Tender For Day To Day Complaints And Welcome Maintenance And Certain B/R Repairs In Jyestha, Dhanistha, Foma House And Certain Other Locations Under Age B/R-Ii Of Ge (Nw) Nofra.
Tender Value
49.90 Lakhs
Estimated cost
Bid Submission
05 Dec 2026
13 days left
EMD
99800
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Mumbai → Maharashtra
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Day To Day Complaints And Welcome Maintenance And Certain B/R Repairs In Jyestha, Dhanistha, Foma House And Certain Other Locations Under Age B/R-Ii Of Ge (Nw) Nofra.
BOQ
| Sl. No. | Item Description |
| 1 | Note : i) The tenderer shall note that before quoting his unit rate, all items of works shall be executed in high rise building (16th floor building) & including provision of necessary scaffolding & safety measures.ii) One carpenter and one plumber should be deployed every day in complex to attend day to day complanits, if complaint not resolved in same day, penalty of Rs. 200 per day per complaint shall be recovered from contractor from his dues.iii) After painting, cleaning of all floors & furniture by the contractor on his own arrangement. |
| 2 | M&L complete removal of existing treatment, preparation of old plastered surfaces of wall and applying two coats of oil emlusion distemper over a coat alkali primer over 3mm thick white cement based wall care putty on the existing surface and including necessary scaffolding upto any height & including complete all as specified and as directed by Engineer-in-Charge. |
| 3 | All as item No 3 above but on ceiling complete. |
| 4 | Material & Labour for preparing old plastered / decorated surface of wall including cornices etc by brooming down and applying two coat of oil bound distemper with smooth roller finish ,complete all as specified and directed by Engineer in Charge. |
| 5 | All as item No 4 above but on ceiling complete. |
| 6 | Material & Labour for preparing old plastered / decorated surface of wall including cornices etc by brooming down and applying one coat of oil bound distemper with smooth roller finish ,complete all as specified and directed by Engineer in Charge. |
| 7 | All as item No 6 above but on ceiling complete. |
| 8 | Material & Labour for preparing old plastered / decorated surface of wall including cornices etc by brooming down and applying Two coats of Royale Luxury emulsion paint over 2 mm thick wall care putty wherever required with smooth roller finish, complete all as specified and directed by Engineer in Charge. |
| 9 | M&L for Preparation of old painted wood or wood based surfaces of any description exc 10 cm width or girth and applying two coat of approved wood polish to wooden surfaces including thoroughly surface preparation, sanding, filling of minor imperfections and application of suitable sealer/stain where required. |
| 10 | M&L Preparation of old painted wood or wood based surfaces of any description exc 10 cm width or girth and applying two coat of synthetic enamel paint with smooth roller finish etc complete all as specified and directed by Engeer- in charge. |
| 11 | M&L Preparation of old painted wood or wood based surfaces of any description exc 10 cm width or girth and applying one coat of synthetic enamel paint with smooth roller finish etc complete all as specified and directed by Engeer- in charge. |
| 12 | M&L Preparation of old painted on steel based surfaces of any description exc 10 cm width or girth and applying one coat of synthetic enamel paint with smooth roller finish etc complete all as specified and directed by Engeer- in charge. |
| 13 | Taking down chowkats or frames but n exc 1.5 sqm each but with shutters (without taking off shutters from the frame) |
| 14 | Taking down shutters of any description exc 1 sqm and n exc 2 sq.m each |
| 15 | S&F powder coated (colour of coating as directed) aluminium (minimum 50 micron thickness of coating) of various section as required/suitable for doors, window & partion/Ventilator (sliding /or openable type)etc including fixing and making the frames hinges to receive glass/wire gauge etc. Complete incl all fittings like jointing cleats, glazing clips, rubber neoprene packing. anodised aluminium snap beading screws etc. rubber beading, clips locking arrangement, handle, sealant etc all as specified and as directed. |
| 16 | S&F 35mm thick 2nd class HW rail & stile plain framed , panelled shutter ( two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS: 1003 ( Part I), kiln seasoned and chemically pressure treated |
| 17 | S&F 35mm thick 2nd class hardwood glazed and skeleton shutters open rebated and prepared to receive glass, gauze, etc. divided in to squares,with plain, chamfered or rounded , mitred and rebated sash bars,any numbers ; edges of framing plain, chamfered or rounded , fitted with cut and mitred beads for securing glass, etc., sizes of members of shutters as specified in SSR Part I, Section 8 clause 8.24 (b) ; supplied and fitted to chowkhats of Second class hard wood. |
| 18 | M&L for preparation of newly wooden surfaes of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer incl preparation of surfaces. |
| 19 | S&F aluminium alloy wire cloth 0.45 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with aluminium wire staples all as specified and directed. |
| 20 | S&F Factory made single extruded WPC (WoodPolymer Composite) solid door/ window/Ceosetory windows & other Frames/Chowkhat of size 45 x 85 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete all as specified and directed. |
| 21 | M&L for factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screwsand as per specification & drawing complete all as specified and directed. |
| 22 | S&F in repairs 18/19 mm thick prelaminated partical board interior grade prelaminated both side with decorative choice lamination & fixed with screws to timber frame work including 6 mm thick teak wood beading all around complete all as specified and directed. |
| 23 | S&F 300 mm long aluminium alloy, sliding door bolt with hasp & staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts fixed with stainless steel screws complete all as specified and directed. |
| 24 | S&F for aluminium anodized barrel tower bolts 200 mm of extruded section and fixed with stainless steel screws complete all as specified and directed. |
| 25 | S&F for aluminium anodized barrel tower bolts 150 mm of extruded section and fixed with stainless steel screws complete all as specified and directed. |
| 26 | S&F 150 mm size aluminium alloy handles, cast type anodised, ISI marked and fixed with stainless steel screws complete all as specified and directed. |
| 27 | S&F 100 mm size aluminium alloy handles, cast type anodised, ISI marked and fixed with stainless steel screws complete all as specified and directed. |
| 28 | S&F butt hinges 100 mm stainless steel hinges medium weight and fixed with stainless steel screws complete all as specified and directed.. |
| 29 | S&F 150 mm long floor door stopper of aluminium door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring with stainless steel screws complete all as specified and directed. |
| 30 | S&F 125 mm long hasp and staple safety type aluminium anodised with mild steel hinge pin including bolt to hinge plate and fixed with stainless steel screws complete all as specified and directed. |
| 31 | Hacking out old broken glass (any thickness, size, quality or description) from iron frames glazed with putty or wooden beads complete all as specified.( Work carried out upto 16th floor of building either from inside or from outside). |
| 32 | S & F sheet glass of 4.8 mm thick selected quality in square and n exceding 0.5 Sqm in each pane. |
| 33 | S&F 3mm thick sheet glass froasted or obscured one side and glazing with oil putty or wooden beads in square area n.exc 0.5 Sqm in each pane complete.(Work carried out upto 16th floor of building either from inside or from outside). |
| 34 | S&F in repairs aluminium alloy wire cloth 0.45 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with aluminium wire staples all as specified and directed. |
| 35 | Taking down shutters of any description not exc 1 Sqm each and refixing in the same opening after easing & adjusting all as specified |
| 36 | Taking down shutters of any description exc 1 Sqm and n.exc 2 Sqm each and refixing in the same opening after easing & adjusting all as specified |
| 37 | Resecuring or easing & adjusting without taking down shutters of any description exc 1 Sqm and not exc 2 Sqm each |
| 38 | S&F in repairs aluminium anodized barrel tower bolts 200 mm of extruded section and fixed. |
| 39 | S&F in repairs aluminium anodized barrel tower bolts 150 mm of extruded section and fixed. |
| 40 | S&F in repairs 150 mm long floor door stopper of aluminium door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring all as specified |
| 41 | S&F in repairs 150 mm size aluminium alloy handles, cast type anodised, ISI marked all as specified. |
| 42 | S&F in repairs for 7 levers Godrej Night Latch with 3 keys complete all as specified and directed. |
| 43 | S&F in repairs fancy type drapery rods, powder coated aluminium of 20-25mm size and including fixing brackets, Knobs rollers etc.all as specified. |
| 44 | Dismantling floor, hearth or wall tiling including cement mortar bedding ( but not backing), removing serviceable tiles from site. |
| 45 | M&L for Non skid coloured ceramic tiles 7 to 8 mm thick(square/Rectanglar) area of each tiles exc 0.06 Sqm but n exc 0.11 Sqm in floor including 15mm thick screed bed or bedding layer for laying floor finishes in CM 1:4 etc set and jointed in neat cement slurry and pointed in white or coloured cement to match. |
| 46 | M&L for coloured glazed ceramic tiles 450x300x7 / 350x250 x7 mm mm thick but as on vertical surfaces such as skirting/dado including 15 to 20mm thick backing coat in CM 1:4 etc set and jointed in neat cement slurry and pointed in white or coloured cement to match in patch work. |
| 47 | M&L for light shade coloured vitrified ceramic tiles 8-10 mm thick (square/rectangular) polished area of each tiles not exceeding 0.36 Sqm in floors etc set and jointed in neat cement slurry and pointing in white or coloured cement to match incl 15 mm thick screed bed in CM 1:6 complete all as specified and directed in patch work. |
| 48 | M&L for light shade coloured vitrified ceramic tiles 8-10 mm thick (square/rectangular) polished area of each tiles not exceeding 0.36 Sqm as in skirting etc set and jointed in neat cement slurry and pointee in white or coloured cement to match incl 10 mm thick rendering in CM 1:4 complete all as specified and directed in patch work. |
| 49 | Dismantling stone slabs and tiles of any description or thickness in floors laid bedded and pointed in any mortar, complete all as specified. |
| 50 | M&L 16 to 18 mm thick Granite (of any type) work (table rubbed and polished) as in steps, jambs, pillars, window- cills,cooking platforms, working table and like over and including 20 mm thick screed bed or bedding layer in cement mortar (1:4), including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite incl moulding and rounding all as directed. |
| 51 | M&L for machine cut cudappa stone slab 20-25 mm thick laid over screed base in cement and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as directed. |
| 52 | Taking down cement plaster, any description on brick or stone or cement concrete walls including raking out joints, hacking for key, scrubbing down with water, complete all as specified. |
| 53 | Rendering 15mm thick cement plaster in cement mortor 1:6 on brick or concrete surfaces, surfaces to be finished even and smooth without using extra cement, complete all as specified. (Plaster work carried out in patch work) |
| 54 | M&L plastering 10mm thick in CM 1:4 in ceiling finishing even and smooth without using extra cement.(Plaster work carried out in patch work). |
| 55 | Rendering 15mm thick on brick work or concrete surfaces in cement mortar 1:4 finished even and fair including mixing integral water proofing compound @ 3% by weight, complete all as specified. (Water proofing compound shall be measured and paid separately). |
| 56 | Supply only integral water proofing compound complete all as specified. |
| 57 | M&L for preparation of newly plastered surfaces of wall and applying two coats of oil bound distemper over a coat of 1 to 2 mm thick wall care putty all as specified and directed. |
| 58 | M&L for preparation of newly plastered surfaces of wall and applying two coats of exterior emulsion paint over a coat of primer on wall complete all as specified and directed.(Paint Work shall be carried out upto 16th floor of building either from inside or from outside). |
| 59 | M&L for preparation of newly plastered surfaces of ceiling and applying two coats of oil bound distemper on ceiling complete all as specified and directed. |
| 60 | S&F in repair of GI tubing medium grade with all fittings like Tee, bend, elbow etc for 15 mm bore fixed to walls or ceilings with saddles/spacer and clips.(Rates deemed to be inclusive of scaffolding upto 16th floor.) |
| 61 | S&F in repair of GI tubing medium grade with all fittings like Tee, bend, elbow etc for 20 mm bore fixed to walls or ceilings with saddles/spacer and clips.(Rates deemed to be inclusive of scaffolding upto 16th floor.) |
| 62 | Taking down & Refixing 15mm old steel tubing and connections in new or old position (Walls, ceiling, floors, etc.) complete all as specified. |
| 63 | Taking down & Refixing 20mm old steel tubing and connections in new or old position (Walls, ceiling, floors, etc.) complete all as specified. |
| 64 | S&F in repair 20mm bore of CPVC pipes having thermal stability for hot & cold water supply including all plain and brass threded fittings of required sizes including all fittings and fixed to wall /ceilings with suitable clamps, laid in floor or concealed of 20mm size. |
| 65 | Taking down eaves gutters and rainwater pipes of any dia (any size or pattern ) including all fittings, heads, shoes, bends, swan necks etc (Measured overall as fixed along the centre line over fittings and accessories) & ht. upto 16th floor of bldg. complete all as specified. |
| 66 | S&F 160 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls including fixing clips, bends, elbows, shoes etc & ht. upto 16th floor of bldg., complete all as specified. |
| 67 | S&F in repair of PVC (SWR) bends of 160 mm bore & ht. upto 16th floor of bldg. Complete all as specified. |
| 68 | M&L for repairing and cleaning of PRV including replacement of nut, bolt,washer , rubber gasket adjustable bolt etc and refixing the same PRV in same position of 25 or 32 mm dia size. |
| 69 | Dismantling of cast iron or reinforced concrete pipes upto 100 mm (internal dia of pipe) jointed in cement mortar and taking out of trenches if required. |
| 70 | S&F sand cast type 100 mm bore cast iron soil , waste and vent pipes in any length with or without ears, with cement joints but fixed to walls with MS clams & ht. upto 16th floor of bldg, complete all as specified.. |
| 71 | S&F sand cast type 75 mm bore cast iron soil , waste and vent pipes in any length with or without ears, with cement joints but fixed to walls with MS clams & ht. upto 16th floor of bldg, complete all as specified. |
| 72 | S&F in repairs 100 mm bore cast iron bends (any radius), diminishing pieces or tapers (larger bore measured) & ht. upto 16th floor of bldg., complete all as specified. |
| 73 | S&F in repairs 75 mm bore cast iron bends (any radius), diminishing pieces or tapers (larger bore measured) & ht. upto 16th floor of bldg., complete all as specified. |
| 74 | S&F in repair 75mm bore of pipe Branch pieces,double (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches with oval access doors, & ht. upto 16th floor of bldg., complete all as specified. |
| 75 | S&F in repair of 100mm bore of pipe Branch pieces,double (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches with oval access doors, & ht. upto 16th floor of bldg, complete all as specified. |
| 76 | S&F in repairs cast iron 'P' trap 100mm dia |
| 77 | S&F in repairs cast iron floor trap 75 mm, with grating including jointing to waste pipe fixed in cement concrete 1:2:4 all as specified and directed. |
| 78 | S&F in repair of 100 mm cast iron sanitary connections short connections pipe of length upto 300 mm length all as specified and directed. |
| 79 | S&F in repairs vitreous china wash down water closet pan white pedestal pattern including plastic sheet cover with nuts and bolts etc all as specified and directed. |
| 80 | S&F in repairs water closet squatting pan Orissa pattern 580x440mm, white with integral foot rests including connecting to trap and to flushing pipe antisyphonage pipe including making good to floor (excluding flushing cistern and flush pipe). |
| 81 | S&F in repairs vitreous china wash down water closet pan white Semi pedestal pattern ( Anglo Indian ) including plastic sheet cover with nuts and bolts etc all as specified and directed. |
| 82 | S&F in repair of vitreous china wash hand basin flat back of size 550x400mm including bracket, brass chromium plated waste coupling of 32 mm bore and pillar tap 15mm bore dia fancy type. |
| 83 | S&F in repair of 10 ltr capacity PVC syphonic action type flushing cistern low level white with inlet, ball valve, float and handle including connetion to pipe. |
| 84 | S&F in repairs PVC bathroom cabinet with 4mm thick looking mirror of overall size 450mm x 300mm of approved tint and pattern and drilling in and fixing with 02 Nos. chromium plated screws complete all as specified and as directed |
| 85 | S&F in repair of 450mm x 600 mm bevelled edge looking mirror of selected quality glass, mounted on 6 mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers. |
| 86 | S&F in repairs plate rack made of stainless steel 600 x 750X0.55mm including fixing as per manufacturers instruction. |
| 87 | S&F in repairs CP bib cock fancy type 15 mm bore complete all as specified and dir. |
| 88 | S&F in repairs fancy type CP Pillar taps 15 mm bore all as specified and directed . |
| 89 | S&F in repairs CP angular stop cock / angle valve 15 mm bore all as specified and directed. |
| 90 | S&F in repairs 20mm bore of dia Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed.( Work will be carried out at terrace). |
| 91 | S&F in repairs fancy CP wall mixer (Hot and cold) 15 mm bore complete all as specified and directed |
| 92 | Supply and fix in repair Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified |
| 93 | S&F Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed. |
| 94 | S&F in repairs Plastic water closet seat, black or white closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device.all as directed. |
| 95 | S&F in repairs flush pipe of PVC 32 mm dia for low level cistern. |
| 96 | S&F in repair stainless steel grating cover 100mm dia fixed in repairs complete |
| 97 | S&F in repairs PVC connections 15 mm size with PTMT nuts of length 600mm |
| 98 | S&F in repairs 32/38 mm dia WHB/urinal /Sink flexible waste pipe all as specified and directed. |
| 99 | S&F in repairs aluminium anodised tubular towel rail 20mm dia D type 60 cm long between flanges. |
| 100 | Cleaning of loft tank of upto 300 ltrs capacity (in existing position or disconnecting existing tanks for cleaing and refix in same position incl fixing of all attached fittings) by removing out the residual water from the tank, removing dirt, cleaning the internal surfaces of the tank with high pressure controlled water jet pump by using different nozzles as per requirement. After sucking out entire moss and algae by wet vaccume pump, wash the tank with clean drinking water tank cleaning solution on all internal surfaces, then cleaning the bottom surface of the tank with vaccume pump to make it dry and providing sticker showing the date of cleaning ,complete all as specified and directed. |
| 101 | Dismantling water tank of capacity exc. 250 Ltrs but n.exc. 500 ltrs. |
| 102 | S&F rotational moulded polythylene water storage loft tank of 300 ltr capacity hoisted including 20 mm bore ball valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed (minimum weight 210 grms ) all as specified in SSR Part I. |
| 103 | S&F PVC modular section 20mm thick as in profile including 'C' channels, aluminium all around the profile all as specified. |
| 104 | S&F in repairs 20 mm bore ball valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed (minimum weight 210 grms) all as specified and directed. |
| 105 | Dismantling wrought iron or mild steel work of any description not otherwise provided for. |
| 106 | Mild steel framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted or forged into spikes, framed guard bar, barred iron doors, ladder, framed balusters, railing, frame work for water tanks and similar work conforming to Fe 290 Gd E-165 all as specified . |
| 107 | M&L for preparation of newly steel surfaces of any description over 10 cm in width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide, complete all as specified and directed. |
| 108 | M&L for cleaning of PCC paver block, chequred tiles and any type of PCC flooring by water spray and apply one coat of floor paint suitable for floor by using brush/ roller, complete all as specified. |
| 109 | Material and labour for attending online complaints of joinery such as wooden/steel/aluminium of any description including pelmet box, cupboard ,drawers, and the like door springs, rolling shutters etc requiring carpentry work like adjusting easing, wrought, cutting, pinning, wedging and finally making good etc and functioning to seating over with each other with tightening of screws/nails , door, springs etc and fixing of tower bolt, sliding door bolt, plate rack, handles of any size incl rawl plug & screws,and including petty repairs material like screws/mails, plug, grease etc to make it functional as in day to day maintenance work, complete all as specified. |
| 110 | Material and labour for attending online complaints of plumbing and sanitary fittings including water leakage from taps, EWC”s, flushing cistern, urinals, wash basins, bottle traps etc and any obstruction to water supply in rooms/Qtrs, requiring plumber work with minor stores such as replacement of Brass spindle, M seal, Screws ,nailing , washers, check nuts, tightening of fittings of flushing cistern, cleaning of bottle traps etc to make it functional and stop leaking of any type of plumbing and sanitary items as in day to day maintenance work and fixing of new sanitary fittings (as bib taps, pillar taps, stop cockes, Seat cover, jet spray, cistern, mirror cabinet etc), complete all as specified. |
| 111 | Attending the complaints of air lock of GI pipes during supply hours (In early morning @ 6.00AM) & by taking down GI pipes and /or by using pressure pump in pipe where air lock occurred & resolve the complaint . After refix the GI pipe in the same location, complete all as specified. ( for internal or external airlock in any diameter of pipe) . |
| 112 | Dismantling Single layer Mangalore pattern or similar tiles in roofing, complete all as specified. |
| 113 | M&L for roof tiles, Mangalore pattern, interlocking at side joints laid dry complete all as specified. |
| 114 | M&L Ridge or hip tiles to suit Mangalore pattern of roofing tiles, bedded and jointed in cement mortar 1:6 complete all as specified. |
| 115 | M&L for preparation of old surface of wooden of any description including cleaning and applying one or more coat french polish till achiving desired finish all as specified and directed by Engineer- in charge. |
| 116 | Dismantling of Asbestos cement (corrugated, semi corrugated, etc) sheets in roof covering complete all as specified and directed. |
| 117 | S&F for Pre-painted Galvalume Aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws all as specified. |
| 118 | S & F in repair for Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws including taking down old sheet of any description/ size complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 16, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedDec 05, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 13 daysDec 07, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 15 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender