Tender For Construction Of Community Toilet At Jagannathpur Behera Sahi, G.P.- Bhusandapur, Dist - Khordha
Tender Value
25.20 Lakhs
Estimated cost
Bid Submission
30 Nov 2026
8 days left
EMD
25500
Bank guarantee accepted
Document Fee
7080
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Khordha → Odisha
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of Community Toilet At Jagannathpur Behera Sahi, G.P.- Bhusandapur, Dist - Khordha
BOQ
| Sl. No. | Item Description |
| 1 | Single under reamed Pile foundation with RCC M30 using 12mm size black hard granite crusher broken chips including cost of borring and including cost of conveyance, royalty and taxes of all materials, labour, T & P but excluding cost of M.S/Tor steel and labour charges for cutting, bending and binding of steel.Pile bore (dia=300 mm and length up to 6m) |
| 2 | Single under reamed Pile foundation with RCC M30 using 12mm size black hard granite crusher broken chips including cost of borring and including cost of conveyance, royalty and taxes of all materials, labour, T & P but excluding cost of M.S/Tor steel and labour charges for cutting, bending and binding of steel.For each additional depth of 0.5m beyond initial depth of 6.0m add extra to the ratePile bore (dia=300 mm and length 6m to 12m) |
| 3 | Cutting and dressing pile heads to required line and level and /or as directed and stacking the debris at convenient place and transport the same to any low lying area outside the working area and all associated cleaning of projecting reinforcements including all labour, labour cess, materials, tools, equipments etc., complete in all respect as per direction of the Engineer’-in-charge. |
| 4 | Earthwork in excavation in foundation in hard soil with initial lead and lift including rough dressing and levelling the bed and depositing the excavated earth at places away from work site including cost, conveyance, royalty and taxes of all materials, labour, T & P and dewatering if required for the work etc. complete and as per specification and direction of the Engineer -in-charge. |
| 5 | Supplying, filling in foundation & plinth with sand in layers not exceeding 23 cum (9\\") thick including watering & ramming with the cost,conveyance,royalty,taxes of all materials,labour,T&P required for the work etc. complete as per specification & direction of the Engineer-in-charge. |
| 6 | P.C.C of (1:3:6 ) with 4 cm down H.G.C.B metal includig hoisting, laying, compacting, curing and wateringetc. with all t&P required for the work including cost con veyance royality and all other taxes of materials compeltein all respect as per Engineer in charge. |
| 7 | 2.5 cm. Damp proof course with C.C. (1:2:4) using 12mm. Size hard broken granite Chips includig hoisting, laying, compacting, curing and wateringetc. with all t&P required for the work including cost con veyance royality and all other taxes of materials compeltein all respect as per Engineer in charge. |
| 8 | R.C.C. M-30 for footing with 20 mm. down graded black hand granite crushed broken stone chips including shuttering, staging, cost of conveyance of all materials with all taxes, royalty, labour and T&P required for the work etc. complete as directed by the Engineer-in-Charge. |
| 9 | R.C.C. M-30 for Plinth Beam with 20 mm. down graded black hand granite crushed broken stone chips including shuttering, staging, cost of conveyance of all materials with all taxes, royalty, labour and T&P required for the work etc. complete as directed by the Engineer-in-Charge. |
| 10 | R.C.C. M-30 for Column with 20 mm. down graded black hand granite crushed broken stone chips including shuttering, staging, cost of conveyance of all materials with all taxes, royalty, labour and T&P required for the work etc. complete as directed by the Engineer-in-Charge. |
| 11 | R.C.C. M-30 for Lintel Beam with 20 mm. down graded black hand granite crushed broken stone chips including shuttering, staging, cost of conveyance of all materials with all taxes, royalty, labour and T&P required for the work etc. complete as directed by the Engineer-in-Charge. |
| 12 | R.C.C. M-30 for Roof Beam with 20 mm. down graded black hand granite crushed broken stone chips including shuttering, staging, cost of conveyance of all materials with all taxes, royalty, labour and T&P required for the work etc. complete as directed by the Engineer-in-Charge. |
| 13 | R.C.C. M-30 for Slab with 20 mm. down graded black hand granite crushed broken stone chips including shuttering, staging, cost of conveyance of all materials with all taxes, royalty, labour and T&P required for the work etc. complete as directed by the Engineer-in-Charge. |
| 14 | Providing and laying 2.5 cm thick grading concrete (1:2:2) on roof slab with 6mm size hard granite chips on new works using 6mm size crusher broken black hard granite chips from approved quarry, scraping and cleaning the surface, fininishing smooth to proper slope and gradient including cost of all materials, cost of labour, conveyance, taxes, loading, unloading, curing,T&P, etc. all complete as per the direction of the engineer-in-charge. |
| 15 | Supplying, fabricating and placing of HYSD (FE-415) /(FE-500) grade steel for foundation, Sub/Super structure including cutting , bending, binding & welding and laying in position with cost, conveyance, taxes of HYSD steel and binding wires 18 to 20 gauge with all labour,labour cess, T&P, cage lowering, equipments etc., complete in all respect as directed by the Engineer in charge.(Brand of Steel - SAIL/LRNL/TATA/SHYAM ) |
| 16 | Brick works with fly ash bricks 25 cm x 12 cm x 8 cm size having crushing strength not less than75 Kg/ cm2 with dimensional tolerance + or - 2% in cement mortar (1:3) including cost conveyance,royality and all other taxes of materials etc. with curing complete in all respect as per specification and directon of Engineer in Charge. |
| 17 | 12 mm thick cement plaster in cement mortor (1:3) over brick masonary including cost and conveyance of all materials with all the taxes, royality, labour, T & P required for the work etc. complete as directed by the Engineer-in-charge. |
| 18 | 6 mm thick cement plaster (1:4) to RCC surfaces finished smooth including closed deep chiping and slury treatment including cost and conveyance of all materials with all the taxes, royality, labour, T & P required for the work etc. complete as directed by the Engineer-in-charge. |
| 19 | Supplying all materials, labour, T&P and providing cement punning including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge |
| 20 | Priming one coat with approved Water bound cement primer including cost of Primer.( on wall) including cost of all materials and labour etc complete in all respect as per direction of Engineer in charge. |
| 21 | Finishing walls with Weather coat (ISI) of approved shade in new work two coats to give an even shade including cost of all materials and labour etc complete in all respect as per direction of Engineer in charge. |
| 22 | Painting 2 coats to walls with Plastic emulsion paint of approved shade on new work to give an even shade including cost of all materials and labour etc complete in all respect as per direction of Engineer in charge. |
| 23 | Supplying, fitting & fixing Vitrified Tile 600mmx600mm Coloured / Printed series (Homogeneous) in floors, treads or steps and landing on 25mm thick bed of cement mortar (1:1) (1 cement, 1 sand) jointed with neat cement slurry mixed with pigment to match the shade of the tiles including cost, conveyance, all taxes etc. complete. |
| 24 | Supplying, fitting & fixing 20cmx30cm / 20cm x20cm special plain/printed series ceramic wall tiles of premium grade having thickness 6.5mm to 6.7mm conforming to IS 13753 in Wall, treads or steps and landing on 25mm thick bed of cement mortar (1:1) (1 cement, 1 sand) jointed with neat cement slurry mixed with pigment to match the shade of the tiles including cost, conveyance, all taxes etc. complete. |
| 25 | Fixing Chequred tiles in floors treads or steps and landing on 25mm thick bed of cement mortar 1:1 (1cement : 1sand) jointed with neat cement slury mixed with pigment to match the shades of the tiles including rubbing and polishing complete including cost, conveyance, all taxes etc. complete. |
| 26 | Supplying , fitting and fixing of openable UPVC doors with door frame of approved make with 6mm thick glass of approved quality complete with frame, shutters and all fitting and fixtures including cost, conveyance, all taxes etc. complete. |
| 27 | Supplying , fitting and fixing of two track UPVC sliding window of approved make with 6mm thick glass of approved quality complete with frame, shutters and all fitting and fixtures including cost of all door fittings and fixtures etc. including cost, conveyance, all taxes etc. complete. |
| 28 | Supplying, fitting and fixing of 5.5 mm thick hexagoanal Aluminum jally in windows as single groove, double groove andtapered clip as horizontal and vertical members for fixing ofaluminum jally and jointing angle conforming to standard Aluminium sections etc. including cost, conveyance, all taxes etc. complete. |
| 29 | Supplying all materials, labour and T&P for cutting grouves in Pucca Floors & walls for taking GI/ PVC Pipes and making good the damages as per specification including cost of all materials, labour & labour cess etc complete as per direction of Engineer-in-Charge. |
| 30 | Supplying all materials, labour and T&P for cutting holes through existing brick work including making good the same in cement mortar (1:4) for taking G.I. pipes and fittings /P.V.C. pipes and fittings all complete as per specification including cost of all materials, labour & labour cess etc complete as per direction of Engineer-in-Charge. |
| 31 | Supplying & fixing on wall surface Following dia Chlorinated Polyvinyl Chloride (CPVC) pipes conforming to IS:15778, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings including Supplying & fixing the pipe with clamps at 1.00 m spacing & jointing of pipes & fittings with one step CPVC solvent cement including making good the wall & Floor and testing of joints complete as per direction of Engineer-in-Charge.Supply pipe 32mm dia |
| 32 | Supplying & fixing on wall surface Following dia Chlorinated Polyvinyl Chloride (CPVC) pipes conforming to IS:15778, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings including Supplying & fixing the pipe with clamps at 1.00 m spacing & jointing of pipes & fittings with one step CPVC solvent cement including making good the wall & Floor and testing of joints complete as per direction of Engineer-in-Charge.Delivery pipe 25mm dia |
| 33 | Supplying & fixing on wall surface Following dia Chlorinated Polyvinyl Chloride (CPVC) pipes conforming to IS:15778, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings including Supplying & fixing the pipe with clamps at 1.00 m spacing & jointing of pipes & fittings with one step CPVC solvent cement including making good the wall & Floor and testing of joints complete as per direction of Engineer-in-Charge.Internal wiring pipe 20mm dia CPVC pipe |
| 34 | Providing and fixing on wall face unplasticised Rigid PVC Soil, Waste and Rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS: 5382, leaving10 mm gap for thermal expansion including testing as per specification including cost of all materials, labour & labour cess etc complete as per direction of Engineer-in-Charge. 110mm. dia UPVC Single Socket Pipe (Waste water line) |
| 35 | Supplying & Laying in trenches unplasticised PVC pipes conforming to IS:4985-2000 and specials of the following outside diameter for all classes including jointing with supply of approved solvent cement by non-heat application method including testing as per specification complete including cost of all materials, labour & labourcess etc complete as per direction of Engineer-in-Charge. 110mm. dia UPVC Single Socket Pipe (Soil Line) (Earth work in trenches to be measured and paid for separately) |
| 36 | Providing and fixing on wall face unplasticised PVC moulded fittings / accessories for unplasticised Rigid PVC Waste & Rain water pipes conforming to IS: 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion including testing as per specification including cost of all materials, labour & labour cess etc complete as per direction of Engineer-in-Charge. 110mm. Dia PVC Plain Bend |
| 37 | Providing and fixing on wall face unplasticised PVC moulded fittings / accessories for unplasticised Rigid PVC Waste & Rain water pipes conforming to IS: 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion including testing as per specification including cost of all materials, labour & labour cess etc complete as per direction of Engineer-in-Charge. 110mm. Dia PVC Cowel |
| 38 | Providing and fixing on wall face unplasticised PVC moulded fittings / accessories for unplasticised Rigid PVC Waste & Rain water pipes conforming to IS: 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion including testing as per specification including cost of all materials, labour & labour cess etc complete as per direction of Engineer-in-Charge. 110mm. Dia Coupler |
| 39 | Providing and fixing on wall face unplasticised PVC moulded fittings / accessories for unplasticised Rigid PVC Waste & Rain water pipes conforming to IS: 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion including testing as per specification including cost of all materials, labour & labour cess etc complete as per direction of Engineer-in-Charge. 75mm. Dia Plain Bend |
| 40 | Providing and fixing on wall face unplasticised PVC moulded fittings / accessories for unplasticised Rigid PVC Waste & Rain water pipes conforming to IS: 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion including testing as per specification including cost of all materials, labour & labour cess etc complete as per direction of Engineer-in-Charge. 75mm. Dia Door Bend |
| 41 | Providing and fixing on wall face unplasticised PVC moulded fittings / accessories for unplasticised Rigid PVC Waste & Rain water pipes conforming to IS: 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion including testing as per specification including cost of all materials, labour & labour cess etc complete as per direction of Engineer-in-Charge. 75mm. Dia Door Tee |
| 42 | Providing and fixing on wall face unplasticised PVC moulded fittings / accessories for unplasticised Rigid PVC Waste & Rain water pipes conforming to IS: 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion including testing as per specification including cost of all materials, labour & labour cess etc complete as per direction of Engineer-in-Charge.75mm. Dia Cowel |
| 43 | Supplying all materials, labour and T &P for fixing of different size PVC Nahani Trap of following size of self cleaning design with stainless steel grating or without vent arm including cutting holes in walls and making good to the damages etc. all complete as per specification including cost of all materials, labour & labourcess etc complete as per direction of Engineer-in-Charge. Nahani trap (110mm x 75mm) with grating |
| 44 | Supplying & fixing of bath/toilet fittings of the following size & specification including cost of fittings etc complete in all respect. Pillar Cock |
| 45 | Supplying & fixing of bath/toilet fittings of the following size & specification including cost of fittings etc complete in all respect. Short body Bib Cock |
| 46 | Supplying & fixing of bath/toilet fittings of the following size & specification including cost of fittings etc complete in all respect. Angle stop Cock |
| 47 | Supplying all labour and T &P for fixing UPVC Ball Valve 32mm Dia of the following size as per specification including cost of all materials, labour & labourcess etc complete as per direction of Engineer-in-Charge |
| 48 | Supplying all labour and T &P for fixing CPVC Union 32mm Dia of following sizes as per specification including cost of all materials, labour & labourcess etc complete as per direction of Engineer-in-Charge |
| 49 | Supplying & fixing Single Piece Water Closet (European type W.C pan) with integral 'P' trap conforming to IS 2556 : Part 8-2004, to the floor with wooden plug and chromium plated screws including jointing the trap with soil pipe in cement mortar (1: 1) etc with Supplying & fixing plastic seat and cover for wash down water closet with chromium plated brass hinges and rubber buffers all complete as per specification.. |
| 50 | Fixing water closet, squatting pan Porcelain 20\\" I.W.C.(Orissa Pan) conforming to IS 2556 : Part 3- 2004 duly embedded in cement concrete (1:4:8) using hard granite metal 4cm nominal size all complete as per specification |
| 51 | Providing and fixing Wall hung flushing cistern (White) with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete. |
| 52 | Fixing bowl pattern urinal conforming to IS 2556 : Part 6-1996 including connecting the urinal of Porcelain Flat back standing Urinal (Small) 430 x 260 x 350 mm sizes respectively with waste pipe by means of white lead mixed with chopped hemp etc all complete as per specification |
| 53 | Supplying & fixing 15mm dia PVC inlet connection pipe and making connection with pillar cocks and supply mains for wash basin complete as per specification and direction of Engineer-in-Charge. |
| 54 | Fixing flexible (Coil shaped) PVC waste pipe for wash basin or sink 32 mm dia 1150 mm with PVC waste pipe etc. complete as per specification & direction of the Engineer-in-Charge. |
| 55 | Fixing Wall hung wash basin 590x490x185 mm with half pedestal conforming to IS 2556 : Part 4-2004 with Cast Iron or M S brackets painted white including cutting holes in walls and making good the damages etc all complete as per specification |
| 56 | Supplying all materials, labour and T&P for fixing of 3 - Layer White Rotational Moulded Cylinderical Vertical water storage tanks (ISI marked) etc. all complete including cost of all materials, labour & labourcess complete as per specification and direction of Engineer-in-Charge. |
| 57 | Making soak pit 1.5m diameter 3.0 meter deep with 23 x 23 cm dray brick honey comb shaft with brick and S.W. drain pipe 100mm diameter, 1.8 m long complete as per standard design. With Flyask bricks |
| 58 | Recessed wiring to Tube light point/Fan point/exhaust fan point/ call bell point with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked with 20mm dia non-metalic PVC flexible conduit with 5A,250V Modular type switch (Make Cona/Anchor/ Havels ) & ceiling rose (Make Cona/Anchor/ Havels ) mounted on MS Box having front bakelite cover of suitable size with 1.0 Sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accessories and connections as per the direction of Engineer-in-charge. (Make of wire Finolex/ L&T/Anchor/ Havels/ V Guard). (Excluding the cost of supplying and fixing of 100mmx100mmx60mm MS Box with backlight cover -1no for Modular Switch) |
| 59 | Supplying & fixing of Modular GI box for 2-modules, 18 SWG (Nominal size) on surface/ recess with suitable size of Modular Base & Cover in front including cutting the wall & making good the same in case of recessed conduit as required including all accessories and connections as per the direction of Engineer-in-charge. |
| 60 | Supplying & fixing of Modular GI box for 8-modules, 18 SWG (Nominal size) on surface/ recess with suitable size of Modular Base & Cover in front including cutting the wall & making good the same in case of recessed conduit as required including all accessories and connections as per the direction of Engineer-in-charge. |
| 61 | Supplying & fixing of 5 pin 5/6 amp Modular Type Switch and 5/6 amp Modular Type socket outlet on the existing switch box/ cover including connections etc. required as per the direction of Engineer-in-charge. |
| 62 | Installation,Testing and Commissioning of Stepped type ceiling fan regulator, in existing switch box including connection with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor, earthing the regulator as required. |
| 63 | Supplying and drawing 1x1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked confirming to IS 694/1990 in existing surface/recessed PVC conduit as required including all accessories and connections as per the direction of Engineer-in-charge. (Make of wire Finolex/ L&T/Anchor/ Havels/ V Guard). |
| 64 | Recessed wiring to sub-main in 2x2.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked confirming to IS 694/1990 in 20mm dia non-metalic heavy duty flexible conduit 1.6mm thick alongwith 1 x 1.5 Sq.mm FR PVC insulated single core multistrand copper conductor as earth wire etc. as required including all accessories and connections as per the direction of Engineer-in-charge. (Make of wire Finolex/ L&T/Anchor/ Havels/ V Guard). |
| 65 | Recessed wiring to sub-main in 2x1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked confirming to IS 694/1990 in 20mm dia non-metalic heavy duty flexible conduit 1.6mm thick alongwith 1 x 1.5 Sq.mm FR PVC insulated single core multistrand copper conductor as earth wire etc. as required including all accessories and connections as per the direction of Engineer-in-charge. (Make of wire Finolex/ L&T/Anchor/ Havels/ V Guard). |
| 66 | Supplying & fixing of 5amp to 32amp rating 240V \\"B\\" series miniature circuit breaker suitable for lighting & other loads of the Single poles in the existing MCB DB ISI marked complete with connections testing and commissioning etc. as per the direction of Engineer-in-charge. |
| 67 | Supplying & fixing of Modular Blanking Plate of ISI Marked on the existing Modular switch board including connections etc. required as per the direction of Engineer-in-charge. |
| 68 | Supplying Fitting & Fixing, Installation, testing and Commissioning of Ceiling fan including wiring the down rods of standard length (upto 30 cm) with 1.5sq.mm FR PVC insulated single core multistrand copper conductor etc. Required as per the direction of Engineer-in-charge(.Celing Fan Havels Fusion 1200mm make 3 blade ) |
| 69 | Supplying, installation, of exhaust fan of heavy duty 300 mm sweep 1400 rpm 1600 cmh air delivery with louvers (Halonix heavy duty or any other equivalent reputed make star rated as approved) of exhaust fan in the existing wall, including fixing & conntection complete etc.as required and as per the direction of E.I.C. |
| 70 | Supplying Fitting & fixing of Tube light of ISI Marked on the existing Modular switch board and celing rose including connections etc. required as per the direction of Engineer-in-charge.(Havels make 20wt LED 6500K) |
| 71 | Supply, Installation, Testing, and Commissioning of 63 Amp DP Main switches of following capacity (IS 13940 Part 3/1993 ) on existing surface / wall mountnting and complete with HRC Fuse links, interconnections, earthing, etc. as required as per direction of Engineer in Charge.Make-SEIMENS/HPL/ ANCHOR/ L&T/HAVELS/C & S/ RK |
| 72 | Supplying & fixing of 2 WAY , SPN, Single Door MCB-DB with sheet steel enclosure, distribution board, on surface/ recess complete with tinned copper bus bar, neutral box bar, earth bar, din bar, detachable gland plate , inter connection , phospate & powder painted including earthing etc. as required (but without MCB/RCCB/Isolator) including all accessories and connections as per the direction of Engineer-in-charge. |
| 73 | Earthing with GI earth pipe 3m long 40mm dia ISI marked including all accessories and providing masonary enclouser with cover plate having locking arrangement and watering pipe etc. with charcoal & salt as required as per the direction of Engineer-in-charge. |
| 74 | Providing and fixing 8 SWG (4 mm) dia copper wire on surface or in recess for loop earthing from earth electrode to PANNEL BOARD directlyas directed by the Engineer in Charge. |
| 75 | Providing supplying fitting and fixing of 2 HP (Crompton) 1 Phase oilfiltered High Speed Tool pump set of KSB/ kirlosker/ crompton/texmo and other IS make with control pannel including cost of pump with 2.5sqmm three core PVC coated copper flat cable, 32mm dia HDPE pipe / nipple / bolt and PVC coated 6mm wire rope , U bolt , M.S clamp with all labour, T&P, taxes as applicable at site as per specification and direction of engineer in charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 16, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 30, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 8 daysDec 01, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 9 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender