Public Administrative Department Local Bodies Closing in 6 days TDR #58544653

Tender For The Installation Of Decorative Lighting, Along With Its Operation And Annual Maintenance For A Period Of 3 Years, In The Area Extending From Kukrail Bridge To Iim Road And The Vicinity Of Rashtra Prerna Sthal.

Issued by Local Bodies · Lucknow, Uttar Pradesh
Tender Value
2.86 Crore
Estimated cost
Bid Submission
25 Nov 2026
6 days left
EMD
8.60 Lakhs
Bank guarantee accepted
Document Fee
8000
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Lucknow → Uttar Pradesh
EMD Exemption
Not Available
Quantity
Not Available

Project Description

Tender For The Installation Of Decorative Lighting, Along With Its Operation And Annual Maintenance For A Period Of 3 Years, In The Area Extending From Kukrail Bridge To Iim Road And The Vicinity Of Rashtra Prerna Sthal.

BOQ

Name of Work:- Kukrail Brij se IIM Road tak avam Rashtra Prerna Sthal ke Sameepvarti Chetra mein Decorative Light Fitting ke Sthapna avam 03 Varsho ke Varshik Anurakshan va Sanchalan ka Karya.
Sl. No. Item Description
1Supply Installation ,testing & commissioning of Decorative lighting fixtures made out of Aluminium Wire frame supporting a mix of diode based LED/Neon Pixel light housed in diecast aluminium Casing conforming to protection grade , IP68 with all weather proof sealed driver box and LED strip UV resistand Grade 4 and fire proof Grade v-0 having voltage of 12v (low voltage) power rating of 7.2 watt/m capable of delivering RGB colours using SPI control method capable of working in the ambient temrature range of -20degree to + 55 degrees outdoor wire driver (Size .75MX1.20M) Both side Illumination/Glow complete in all resopect as per the satisfaction of E/Ic.( The drawing design shall be as per the approval of competant authourity).(butterfly/Dia/Kalash)
2Supply Installation ,testing & commissioning of Decorative lighting fixtures (made out of Aluminium Wire frame supporting a mix of diode based LED/Neon Pixel light housed in diecast aluminium Casing conforming to protection grade , IP68 with all weather proof sealed driver box and LED strip UV resistand Grade 4 and fire proof Grade v-0 having voltage of 12v (low voltage) power rating of 7.2 watt/m capable of delivering RGB colours using SPI control method capable of working in the ambient temrature range of -20degree to + 55 degrees outdoor wire driver (Size .60MX1.00M) Both side Illumination/Glow complete in all resopect as per the satisfaction of E/Ic. ( The drawing design shall be as per the approval of competant authourity). (Nameste)
3Supply and fixing of 2.5 Sqmm 3 core copper unarmoured cable
4Supply and laying of aluminium conductor PVC insulated armoured served sheathed cables 1100 Volts grade at a depth of 750 mm below ground level over a cushion of 75 mm. thick sand all around and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by the Engineer-Incharge, complete in all respect. The armouring of the cable shall be properly connected with the earth conductor by clamps etc., 25 sq. mm 3-1/2 core
5Supply and fixing following capacity of automatic street light cubicle control panel painted with anti corrosive alkali and acid proof paint consisting of time switch TSO 100 series with contactors, HRC fuses, isolating switch metering instrument & instrument box with CTs etc. in case of TPN, complete in all respect., 40 A TPN
6G.I OCTAGONAL POLE Supply & fixing of 10 mtr GI Octagonal Pole of approved make (top dia 100 mm, Bottom dia 200 mm and base plate 16mm thick) having 3 mm thikness with Double arm bracket 1 Mtr length in 1:2:4 RCC foundation bolt including the cost of fo
7STREET LIGHT LUMINAIRES Supply and fixing of LED Street light Fitting having die cast aluminium body and diffuser with driver set suitable for 140 to 150 Watt. Confirming to IP 66 Protection complete in all respects, CAT- AAA
8Rewireable Type Switches (T.P. and T.P.N.), S&F of 63 Amp. 415 V metal clad T.P.N. rewireable type switch fuse unit on angle iron bracket complete in all respect., Cat. B
9Supply & erection of overhead line with G.I. wire no. 8 to 4 SWG on poles/serivce bracket including binding etc. complete in all respect.
10Wiring of Submains with Aluminium cable using existing steel conduit, S/W of submain with two Nos. of 2.5 Sq.mm FRLSH PVC insulated 1100 V grade single core multistrand copper conductor cable in existing conduit complete with supply of all material Labour and T&P required for proper completion of the work as directed at site by Engineer In Charge.
11Supply and laying of aluminium conductor PVC insulated armoured served sheathed cables 1100 Volts grade at a depth of 750 mm below ground level over a cushion of 75 mm. thick sand all around and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by the Engineer-Incharge, complete in all respect. The armouring of the cable shall be properly connected with the earth conductor by clamps etc., 16 sq. mm 4 core
12Supply and laying of aluminium conductor PVC insulated armoured served sheathed cables 1100 Volts grade at a depth of 750 mm below ground level over a cushion of 75 mm. thick sand all around and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by the Engineer-Incharge, complete in all respect. The armouring of the cable shall be properly connected with the earth conductor by clamps etc., 70 sq. mm 3-1/2 core
13Supply and fixing of plain or pin type copper tin plated cable socket ( lug ) to the cable leads, insulating with tape and making connection etc. complete in all respect as per direction of the Engineer-Incharge., 16 sq. mm
14Supply and fixing of plain or pin type copper tin plated cable socket ( lug ) to the cable leads, insulating with tape and making connection etc. complete in all respect as per direction of the Engineer-Incharge., 25 sq. mm
15Supply and fixing of plain or pin type copper tin plated cable socket ( lug ) to the cable leads, insulating with tape and making connection etc. complete in all respect as per direction of the Engineer-Incharge., 50 sq. mm
16S/B of earth rod 20 mm dia 2.5 mt long including GI wire 7/16 SWG to connected earth rod and earth clamp on pole,3 mt long steel conduit to carry earth wire along the pole complite as per approved of E/Ic.
17S&F of 6 Amp to 32 Amp. SPMCB (10 KA) C Curve, CAT A
18HIGH MAST SHAFT Supply & fixing of 16 mtr High mast shaft of approved make with rising system hot dip glavanized inside & out side dip,heaving pole sheet thickness 3 mm. Top dia minium 150 mm, Bottom dia 360 mm base plate 32 mm thick suitable for wind ve
19FLOOD LIGHT LUMINAIRES Supply and fixing of factory wired integral LED flood light luminaires with die cast aluminium housing built with dirver set suitable for 170 to 200 Watt. Confirming to IP 66 protection complete in all respect., CAT- AAA
20Cubical Panel Board ( MCCB Type) Supply & Erracetion of factory fabricated & wired metal clad dust and vermin proof floor mounting, M.S. Channel Base with bottom and top cable entreis Electrical control panel with TPN MCCB's (Four Pole 36 KA with thermal magnatic release)Switches Complete and instrument chamber etc.complete in all respects. The instrument chamber shall be separate and shall comprise of flush type digital metering system for phase to phase voltage and single phase voltage, current and other parameters(KVA,P.F,KW etc) in each phase with touch type selector switches for different readings, instrument fuses, current transformer etc. The panel board shall have suitable capacity electrolytic alumininum busbars as per IS8623 or above istulated with heat shrink sleeving and mounted on non hygroscopic supports such as CMC/BMC support with deteachable side covers and shall be suitable for extension on the sides. The MCCB's shall be complete with suitable cable end boxes, compression glands and indicating lamp on incoming etc. The Job includes the grounting of the board as per directions of Engineer-in charge. All out goings of 100 Amp and above shall have an Ammeter. The panel board shall be fabricated with CRCA sheet with a minimum thickness of 1.6mm/2mm. Cubicle type switch board shall be of cat A & B Only. (Incoming - 200 Amp MCCB -1 No), Outgoing -100 Amp. MCCB-2 Nos., Cat. B. Pannel Cubicle Type
21ENCAPSULATED PIPE - IN- PIPE EARTHING Supply and burring of Safe Earthing Electrode T-19 (Hot Dip Galvanized), Length up to 2000mm, outer pipe 50mm, inner pipe 25, terminal Dia 12 mm, outer GI pipe of 16 swg and inner GI pipe of 12 swg with Hot Dip Galvanization up to 100 micron filled with crystalline conductive mixture (CCM) having anti corrosive & conductive property with 50 kgs activated soil (BFC) capable of reducing the soil resistivity with good mixture of retaining capacity along with 30cm square C.I. frame with hinged cover & masonry husing (from electrode terminal to switch board, cost of 25 x 3 G.I . strip will be extra) Make: As approved in U.P. P.W.D., & C.P.R.I. Certified.
22Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc.direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc., complete as required. 63 mm dia (OD-63 mm & ID-51 mm nominal)
23Supply and Fixing of 100 KVA, 300 – 470 / 400 Volts, 3 Phase, Unbalanced Type, Oil Immersed, Indoor / Outdoor Digital Micro Controlled Servo Stabilizer with Built-In Isolation Transformer including First Filling of Fresh Oil and Standard Fittings & Accessories. Note: 1) High Cut Off, Low Cut Off & Over-Load Protections are Included. 2) Single Phasing and Phase Reversal Cut Off is Included. As per Direction of E/Ic. (PSR)
24SF of double pole structure with 2 nos ST pole for SS 410 SP-54 11 Mtr long in 136 CC foundation 1/6 of pole length below GI and 30cm above G.1 20cm thick around the pole with 2 nos channel 125mmx75 mm one No Chennel cross arm of 75mmX 40mm 2 No 50X50X6mm single iron bracings with necessary nut bolts & packing pieces complete with painting as per direction of El PSR Bond No 87/CE/EE(E/M) 2021, Dated 09-11-2021.
25Supplying and erection of 11 KV pin insulator complete with large steel head G.I. pin, nuts, washers etc. as required
26Supplying and erection of 11 KV disc insulator for 11 KV over head lines with galvanised insulator fittings, ball and socket type and complete with galvanised strain clamps, bolts, nuts, washers etc. as required.
27Erection of ACSR conductor of 7/3.35 mm to 7/4.00 diameter and above including binding etc. as required.
28Supplying and erection of channel iron 75 mm X 40 mm X 6 mm (7.14 kg per metre) V shape cross arm for two 11 KV over head line conductors complete with 50 mm X 6mm M.S. flat iron clamps, bolts and nuts including drilling holes for insulator pins, bolts, nuts and washers etc (as per drawing) and painting with primer and finish paint as required.
29Supplying and erection of three piece nonlinear resistor type lightning arrestor suitable for 3 wire, 11 KV overhead lines with rated voltage 9 KV (rms) with a nominal discharge current rating of 5 KA and complete with galvanised clamping arrangement, G.I. bolts, nuts, washers etc. as required.
30S\E of 11 KV TPMO switches on poles including handle rod etc. complete in all respects as approved by E\I.
31S\E of 11 KV D.O. fuse set on poles complete in all respects as per approval of E\I.
32High Tension 11 KV Grade XLPE, Supply and laying of 3 core standered aluminium conductor XLPE (Cross linked polyethylene) insulated PVC bedded, Galvanised flat steel strip armoured cables confirming to I.S. 7098 (Part-II with latest amendments) II KV grade at a depth of 900 mm below ground level over a cushion of 100 mm thick fine river sand all around and protected with well burnt bricks on sides and on top put across. The armouring of cable shall be properly connected with earth conductor by clamps etc., 70 sq. mm 3 core
33ENCAPSULATED PIPE - IN- PIPE EARTHING Supply and burring of Safe Earthing Electrode T-19 Zn-Zinc Coated, Length 3000mm, outer pipe 48.4mm x 3.2mm, inner pipe 26.9mm x 2.6, terminal Dia 12 mm, coating 80-100 micron filled with crystalline conductive mixture (CCM) having anti corrosive & conductive property with 50 kgs activated soil (BFC) capable of reducing the soil resistivity with good mixture of retaining capacity along with 30 cm square C.I. frame with hinged cover & masonary housing. (From electrode terminal to switch board, cost of 25 x 3 G.I. Strip will be extra) Make: As approved in U.P. P.W.D., & C.P.R.I. Certified.
34Supply and laying of 25mm x 3mm G.I. strip from earth electrode directly in the ground as required complete in all respect.
35Supply and fixing of 2 metres high cage fabricated with 3mm thick expanded metal fixed on 50mm x 50mm x 6mm angle iron frame having vertical members spaced at 1 to 1.25 mts and horizontal members spaced at 1 mt. The vertical members shall be grouted in fl
36\\"S/E of 2.24 mtr. Long cross arm 50mmx 50mm. channel on pole including clamps, eye bolts etc. with red enamel paint as per direction of E/Ich. (Analysed as per SOR- 2020 civil) \\"
37Supply/ Laying of following size G.l. \\"\\"B\\"\\" class pipe at a depth of 750mm below ground level as cable carrier as direction of E/Inch. (PSR Bond No.02/CE/EE(E/M)/2022, Dated 14.09.2022) (a) 80 mm dia
38Supply and fixing danger board fabricated from 10 gauge M.S. Sheet as per I.E. Rules.
39Supply and fixing of Designing bracket Actual cast of decorative double arm bracket proper completion size (1200 x 1200 x 1500 ) mm MS pipe with hot dip two coat painting and decorative S.S. ball complete all respect with nut bolts. Rate are also dedect for single arms bracket @ 2100.00 per bracket .
40Supply and laying of aluminium conductor PVC insulated armoured served sheathed cables 1100 Volts grade at a depth of 750 mm below ground level over a cushion of 75 mm. thick sand all around and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by the Engineer-Incharge, complete in all respect. The armouring of the cable shall be properly connected with the earth conductor by clamps etc., 6 sq. mm 3 core
41Supplying and making outdoor cable end termination with heat shrinkable jointing kit complete with all accessories including lugs suitable for following size of 3 core, XLPE aluminium conductor cable of 11 KV grade as required : 70 sq. mm
42Supplying, installation, testing and commissioning of following capacity (continuous loading) BEE 5 Star, 100KVA
43Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level :, 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources)
44Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in:, Cement mortar 1:4 (1 cement : 4 coarse sand)
45Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc.direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc., complete as required., 90 mm dia (OD-90 mm & ID-76 mm nominal)
46Operation of Part A 1st year @ 2.5% of Total Estimated Cost
47Operation and Maintenance of Part A 2nd year @ 5.0% of Total Estimated Cost 16303168.00
48Operation and Maintenance of Part A 3rd year @ 7.5% of Total Estimated Cost 16303168.00
49Annual Operation and maintenance of LED street light fitting etc complete (Excluding LED Module, Driver) etc all complete (150+16Nos = 166 Nos x 36 month =5976 month) Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58544653
AUTHORITY Local Bodies
TENDER VALUE 2.86 Crore
LAST DATE 25-11-2026
Authority
Authority Name Lucknow Development Authority
Work Description Tender For The Installation Of Decorative Lighting, Along With Its Operation And Annual Maintenance For A Period Of 3 Years, In The Area Extending From Kukrail Bridge To Iim Road And The Vicinity Of Rashtra Prerna Sthal.
Basic Detail
Tender No 130/E-Tender/CE/2026-27 (04)
Bidding Type Tender
Location
City Lucknow
State Uttar Pradesh
Key Dates
Publish Date 14 Nov 2026
Submission Date 25 Nov 2026
Open Date 26 Nov 2026
Finance
Tender Value 2.86 Crore
Tender Fee 8000
EMD 8.60 Lakhs
Exemption Not Available
Document List
354ade52-0d11-4d3a-950a-87dcce199135.html
BOQ_2293693.xls
SBD.pdf
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 14, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Nov 25, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 6 days
Nov 26, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 7 days

Tender Documents

Download All (ZIP) ↓
html

354ade52-0d11-4d3a-950a-87dcce199135.html

xls

BOQ_2293693.xls

pdf

SBD.pdf

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender