Tender For Supply, Fabrication And Erection & Painting Of 02 No. Right Of Scouring Sluice Gates & 02 No. Left Scouring Sluice Gates Of Andhariguma Nalla Cd At Village S.Karadashing Of Rayagada Block Under Mid,Gajapati,Paralakhemunndi For The Year 2024-25.
Tender Overview
Project Description
Tender For Supply, Fabrication And Erection & Painting Of 02 No. Right Of Scouring Sluice Gates & 02 No. Left Scouring Sluice Gates Of Andhariguma Nalla Cd At Village S.Karadashing Of Rayagada Block Under Mid,Gajapati,Paralakhemunndi For The Year 2024-25.
BOQ
| Sl. No. | Item Description |
| 1 | Supply and fabrication of structural steel materials of different sizes (IS:2062), stainless steel flats of different sizes (04 Cr 19 Ni of IS:1570) for embedded parts, vertical lift sliding gate leaf, steel hoist bridge for single stem nut type screw gear box hoist of total weight about 2707.52KG approx for 4Nos. of sluice gate (Size-1500mm x 1150mm,1600mm x 1150mm,1500mm x 1150mm,1600mm x 1150mm) as per specification and instruction by Engineer-in-charge including cess,Overhead charges and contractor profit. |
| 2 | Supply of following bought out materials for 04 Nos. of Sluice gate Bolts, screw, nuts, washers etc- 163Kg, Bronze pad -16nos,Bottom Rubber Seal(10mm thick)- 7.0Mtr., Φ32 Side Seal(P-Type)- 10 Mtr.,Φ32 Top Seal(P-Type)- 5.2Mtr. Lifting Pin- 4Nos., Nut type screw gearbox assembly suitabely square threded for 63mm dia screw rod all inclusive of cost of material,cost of thrust bearing,machining and assembly charges -04Set, Operating handle-04Nos., Gate stem cum screw rod with thread length-6.4mtr., plain rod Φ63 with length -4.6mtr, Grease & gear oil etc - 20Kg.,Anchor bar-64nos,Stainless steel flat - 134.20Kg all as per specification & instruction of Engineer-in-charge including cess,Overhead charges and contractor profit. |
| 3 | Cost of Erection, positioning, aligning, fixing, trial and commissioning including unloading and shifting up to location of all components of 1st stage and 2nd stage Embedded parts, Vertical Gate leaf, Steel hoist bridge assembly with all accessories including machinery, fixtures, labour, cutting, aligning, welding, cleaning, handling and rehandling all complete as per specification and drawings with all lead and lifts required at the erection site including cess,Overhead charges and contractor profit. |
| 4 | Painting of all structural components including cleaning, degreasing, handling, cost of paint, applying of one coat primer of 40 micron thick and three coats of final paint of 100 micron each, all inclusive of labour, materials and consumables as per relevand IS code specifications and drawing with all lead & lifts including cess,Overhead charges and contractor profit. |
| 5 | Concrete cutting 3.40cum, 2nd stage concreteing 2.40/cum, all including cess,Overhead charges and contractor profit. |
| 6 | Hire charge for vehicle for transportation of structural steel,generator,welding transformer,derrick & other T&P from workshop to worksite around 300km including loading & unloading charges. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Tender Published
Tender notice published.
CompletedBid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 8 daysBid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 9 daysTender Documents
Download All (ZIP) ↓We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender