Tender For Construction Of Integrated Drone Training Shed Near Drone Obstacle Training Area School Of Arty Devlali
Tender Value
43.42 Lakhs
Estimated cost
Bid Submission
30 Nov 2026
13 days left
EMD
87000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Nashik → Maharashtra
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of Integrated Drone Training Shed Near Drone Obstacle Training Area School Of Arty Devlali
BOQ
| Sl. No. | Item Description |
| 1 | Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in soft & loose soil complete all as specified and directed |
| 2 | Excavating in trenches, n.exc 1.5m wide and n.exc. 1.5m in depth for foundation, etc. or for shaft, wells and cesspits in Hard / dense soil all as directed. |
| 3 | Excavation in trenches n. exc. 1.5 mtr in wide and n. exc. 1.5 mtr in depth for laying of underground cable and getting out in soft/loose soil complete all as specified and directed. |
| 4 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm all as directed. |
| 5 | Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point all as directed. |
| 6 | M&L for Hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface all as directed |
| 7 | M&L for moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering etc complete all as directed. |
| 8 | M&L PCC 1:4:8 type D2 using 20mm grade stone aggregate as in foundation concrete etc complete all as specified and directed. |
| 9 | Anti-termite treatment the top surface of filled earth at the rate of 5 lit of emultion per sqm of surface area all as directed. |
| 10 | Anti-termite treatment the soil under plinth protection at the at the rate of 5 lit of emultion per sqm of surface area all as directed. |
| 11 | M & L for providing reinforced cement concrete M-25, using 20 mm graded stone aggregate as in foundation including rafts, footing, foundation beams, plinth beams, base of columns and the like complete all as specified and directed. |
| 12 | M & L for providing reinforced cement concrete M-25, using 20 mm graded stone aggregate, as in columns, pillars, piers, posts, struts and the like complete all as specified and directed. |
| 13 | M & L for providing reinforced cement concrete M-25, using 20 mm graded stone aggregate, as in beams, cantilevers, bressummers, lintels over 1.50 m span and the like complete all as specified and directed. |
| 14 | M&L RCC M-25 as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves all as specified and as directed. |
| 15 | M&L RCC M-25 as in Chullah hoods; stairways (except spiral staircases) including steps (square or spandril), string pieces, carriages, etc., complete, any section straight or winding, but excluding landings; RCC water tanks upto 1500 litres all as directed. |
| 16 | M & L for use and waste of form work to sides of concrete foundation, footing, bases of columns, raft & raft beams, sides and soffits (if any) of foundation and plinth beam and similar works in rough finished flat surface of concrete complete all as specified and directed. |
| 17 | M & L for use and waste of form work to sides of pillars, posts, struts, piers, columns and stanchions in rough finished surface of concrete complete all as specified and directed. |
| 18 | M & L for use & waste of formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs etc. also splayes between floors and beams in rough finished surface of concrete complete all as specified and directed. |
| 19 | Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; n.exc 200m thick (Horizontal or sloping) etc complete all as specified and directed. |
| 20 | Formwork to staircases with sloping or stepped soffits including risers and stringers (excluding landing) in rough finished surface of concrete complete all as specified and directed. |
| 21 | Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) in rough finished surface of concrete complete all as specified and directed. |
| 22 | M&L TMT bars 10mm dia and over, cut to length, bent to shape required, incl cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips etc complete all as specified and directed. |
| 23 | Ditto but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders etc complete all as specified and directed. |
| 24 | M&L for PCC 1:3:6 type C-1 (20mm graded stone aggregate) cast -in -situ as in copings including use and waste of formwork as required etc complete all as specified and directed. |
| 25 | M&L Fly ash Brick work with old size bricks, straight or curved on plan exc 6m mean radius, built in cement mortar 1:6 complete all as specified and directed. |
| 26 | M&L for Rendering in 10 mm thick plastering 1:6 on brick work or concrete surfaces of any description in wall/ceiling etc finished surfaces even and smooth (without using extra lime or cement) complete all as specifed and directed. |
| 27 | M&L for applying one coat of alkali resistant primer etc complete all as directed. |
| 28 | M&L for applying 2mm thick wall care putty External/Internal on wall all as specified and directed. |
| 29 | M&L for applying two coats of oil emulsion distemper on wall etc complete all as directed. |
| 30 | M&L for applying three coat of white wash on ceiling complete all as specified |
| 31 | M&L for Rendering 15mm thick in cement morter 1:4 on fair faces of brick work/concrete surfaces including neeru finish to plastering as specified. |
| 32 | M&L for Two Coat exterior weather coat (Apex paint or Eqivalent) over one coat of exterior primer, complete all as directed. Make : Asian Apex Ulltima or equivalent. |
| 33 | M & L for 75 mm thick Cement concrete type C-2, 1:3:6 using (40 mm graded stone aggregate ) as in Plinth protection all as directed. |
| 34 | M&L for Double charged Vitrified tiles 8-10mm thick (square/rectangular) polished, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm, in floors including screed bed 15mm thick in Cm 1:6 etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed. |
| 35 | Ditto all as item No. 33, but in skirting over 8 to 10mm thick backing coat in CM 1:4 complete all as specified and directed. |
| 36 | M&L joint free non - skid Ceramic tiles 7 to 8 mm thick (Coloured) (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. with and including 15mm thick screed bed in CM 1:6,set and jointed in neat cement slurry and pointed in white or coloured cement to match etc complete all as specified and directed. |
| 37 | M&L for joint free coloured glazed ceramic tiles in vertical surface of size 450 X 300 X 7mm thick of different shade colour and pattern as approved, over and including 10 mm thick rendering in CM 1:4 as backing coat finished to receive wall tiles, set and jointed in neat cement slurry and pointed in white or colour cement to match etc complete all as directed and specified. |
| 38 | M & L for Machine cut cudappah stone slab 20-25mm thick over cement screed base, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete including rubbing and polishing complete all as specified. |
| 39 | M & L for 15-18mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite. including Screed bed or bedding layer of mortar 15 mm thick for laying floor finishes complete all as specified. |
| 40 | Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified and as directed. |
| 41 | S&F for powder coated aluminium ventilator shutters with frame not less than 0.55 Kg/Rm, half bottom portion fixed with 4mm thick glass with fixed type shutter and top half portion lower type with 4mm thick frosted glass and outer side fixed with stainless steel wire mesh, shutters aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, necessary aluminium fittings etc complete all as specified and directed. |
| 42 | Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 50 x100 mm single rebate comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made Make : ECHON/Sintex/Rajshree/Navaratan. |
| 43 | S&F 28-30 mm thick prelaminated moulded WPC factory made 100% solid door (conforming as per IS-4020) made from 100% lead free single extruded with 2, 4 or 6 raised panel design on the front side with 10 mm deep mould on single side with wood grain texture and back side palin with density not less than 600 Kg/cum. Manufactured by an ISO : 9001-2015 certified company. The door should be water proof, termite proof, fire etardant and having screw holding capacity complete all as specified |
| 44 | S&F 28-30 mm thick Prelaminated Flush WPC factory made 100% solid door (conforming as per IS-4020) made from 100% lead free single extruded side with wood grain texture with density not less than 650 Kg/cum. Manufactured by an ISO : 9001-2015 certified company. The door should be water proof, termite proof, fire etardant and having screw holding capacity complete all as specified and directed. |
| 45 | S&F 100 mm long Butt hinges, Stainless Steel, with mild steel hinge pin, bright polished and fixed, typeB-11 complete all as specified and as directed. |
| 46 | S&F Floor door stopper 140mm of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor all as specified and as directed. |
| 47 | S&F 150 mm long Extruded Stainless Steel handles designer type, fabricated type polished complete all as specified and as directed. |
| 48 | S&F 150mm size Stainless Steel barrel tower bolts, with cast or sheet barrel and rolled or cast bolts and fixed complete all as specified and as directed. |
| 49 | M&L for 250mm longStainless Steel, sliding door bolt withsand or die-cast brass hasp, staple (bolt type) and fixing bolt with rolled or drawn brass bolts and fixed complete all as specified and as directed. |
| 50 | S&F factory made 100 % solid wood plastic composite (WPC) flush type shutter of 18mm thickness one side laminate consisting of panel of PVC profile of 18mm (+ 0.7mm) thick of denisity 600 kg per cum manufactured by ISO-9000 certified company using for shutter cillicia ply 18mm thick and fixed with frame. The thickness of shutter is edges painted by matching colour of PVC lining of plain/prelim coloured PVC sheet using etc complete as per manufacture specification.Make : ECHON/Sintex/Rajshree/Navratan |
| 51 | S&F soft closing hinges 35 mm of 0 crank( KH-001) OR 8 crank (KH-002) openable at 110 degree for kitchen cabinet shutters Make :Hexa, Hettich, Hafele |
| 52 | S&F for door/shutter catcher, magnetic stopper/holder with striking plate for WPC board cabinets, cupboard shutters complete all as specified. |
| 53 | S&F vitreous china single piece EWC of Size: 360x640x685 mm, Single Piece WC with PP soft close slim seat cover, Hinges, Fixing Accessories, Accessories Set, and Cistern fittings, S Trap - 220 mm / P Trap-180 mm complete all as specified and directed.Make Jaquar cat part No SLS-WHT-6851S220PP or SLS-WHT-6851P180PP or equivalent in kohlar, grohe and Roca |
| 54 | S&F vitreous china Wash Basin counter Top 600x400x185mm including stainless steel bottle trap and 40 mm dia GI pipe up to Floor trap complete all as specified and directed by Engr-in-Charge Make : Cat Part No SLS-WHT-6601 & ALD-769L250x190 of Jaquar or equivalent in kohlar, grohe and Roca |
| 55 | S&F vitreous china Sensor Urinal of Size: 480x300x740 mm,wall hung urinal back inlet urinal with DC sensor, removable ceramic waste plug with water seal complete all as specified and directed.Make Jaquar cat part No URS-WHT-13255 or equivalent in kohlar, grohe and Roca |
| 56 | S&F Curved shaped urinal partition of height 900 mm width 450 mm with frosted glass 8mm /10mm thicked chrome finished complete all as specified and directed.Make Jaquar cat part No JSE-CHR-110UC450X or equivalent in kohlar, grohe and Roca |
| 57 | S&F Sensor Flushing Valve for Urinal with Complete Kit (Battery Operated) (Suitable For Urinal URS-WHT-13255) complete all as specified and directed.Make Jaquar cat part No SNR-51097 or equivalent in kohlar, grohe and Roca |
| 58 | S&F stainless steel chromium plated towel ring complete all as specified and directed Make Jaquar cat part No vgs-ACN1121BN OR EQVL IN Kohlar, Roca/Grohe |
| 59 | S&F stainless steel chromium plated SOAP dispenser with glass bottle complete all as specified and directed Make Jaquar cat part No vgs-ACN1135N OR EQVL IN Kohlar, Roca/Grohe |
| 60 | S & F 15 mm bore, fancy type, angular valve, cast copper alloy, screwed down, high pressure, with crutch or butter fly handle, screwed both ends for iron pipe or for unions complete all as specified and as directed by Engr-in-Charge. Make : Cat Part No FLR-5053 N of Jaquar or equivalent in kohlar, grohe and Roca |
| 61 | S&F for 15mm bore, 450mm long, PVC connections with brass unions internally threaded both ends complete fixed to iron pipe at both ends as fixed complete all as specified and as directed.. |
| 62 | S&F Health Faucet (ABS Body) with 1.20 M Long PVC Tube and wall Hook screwed down to GI pipe or union/angle valve complete all as specified and directed by Engr-in-charge Make Jaquar Code No- ALD-CHR-583 or equivalent in kohlar, grohe and Roca |
| 63 | S&F 15mm dia brass chromium plated Pillar Cock with Extension Body single lever tall boy with 150mm extension body fixed spout without popup waste system with 600mm long braided hoses for mixing hot and cold water, screwed down for 15 mm dia bore GI Pipe complete all as specified and directed. Make Jaguar Cat Part No: FLR-5021M or equivalent in kohlar, grohe and Roca |
| 64 | S&F 15mm dia brass chromium plated two way bib cock with long flange screwed down for 15 mm dia bore GI Pipe complete all as specified and directed.Make Jaguar Cat Part No: OPP-15041PM or equivalent in kohlar, grohe and Roca. |
| 65 | S&F mirrors bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers etc with Fibre touch multi colour light arragement complete all as directed. |
| 66 | S&F rotational moulded polythylene water storage tank 1000 ltrs capacity (cylindrical/ vertical with closte top) hoisted and fixed in position all as specified in SSR Part-I including providing and fixing ball brass valve high pressure with polythene float and fly nut, 25mm bore complete for following capacity of tanks complete all as specified. |
| 67 | S&F for 15mm bore steel tubing and connections Tubes, 'light grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floorscomplete all as specified and as directed. |
| 68 | S&F for 20mm bore steel tubing and connections Tubes, 'light grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floorscomplete all as specified and as directed. |
| 69 | S&F for 25mm bore steel tubing and connections Tubes, 'light grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floorscomplete all as specified and as directed. |
| 70 | Cutting chases in Stone, concrete block or slab walls, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10cm girth all as specified and as directed. |
| 71 | S&F 25mm bore Gun metal gate valves with iron wheel head screwd both ends for iron pipes complete all as specified and directed. |
| 72 | S&F for 110mm bore of PVC (SWR) pipes single socketed in any length with rubber ring joints laid on wall complete all as specified and as directed. |
| 73 | S&F for 75mm bore of PVC (SWR) pipes single socketed in any length with rubber ring joints laid on wall complete all as specified and as directed. |
| 74 | S&F PVC (SWR) bend with access door any radius 110mm complete all as specified and directed. |
| 75 | S&F PVC (SWR) bend with access door any radius 75mm complete all as specified and directed. |
| 76 | S&F for 75mm bore PVC (SWR) branch piece, single (single Y) equal or unequal complete all as specified and directed. |
| 77 | S&F 75 mm PVC (SWR) junction single T equal or unequal complete all as specified and directed . |
| 78 | S&F 75mm bore PVC (SWR) floor trap plain with grating including jointing with solvent cement complete all as specified and as directed. |
| 79 | S&F LDPE pipe 40mm bore fixed to wall/ceiling with bends/elbow complete all as specified. |
| 80 | M&L 300 mm dia RCC NP-3 pipes (for depth 0.70m - 1.65 m) laid on 150mm thick PCC 1:4:8 including packing under and haunching against sides, with excavation in any type of soil, inclusive of manholes RCC precast manhole cover having 6 mm MS plate embedded all around/fibre reinforced cover with angle iron frame pipes all as specified. |
| 81 | M&L Soakage wells of size 1.20m Dia and depth 3.00m excavation, in any type of soil, foundation in PCC 1:3:6, walls of honey combed masonry with top ring of M25 concrete including intercepting chamber and screen chamber made of Brick masonary in CM, RCC cover slab in M25/ SFRC cover, interconnecting pipes of RCC/DWC complete filled with brick bats complete all as specified and directed. |
| 82 | M&L for On site Hume Pipe septic tank designed to carry sewage and sullage water, excavation in any type of soil, PCC 1:4:8 below foundation, Vent shaft, connection etc., complete for including beams etc with vent shaft, manhole openings with cover connection etc, complete with effective dia of 600mm to 750mm and length of 2.50 meter to 3.00 meter for 10 users all as specified and directed. |
| 83 | M&L for rendering 10mm thick CM (1:4) on roof slab top, mixed with water proofing compound finished even and smooth without using extra cement complete all as specified. Note: Water Proofing compound shall be measured and paid separately. |
| 84 | M & L for cleaning the newly plastered surfaces of concrete ( roof etc) with wire brushes and applying water proofing treatment as under :- i) Applying one coat of bituminous primer @ 0.25 Kg/Sqm ii) Providing and laying 3 mm thick APP modified water proofing membrane weighing not less than 3.0 Kg / Sqm reinforced with non woven polyester mat weighing not less than 150 gm/Sqm all as specified procured from any one of the approved manufacturer's instructions iii) Apply two coat of aluminium paint @ 0.15 Kg/Sqm over membrane over roof surfaces complete all as per manufacturer's instructions and as directed . |
| 85 | Supply only water proofing compund as specified and directed. |
| 86 | S & F powder coated aluminium sections for doors, partition including fabrication of frame and fixing with necessary with one or more rebates including joining cleat for fixing etc. complete all as specified by Engr-In- Charge. Please Enable Macros to View BoQ information |
| 87 | S & F powder coated aluminium sections for doors, partition including fabrication of frame and fixing with necessary with one or more rebates including joining cleat for fixing etc. complete all as specified by Engr-In- Charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 16, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 30, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 13 daysNov 02, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender