Defence Statutory Bodies & Commissions/Committees Closing in 16 days TDR #58543131

Tender For Addn / Altn Of Administrative Building (P-01) At Hq 34 Weu And Three Minor Works Under Ge Minniebay, Sri Vijaya Puram (8897/E8)

Issued by Statutory Bodies & Commissions/Committees · South Andamans, Andaman And Nicobar Islands
Tender Value
47.50 Lakhs
Estimated cost
Bid Submission
07 Dec 2026
16 days left
EMD
95000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
South Andamans → Andaman And Nicobar Islands
EMD Exemption
Available
Quantity
Not Available

Project Description

Tender for Addn / Altn Of Administrative Building (P-01) At Hq 34 Weu And Three Minor Works Under Ge Minniebay, Sri Vijaya Puram (8897/E8)

BOQ

Name of Work:- ADDN / ALTN OF ADMINISTRATIVE BUILDING (P-01) AT HQ 34 WEU AND THREE MINOR WORKS UNDER GE MINNIEBAY, SRI VIJAYA PURAM (8897/E8)
Sl. No. Item Description
1ADDN / ALTN OF ADMIN BLDG (P-01)Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.
2Demolition of stone slabs and tiles of any description or thicness in floors laid bedded pointed in any cement mortor in any position not otherwise specifically provided complete all as specified and directed.
3Demoliton of cement concrete unreinforced in ground floor and paving n exc 15cm thickness complete all as specified and directed.
4Demolition of Precast Concrete work/ precast concrete block built in Cement Mortar including all quoins arches pillars etc complete all as specified and as directed.
5M&L precast cement concrete block masonry with solid block, exc 10cm in width in PCC type C-1, 1:3:6 (using 20mm graded stone aggregate) set in CM (1:6) all as specified.
6M&L Rendering 10 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 and finished fair and even without using extra cement.
7M & L for 40 mm thick, PCC 1:2:4, Type B-0, using 12.5mm graded aggregate as in sub base for flooring/levelling coarse etc complete all as specified and as directed.
8M&L for Double Charged Vitrified ceramic coloured tiles (dark shade) 10mm thick (Square/rectangular) area of each tile not exceeding 0.36sqm in floor, over 15 mm thick screed bed in CM 1:6 on floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade as complete all as specified and directed.
9M&L for Double Charged Dark Vitrified ceramic coloured tiles 10mm thick (Square/rectangular) area of each tile not exceeding 0.36sqm in skirting, over 15 mm thick screed bed in CM 1:6 on floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade as complete all as specified and directed.
10M & L for non skid ceramic coloured joint free tile 7 to 8 mm thick Concept tiles design as approved (Sqaure or rectangular) area of each tiles eexceeding 0.06 Sqm but not exceeding 0.11 Sqm in floors etc of pattern as approved over and including 15 mm thick screed bed in Cement mortar 1:4, set and jointed in neat cement slurry and pointed in white or coloured cement to match all as specified and as directed.
11M&L for Coloured Non-skid/matt finish Ceramic tiles 7 to 8 mm thick exc. 0.18 sqm but n.exc 0.38sqm area of each tiles in steps raiser and thread in single tiles etc set and jointed in neat cement slurry and pointed in coloured cement to match as in floor over and including 10mm thick screed bed in CM (1:4) complete as specified and directed.
12M&L for glazed coloured ceramic Concept designer tiles of 7mm thick and area exceeding 0.11 sqm and not exceeding 0.18 Sqm as approved by GE, fixed in vertical surfaces such as in dado set and jointed in neat cement slurry and pointed in white or coloured cement to match floor tile over and including a backing coat in Cement Mortar 1:4, 10mm thick all as specified and directed.
13M&L for 20mm Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite laid over and including 20 mm thick screed bed in CM 1:6.
14Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations all as directed by Engr in Charge.
15Taking down chowkats or frames not exceeding 1.5 Sqm (with shutters & grill (if fixed) without taking off shutters from the frame).
16Taking down chowkats or frames exc 1.5 Sqm and not exceeding 4 Sqm (with shutters and grill (if fixed) without taking off shutters from the frame)
17S&F for Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 50 x 100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2 , modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately).
18S&F Factory made single 30 mm thick extruded WPC (Wood Polymer Composite) solid moulded flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws etc., complete all as specified and as directed. (Note: stainless steel butt hinges and necessary S S screws incl in this item)
19M&L for Powder Coated (minimum thickness of powder coating 50 micron) Anodised aluminium frame for doors, windows, ventilators and partition with one or more rebates including joining cleat for fixing etc. complete all as specified
20S&F Anodised aluminium powder coating of any colour (Thickness or powder coating not less than 50 micron) door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified
21S & F only 4 mm Plain sheet glass ordinary quality, in square not exc 0.5 sqm each complete all as specified and as directed.
22S&F in 12mm thick Prelaminated particle board, interior grade, prelaminated on both sides with decorative choice lamination fixed as in panels of Aluminium door shutters, partition etc complete all as specified and directed.
23M&L for aluminium (Extruded section) body door closer, hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000mm in width and of weight between 60 to 80 kg complete all as specified and as directed.
24M& L in repairs Brass mortice lock vertical type size 100 mm 4 leavers with stain less steel handle set suitable for right or left, inside or out side opening doors complete all as speicified and directed.
25S&F for fully glazed shutters made out of toughened glass shutter suitable for opening n.exc 1.2m wide as approved by GE, drillig holes for fixing handles incl provision of stainless steel matt finish handle 400mm-02nos, suitable locking arrangements , center lock, stainless steel floor spring, patch fittings consist of bottom patch, top patch and top pivot with stainless steel fixing plate etc. complete incl taking down old unserviceable glass door all as dircted by Engr-in-charge. Note:- The unit rate quoted shall deemed to include all necessary builders hardware except door closure complete all as specified directed.
26Providing and fixing factory made uPVG white colour Sliding window of area n exc 2.00 sqm Three track made of extruded profiles with wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 52mm), sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2+ -0.2mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware [Touch Lock of zinc alloyed (white powder coated), steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories with drainage facility,glazing beading and sides to be filled with silicon sealent. Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net Opening will be measured lor payment purpose.
27S&F Sheet glass, 4.8 mm ordinary quality and glazing with oil putty in square in n exc 0.5 sq.m in each pane complete all as specified and directed.
28S&F 4.0mm thick,figured glass pin head type & glazing with oil putty in square n exc 0.5 sq.m in each pane from from Aluminium section fixed with beads/glazing clips all as spd
29Supply only Stainless steel wire cloth 0.36 mm in nominal dia of wire average width of aperture 1.40 mm and fixed with tinned tacks of stainless steel wire staples to steel shutters or fixed with wooden beads to wooden joinery, complete all as specified and directed.
30S&F Framed work such as grills, gratings, etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 complete all as specified and as directed.
31S&F for 125 mm long Butt hinges, extruded brass, with mild steel hinge pin, bright polished and fixed, type B-11 etc., complete all as specified and as directed.
32S&F for 150mm aluminium anodised barrel tower bolts of extruded section and fixed etc., complete all as specified and as directed.
33S&F for 300mm aluminium alloy anodised sliding bolts with hasp, staple and fixing clips of sheet, cast or extruded section fixing bolts and sliding bolts of extruded section or cast aluminium alloy and fixed etc., complete all as specified and as directed.
34S&F extruded aluminium alloy handle fabricated type anodised 150mm long complete all as specified and directed.
35S& F 140 mm over all length of cover plate, floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring, fixed in floor. Complete all as specified and directed.
36Preparing new steel or iron surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer. Complete all as specified and directed.
37M & L in repairs stainless steel curtain rods with L clamps and with suitable globe brackets and brass screws all as specified
38Taking down cement plaster on brick or stone wall and racking out joints hacking for key sucrubing down with water etc.,complete all as specified and directed.
39M&L for rendering to concrete or block masonry surface other than fair faces of brick surface, 10mm thick in cement mortar 1:6, surfaces finished even and smooth without using extra cement complete all as specified and directed.
40M&L for rendering 5mm thick in CM 1:3 on ceiling surfaces finished even & smooth without using extra cement complete all as specified and as directed.
41M&L for rendering 15mm thick cement plaster on fair faces of concrete block masnory in two layers, base layer 10mm thick in CM (1:6) and top layer 5mm thick in CM 1:4 mixed with WPC as per manufacture' s instructions, finished even and smooth without using extra cement complete all as specified and directed by Engineer-in-Charge. Note :- WPC shall be measured and paid seperately
42Supply only water proofing compound
43M&L for Providing and applying plaster of paris putty of 2 mm thickness over plastered/ complete removed surface to prepare the surface even and smooth complete all as specified and directed.
44M&L for applying two coats of plastic emulsion paint over a coat of primer on newly plastered surface of ceiling including preparation of surface complete all as specified and directed. Make: Asian Paint Apcolite advanced Premium paint or equivalent as approved by GE.
45M&L for preparation of newly plastered wall surface applying two coats of plastic emulsion paint over a coat of primer complete all as speicified and as directed.
46M&L for preparation of New plastered surface and applying two coat of 100% premium acrylic emlusion paint having VOC less than 50gm/litre and UV resistance as per IS 15489-2004, Alkali & fungal resistance, dirt resistance exterior paint of WHITE COLOUR with silicon additives coat applied @1.67litre/10sqm over and including priming coat of exterior primer applied @2.2kg/10sqm complete all as specified and as directed. Note: Asian Paints( Apex Ultima), Berger (weather coat Long life Fiexo) Nerolac (Excel Total), Shalimar Paints (Weatherpro+Super Luxury Emulsion) The rate inclusive of scaffolding at any height
47M&L for complete removal of existing treatment and preparation of old plastered wall surface using mechanical means and removing all fungus, black stains, algae etc., and applying two coat of 100% premium acrylic emlusion paint having VOC less than 50gm/litre and UV resistance as per IS 15489-2004, Alkali & fungal resistance, dirt resistance exterior paint of WHITE COLOUR with silicon additives coat applied @1.43litre/10sqm over and including priming coat of exterior primer applied @0.9litre/10sqm complete all as specified and as directed. Note: Asian Paints( Apex Ultima), Berger (weather coat Long life Fiexo) Nerolac (Excel Total), Shalimar Paints (Weatherpro+Super Luxury Emulsion) The rate inclusive of scaffolding at any height
48M&L for complete removal of exisitng treatment and preparation of old plastered surface using mechanical means and removing all fungus, black algae etc and applying two coat of 100% premium acrylic emlusion paint (company depot tinted) having VOC less than 50gm/litre and UV resistance as per IS 15489-2004, Alkali & fungal resistance, dirt resistance exterior paint of with silicon additives coat applied @1.67litre/10sqm over and including priming coat of exterior primer applied @0.9litre/10sqm complete all as specified and as directed. Note: Asian Paints( Apex Ultima), Berger (weather coat Long life Fiexo) Nerolac (Excel Total), Shalimar Paints (Weatherpro+Super Luxury Emulsion) The rate inclusive of scaffolding at any height
49M&L for complete removal of existing treatement and applying two coats of plastic emulsion paint over a coat of primer on wall surface all as specified and directed. Make: Asian Paint Apcolite Advanced Premium Emulsion Paint or equivalent as approved by GE.
50M&L for compolete removal of existing treatment and applying two coats of plastic emulsion paint over a coat of primer on ceiling surfaces all as specified and directed. Make.Asian Paint Apcolite Advanced Premium Emulsion Paint or equivalent as approved by GE
51M&L for preparation of old steel or iron surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer etc., complete all as specified and directed.
52Dismantling of wall/ceiling boards (fibre, pulp, insulation etc.,)/ insulation boards/slabs/blankets of any thickness including over fillets ridges etc., complete all as specified and directed.
53S&F aluminimum anodised snap grid false ceiling of standered aluminimum section of size 38mm x25mm x 24 mm, weight 0.363 kg/RM main /cross tees of size 38.5mm x 25 mm x1.4mm weigh 0.24 kg/RM grid size n exc 610 mm x610 mm suspended false ceiling with 4mm dia GI wire interval n exc 600mm centre to centre for main and cross tees fixed to roof slab, roof truss fixed with suitable size MS hook and fastening bolts etc., incl E board classic 4mm thick oceanic sheer of size n exc 610mm x610mm size fixed in ceiling with clips to aluminimum snap grid and preparaion of new surface and applying two coat of oil bound distemeper over a one coat of primer complete all as specified and directed.
54M&L providing and fixing accoustic sound proof wall panelleing comprising 50mm thick rock wool slabs of density not less than 48kg/m3 coverd with decorative accoustically transparent fabric, fixed over a aluminium framing with all accessories complete all as specified and directed.
55M&L for providing and fixing under deck insulation using 50mm thick resin bonded glass wool slabs of density not less than 48kg/m3 having NRC not less than 0.85 faced with aluminimum foil fixed to RCC ceiling by GI wire mess and cleats including vapour barrier, sealant and all accessoried complete all as specified and directed.
56Taking down 20mm Steel / CPVC tubing and connections complete all as specified and as directed
57Taking down 25mm Steel / CPVC tubing and connections complete all as specified and as directed
58Supply and laying of CPVC pipes 20 mm dia outer bore SDR 11 &plain CPVC SDR 11 fittings on walls /ceilings or laying in floors complete all as specified.
59Supply and laying of CPVC pipes 25mm dia outer bore SDR 11 &plain CPVC SDR 11 fittings on walls /ceilings or laying in floors complete all as specified.
60S&F 20 mm Brass Elbow
61S&F 20 mm Brass Elbow reducer(3/4 x1/2)
62S&F Male Brass Threaded Adaptor (MTA/MBTA) 20mm bore
63S&F Male Brass Threaded Adaptor (MTA/MBTA) 25mm bore
64S&F Female Brass Threaded Adaptor (FTA/FBTA) 20mm bore
65S&F Female Brass Threaded Adaptor (FTA/FBTA) 25mm bore
66Supply and fixing 20 mm outer dia Brass Tee
67Supply and fixing 25 mm outer dia tank Adaptor
68Supply and fixing 20mm outer dia union
69M&L Cutting chases in concrete block walls, pinning in, making good to facings where required and pointing in cement mortar 1:3 for concealed water tubing etc., and making good, cutting not ecx 10 cm girth complete all as specified and as directed.
70S&F Vitreous China wash down water closet pan (pedestal pattern) of size 380x610x805mm Rimless bowl with cistern for coupled, WC with UF soft close slim seat cover hinges, dual flush cistern fitting, conversion bend , fixing accessories and accessories set complete all as specified and as directed. Model No: Jaquar VGS-WHT 81753S250UFSMZ
71S&F in repairs vitreous chain wash basin of oval vessel type including fitting over granite platform waste coupling, waste pipe and brackets etc complete all as specified and directed. Note: Granite platform will be measured and paid separately.
72S&F in repair vitreous china urinals, half stall type, all as sper Hindware cat part no.60022/60023 or equivalent complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2 securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement fixing automatic flush cistern with brackets, flush pipe, grating and union for dischare pipe (inclusive of fixing supply pipe to flushing cistern, trap and waste pipe) complete all as specified and directed.
73S & F in repair Bib Taps with flange, cast copper alloy, 15 mm dia, Chromium Plated, Fancy Type with crutch or butterfly handle, screwed down for iron pipe and fixed etc complete all as specified and as directed.
74S&F in repair quarte turn two way Bip taps, cast copper ally, 15mm dia, chromium plated, fancy type for iron pipe and fixed etc., complete all as specified and directed. Make: Jaquar, Prayag, Parry ware( super fine), Prima, Pearl
75S&F in repairs stop valves cast copper alloy chromium plated with long shank and cup fancy type screwed down high pressure screwed both ends for pipe or union fixed for 15mm bore,including necessary cutting and making good wall or floor tiling to match existing(tiles to be paid supplied only rates) etc complete all as specified and as directed.
76S&F in repairs brass chromium plated hand shower (Health faucet) ABS body) with 1 meter long Easy Flex tube in chrome finish & wall hook complete all as specified and directed. Make: Jaquar, Prayag, Parryware (Super fine), Prima, Pearl
77S&F in repairs quarter turn pillar taps, cast copper alloy, chromium plated, Fancy type, 15mm diam, with long screwed shanks and fly nuts screwed for iron pipe and fixed complete all as specified and as directed.Make Jaquar, Prayag, Parry ware (Super fine), Prima, Pearl
78S&F in repair soap dish, brass chromium plated of approximate size 160x160x90mm with screws complete all as specified and as directed. Make: Jaquar, Prayag, Parry ware (super fine), Prima, Pearl
79S&F in repair CP toilet pater holder fancy type high quality Make Jaqar, Prayag, Parry ware (Super fine, prima Pearl complete all as specified and directed.
80S&F in repairs towel Rail CP Brass Make Prayag Cat No.BA 10 S or equivalent complete all as specified and directed.
81S/F corner glass shelf 300mm, matt finished, chromium plated (MCH/Colour CP) with bracket etc., of make-Jaquar complete all as specified and as directed.
82S/F Towel ring round with round flange chromium plated of make-Jaquar complete all as specified and directed.
83S&F in repairs PVC flexible connection with PTMT nuts, of 15mm dia and 600mm long with brass unions and rubber washers on either side, for connecting water supply line to WHB, flushtank ,Geyser etc, all as specified.
84S&F in repair PVC flexible waste pipe of 32mm for wash hand baisn and kitchen sink complelte all as specified and directed.
85S&F in repair 32mm (Dia of discharege pipe) waste copling of PTMT (half or full threaded) Minimum weight 32mm-45gms/40mm-60gms complelte all as specified and directed.
86S&F in repair stainless steel sink with drainage board made out of 1.00 mm thick sheet with plug, washers, Ms angle cantilever brackets for suitable size and connecting union to pipe of overall size 1140 mm x 500 mm and bowl size 510mm x 400 mm x 190 mm all as specified.
87S & F 600 mm X 450 mm levelled Edge Mirror of selected quality glass, 5 mm thick, mounted on 6 mm thick AC building board or commercial plywood and fixed to wooden plug with CP brass screws and cup washers complete all as specified and as directed.
88Demolition and breaking up drain pipes of size 75/100 mm dia (Salt glazed ware, AC or Reinforced concrete, PVC (SWR)) set in cement mortar
89S & F 110mm bore PVC [SWR] pipes single socketed, in any length with rubber ring joints, fixed to walls complete all as specified and as directed.
90S & F 110mm bore PVC [SWR] pipes single socketed, in any length with rubber ring joints, laid in trenches or as in floors complete all as specified and as directed.
91S & F 75mm bore PVC [SWR] pipes single socketed, in any length with rubber ring joints, fixed to walls including necessary brackets, clamps as in down pipes complete all as specified and as directed.
92S & F 75mm bore PVC [SWR] pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and as directed.
93S & F 75mm bore PVC [SWR] Bends of any radius including jointing with solvent cement complete all as specified and as directed.
94S & F 75 mm bore PVC [SWR] Junction Single [Single \\"T\\"] equal or unequal with access door including jointing with solvent cement complete all as specified and as directed.
95S&F PVC (SWR) bends with access door 75mm dia
96S & F 110mm bore PVC [SWR] Bends of any radius including jointing with solvent cement complete all as specified and as directed.
97S & F 110 mm bore PVC [SWR] Junction Single [Single \\"T\\"] equal or unequal with access door including jointing with solvent cement complete all as specified and as directed.
98S&F PVC (SWR) bends with access door 110mm dia
99S&F PVC (SWR) P trap complete all as specified and directed.
100S&F PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement and in cement concrete 1:2:4 type B1 all as specified and directed.
101S & F in repairs 75mm dia out let, PVC (SWR) Floor Trap with SS grating including jointing to waste pipe fixed with solvent cement complete all as specified and as directed.
102M&L for taking down carefully existing aluminium point wiring (light, fan, socket or power) complete fittings fixture such as switches Ceiling roses, pendents,regulators, sockets etc to be measured separately)unscrewing from Board/outlet boxes, fittings & fixtures such as switches, sockets, ceiling rose lamp holder tube/ceiling fitting, bulk head fittings, tube lights & regulator etc and making good disturbed surfaces of walls, floors etc. complete all as specified and as directed.
103M&L for taking down carefully existing old DBs and making good disturbed surfaces of walls to match the existing surfaces complete all as specified and as directed
104M&L for taking down unserviceable submain wiring alongwith batten/PVC/steel conduits etc and making good disturbed surfaces of walls/ floors to match the existing surfaces all as specified and as directed. Please Enable Macros to View BoQ information
105M&L for taking down unserviceable submain wiring alongwith batten/PVC/steel conduits etc and making good disturbed surfaces of walls/ floors to match the existing surfaces all as specified and as directed. Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58543131
AUTHORITY Statutory Bodies & Commissions/Committees
TENDER VALUE 47.50 Lakhs
LAST DATE 07-12-2026
Authority
Authority Name Military Engineer Services
Work Description Tender for Addn / Altn Of Administrative Building (P-01) At Hq 34 Weu And Three Minor Works Under Ge Minniebay, Sri Vijaya Puram (8897/E8)
Basic Detail
Tender No 8897/E8
Bidding Type Tender
Location
City South Andamans
State Andaman And Nicobar Islands
Key Dates
Publish Date 16 Nov 2026
Submission Date 07 Dec 2026
Open Date 09 Dec 2026
Finance
Tender Value 47.50 Lakhs
Tender Fee 500
EMD 95000
Exemption Available
Document List
30818931-ed87-40e6-a6a5-26c8108856bb.html
8897TENDER.pdf
BOQ_896209.xls
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 16, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Dec 07, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 16 days
Dec 09, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 18 days

Tender Documents

Download All (ZIP) ↓
html

30818931-ed87-40e6-a6a5-26c8108856bb.html

pdf

8897TENDER.pdf

xls

BOQ_896209.xls

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender