vertcal member,9201 as top member and 9200 as bottom and middle member and 12 mm thick pre-laminated board in bottom portion fixed on door frame by meams of tapered clip NO-4660 and the frame by means of jointing angle NO-185 including all cost of labour ,T&P ,hire charges of drilling machine ,labour etc all complete as per the dir of EICusing high quality pigments complete in all respect as per specification and direction of the E.I.C
151Supplying all materials labour T&P and cutting holes through brick/stone masonry works including making good the damages in cm (1:4) for taking H.C.I/PVC pipes and fittings etc. all complete as per PH specification and direction of EIC. 250mm to 375mm thick wall
152Roof cutting
153Supplying all materials, labour, T&P and fixing water closet, squatting pan (Indian type W.C pan/Orissa pattern squatting pan) duly embedded in cement concrete (1:4:8) using 4cm size hard granite metal including fixing a pair of vitreous china 250mm x 130mm x30mm footrest etc all complete as per specification and direction of the E.I.C.(580mmx440mmSize) (Neycer/ Parry ware/ Cerra/Hindware Make)
154Supplying all materials, labour T&P and fixing Wash Down Water Closet(Europeon type W.C. pan) with Integral S trap to the floor with wooden plug and C.P.screws including jointing the trap with soil pipe in C.M.(1:1) etc. all complete as per specification & direction of E.I.CE..W.C. with S trap plain(Neycer Parry ware Cerra Hindware Make)
155Supplying all materials, labour, T&P fitting and fixing Plastic Seat and cover for E.W.C. with chromium plated brass hinges and rubber buffers all complete as perr specification and direction of E.I.C. (Neycer/ Parry ware/ Cerra/Hindware Make)
156Supplying all materials labour T&P and fixing wash basins with hole for pillar taps with CI/MS brackets painted white including holes in walls and making good the damages etc .all compt. As per PH sp. And dir. Of EIC. 550x400mm WHB-(Neycer/ Parry ware/ Cerra/Hindware Make)
157500mmx400mm size WHB
158Pedestral 550x400mm WHB
159Supplying all materials labour T&P and fixing wash kitchen sink/laboratory sink with CI/MS brackets painted white including holes in walls and making good the damages etc. all complete as per PH sp and dir of EIC 610x510x200 mm Stainless Steel kitchen Sink heavy good quality
160600x450x250 mm Porcelain sink (Hindustan make)
161Supplying all materials,labour,T&P and fitting and fixing 10Ltrs capacity PVC low level flushing cistern with a pair of C.I/MS brackets complete with fittings such as syphonic arrangement,15mm nominal size Brass/PVC ball valve with polythene float,CP/Brass handle,unions and couplings for connection with inlet,outlet,overflow pipes,32mm dia PVC flush bend,15mm dia PVC connection pipes including cutting holes and making good the same and connecting the flush bend with cistern and closet and connecting inlet pipe with supply main with etc all complete as per specification and direction of the E.I.C. (Hindware/Parryware/Cera/Equivalent) (a) 10 lit PVC L/L Cistern
162Supplying all materials,labour,T&P and fixing mirror of superior glass mounted on 6mm thick A.C. sheet or plywood sheet and fixed to wooden plugs with CP screws and washers complete as per specification and direction of the E.I.C. 600mmx450mm size (fixed type)
163Supplying all materials labour T&P and fixing standard size cp soap holder compt. With cp brass brackets fixed to wooden plugs with cp screws as per PH specification and direction of EIC Stainless steel with heavy good quality
164Glass Self
165Supplying all materials labour T&P and fixing standard size cp towel rail/ring compt. with cp brass brackets fixed to wooden plugs with cp screws as per PH specification and direction of EIC.(a) 20mmx450mm long CP towel rail
166CP Towel ring
167Supplying all materials, labour T&P and fitting and fixing C.P shower with 15mm or 20 mm inlet with C.P shower arm including polishing all complete as per P.H. specification and direction of EIC 15mm dia cp shower
168Supplying all materials, labour T&P and construction of Inspection chamber of the following sizes with c.c.(1:3:6) using 40mm size hg metal on bed, FLY ASH Brick work in cm(1:6) moulding and shaping the channel inside and benching with c.c. (1:1.5:3) with punning to inside cement flush pointing (1:3) to outside RCC cover slab in cc (1:1.5:3) using 12mm size hg chips with RCC m. h. cover, e. w. in excavation in all kinds if soil and refilling the cavity around the chamber including watering, curing, conveyance of all materials to site payment of royalty taxes etc. all complete as per approved specification and direction of EIC.Size (760mmx760mmx460mm)
169Supplying all labour materials T&P and laying of UPVC soil waste pipe of the fo0llowing internal diameter confirming to IS in trenches of the depth upto 1.2mtr including jointing with supply of approved rubber, lubricant by non heat application method on bending with 150mm thick cc (1:3:6) using hg metal of 25mm to 40mm and then making all-round encasing including earth work excavation in all kinds of soil, refilling the trenches watering, curing, conveyance of all materials to site payment of royalty, taxes etc. & testing all complete as per PH sp and dir of EIC.110mm dia with allround encasing
170Supplying all materials labour T&P and construction soak way pit of the following sizes with dry brick walling from bottom upto invert of inlet pipe and FLY ASH Brick work in cm(1:6) for the remaining height at top 12mm thick cp (1:4) inside and outside over masonry brick work gravel packing the rear of well staining RCC cover slab in c.c. (1:1.5:3) using 12mm size hg chips fitted with iron lifting handles including e.w. in open well excavation in all kinds if soil and refilling the cavity around the pit and painting the iron works, watering, curing, conveyance of all materials to work site payment royalty, taxes etc. complete as per approved drawing specification and direction of EIC. 1.20m dia x 2.00m deep soak way pit
171Supplying all materials labour, T&P and constructing soak way pit of the following sizes with precast RCC rings joined loose gravel backing in the rear of well staining, precast RCC cover slab in c.c. (1:2:4) USING 2mm size hg chips fitted with iron lifting handles including e. w. in open well excavation in all kinds of soil and refilling the cavity around the pit and painting the iron works watering, curing, conveyance of all materials to work site payment of royalty, taxes etc. all complete as per approved drawing, specification and direction of EIC.(a) 0.90m dia x 1.80m deep RCC Ring Soak Pit
172Supplying all materials, labour, T&P and Fitting and Fixing of Rotational moulded polythene cylindrical vertical water storage tankconforming to 12701/1996 including cutting holes through the tank and fixing mild steel tubes and fittings and providing extra sockets and jamnuts, including hoisting upto a height of 5 mtr above G.L and placing the tank in required position including conveyance of all materials to work site, payment of royalty, taxes etc all complete as per P.H specification and direction of the E.I.C. (a) 2000 lits capacity on the roof of First floor
173Supplying all materials, labour, T&P and construction of masonry staging with providing 1st class K.B. Brick work in C.M.(1:6) of 0.46mtr height in staging, 12 mm cement plaster in C.M (1:6), R.C.C. Beam of 0.25mx0.30mx3.18m in C.C (1:1.5:3) using 12mm size H.G.Chips including centering, shuttering, bending and binding of rod etc watering, curring, conveyance of all materials to work site, payment of royalty, taxes etc all complete as per P.H specification and direction of the E.I.C. (a) 2000 lits capacity on the roof of First floor
174Supplying all materials labour T&P and fitting & fixing UPVC SWR soil waste ventilating pipes and fittings of the following OD conforming to ISI No.13591/1992 to walls with nails bobbins and wooden plugs or laying in trenches including jointing with supply of approved rubber lubricant by non-heat application method as per manufacturers specification testing e. w. in excavation in all kinds of soil and refilling of trenches as per direction of EIC 110mm dia UPVC SWR Pipe with rain water piping (.Ashirvad / Supreem / Oriplast / Hariplast) (a) 110mm dia PVC pipe
17575mm dia PVC pipe
176110mm dia PVC'P' trap
177110mm dia.PVC S/J/D
178110mm dia.PVC D/J/D
179110mm dia.PVC Door Bend
180110mm dia PVC Plain Bend
181110mm dia PVC offset
182110mm dia PVC Cowl
18375mm dia.PVC Door Bend
18475mm dia PVC Plain Bend
18575mm dia PVC Plain Tee
186125mm dia CP greatings
187Supplying all materials,labour,T&P and providing and fixing to wall or ceiling and floor pvc pipes confirming to ASTM-D-1785/89(sch-80) and pipe fittings of the nominal bore with clamps including making good the wall,ceiling and floor all complete as per specification and direction of E.I.C. (a) 20mm dia C-PVC PVC Pipe (Internal)
18825mm dia (ASTM )PVC Pipe
18915mm dia PVC inlet Connection Pipe
19032mm dia PVC Waste Pipe
191Supplying all materials,labour,T&P and cutting holes for taking G.I/PVC pipes and making good the damages as per the direction of E.I.C.
192Supplying all materials,labour,T&P and cutting holes in RCC,floors,roofs etc. upto 19cm thick for passing G.I/PVC pipes and fitting etc. and repairing the holes after insertion of pipes etc. with cc(1:2:4)including finishing complete so as to make it leak proof as per direction of E.I.C.
193Supplying all materials, labour, T&P and cutting grooves in pucca floors and walls for taking G.I./P.V.C. pipes and making good the damages as per direction of the E.I.C.
194Supplying all Materials labour T&P and fitting and fixing brass/CP Fittings of the following nominal bore with supply of all jointing materials etc. complete as per PH Specification and Direction of EIC.(Jaguar/Hindware) (a)15mm dia C.P Bib Cock(L.B)
19515mm dia C.P Sink cock .(Jaguar/Hindware)
19615mm dia C.P Bib cock (SB).(Jaguar/Hindware)
19715mm dia C.P Twin Bib cock.(Jaguar/Hindware)
19815mm dia C.P Health Fuccet.(Jaguar/Hindware)
19915mm dia C.P Pillar cock .(Jaguar/Hindware)
20015mm dia C.P Pillar cock Elbow Action. (Jaguar/Hindware)
20115mm dia C.P Sink cock Elbow Action. (Jaguar/Hindware)
20215mm dia Angle Stop Cock.(Jaguar/Hindware)
20315mm dia CP Wall Mixture (3-in-1).(Jaguar/Hindware)
20415mm dia CP Flange
20515mm dia CP Extension Piece
20625mm dia PVC Ball valve
207Sinking of 125mmx100mm dia Tube well by fast drilling Sofasticated Rig.Labour for drilling of perfactly vertical bore holes as specified dia.For a specified depth rock with down the hole hammer drilling rig combination drilling rig as required to soil,the soil condition as per direction of E.I.C including supply of rigs with all accessories,T&P consumable etc for lowering 125mm dia PVC pipes for casing fitted with sockets, washers and without well screen as per the necessity for the soft,medium and hard formation (PCV/G.I) casing pipes for the over borden is to be provided by the contractor including lowering and drawing after complete of tube well.Tube well(1No).(a)Drilling of 125mm dia. Bore-0.00mtr to 30.00mtr
208Drilling of 100mm dia. Bore-30.00mtr to 60.00mtr
209Lowering the following G.I/PVC pipe confirming to ASTM-D-1785/89(sch-80) with or without soltted pipes as per necessity from ground level upto 30.00mtr depth and fitted and fixed in perfecty vertical position including cutting and threading pipes and soltted pipes and supplying and fixing of all jointing material,T&P etc the top of the casing pipe threaded including piping tube well to prevent entry of foreign materials from above(PVC/G.I) supplied by the contractor (including cost of pipe) (a) Lowering of 125mm dia PVC pipes:00.00 mtr to30.00mtr
210Cost of 125mm dia PVC pipes:-00.00mtr to 30.60mtr
211Cleaning and developing the tube well using their own compressor continuously worked till clear and adequate discharge is obtained from the tube well including supply and use of all necessary equipment and labour as per the direction of Engineer-in-charge.
212Supplying of ISI mark 1.00 HP single phase vertical submersible pump set with discharge of 900-1000 ltr/hour and a head of 50-60 mtr of reputed make like KSB/Texmo & Equivalent including all cost, conveyance and taxes etc. all complete as per direction of E.I.C.
213Supplying all labour T&P and fitting and fixing of 1.00HP single phase verticaql submersible pump set with commissioning and testing etc. all complete as per direction of EIC.
214Supplying and fitting and fixing of ISI mark DOL starter of reputed make like BCH or equivalent for 1.00HP single phase submersible pump including all cost, conveayance and taxes etc. all complete as per direction of EIC.
215Supplying and fitting and fixing of three core flat cable (1.5mm2) of ISI make of reputed company like BCH/Finolex or equivalent and connecting the pump and starter including all cost, conveyance and taxes etc. all complete as per direction of EIC.
216Supplying and fitting and fixing jof plastic rope, MS well cover, MS clamp, stainless steel short piece, bend & socket including all cost, conveyance and taxes etc. all complete as per direction of EIC.
217Supplying and fitting and fixing of HDPE pipes and pipe fittings with making connection to pump set including all cost, conveyance and taxes etc.all complete as per direction of EIC.25mm dia HDPE Pipe(Internal Pipe) Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58545811
AUTHORITY Government Departments
TENDER VALUE 60.05 Lakhs
LAST DATE 23-11-2026
Authority
Authority Name Rural Works Department
Work Description Tender for Construction Of Day Care Sub Center Cum Health Wellness Center Building At Saraskana Under Saraskana Block Of State Plan 2025-26.
Basic Detail
Tender No 08Online)/RWD/BPD/2026-27
Bidding Type Tender
Location
City Mayurbhanj
State Odisha
Key Dates
Publish Date 16 Nov 2026
Submission Date 23 Nov 2026
Open Date 23 Nov 2026
Finance
Tender Value 60.05 Lakhs
Tender Fee 10000
EMD 60055
Exemption Available
Document List
75440cbd-1445-43e6-ac11-8ce97116a51e.html
BOQ_621224.xls
Tendernotice_1.pdf
Tendernotice_2.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 16, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Nov 23, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 1 day
Nov 23, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 1 day

Tender Documents

Download All (ZIP) ↓
html

75440cbd-1445-43e6-ac11-8ce97116a51e.html

xls

BOQ_621224.xls

pdf

Tendernotice_1.pdf

pdf

Tendernotice_2.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender