Tender For Special Repair To Boundary Wall And Fencing From Shaurya Gate To P-91 installation Utkrosh And One Revenue & Two Minor Works Under Ge Minniebay, Sri Vijaya Puram (8896/E8)
Tender Value
38.50 Lakhs
Estimated cost
Bid Submission
07 Dec 2026
16 days left
EMD
77000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
South Andamans → Andaman And Nicobar Islands
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Special Repair To Boundary Wall And Fencing From Shaurya Gate To P-91 installation Utkrosh And One Revenue & Two Minor Works Under Ge Minniebay, Sri Vijaya Puram (8896/E8)
BOQ
| Sl. No. | Item Description |
| 1 | SPL REPAIR TO BOUNDARY WALLDemolition of Brick/ Block work built in cement mortar complete all as specified and directed. |
| 2 | Taking down cement plaster of any description on brick or concrete surfaces etc including racking out joints, hacking for key, scrubbing down with water etc., complete all as specified and directed. |
| 3 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed. |
| 4 | M&L Precast cement concrete block masonry type C1 1:3:6 (20mm graded agg) with solid block exc 10cm in width and setting in CM 1:6 complete all as specified and directed. |
| 5 | M & L rendering 15mm thick in CM 1:4 on other than fair face of brick work surfaces to be finished fair and even smooth without using extra cement complete all as specified and as directed. |
| 6 | M&L Preparation of newly plastered surfaces of wall & applying Two or more coatsof 100% Premium acrylic emulsion paint havingVOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance,dirt resistance exterior paint of required shade(Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces over a coat of putty complete all as specified and directed. |
| 7 | M&L PCC in foundations, filling and mass-concrete type D2 (1:4:8) using 40 mm graded stone aggregate complete all as specified and directed. |
| 8 | Demolition of reinforced cement concrete (reinforcement cut as required to facilitate demolition) of any description and in any position not otherwise specifically provided for complete all as specified and directed. |
| 9 | M & L RCC M-30 (Nominal mix) as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and as directed. |
| 10 | M&L for Nominal mix RCC M-30 (using 20mm graded stone aggregate) in Columns, pillars, piers, post & struts complete all as specified and directed |
| 11 | M&L for Nominal mix RCC M-30 (using 20mm graded stone aggregate) in beams, cantilevers, bressummers, lintels over 1.5mtr span complete all as specified and directed |
| 12 | Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter with rough finished surface flat complete all as specified and as directed. |
| 13 | M&L for formwork to sides and soffits of floor or roof beams, beam haunchings, griders, bressummers, lintels incluing supports, overhangs, cantilivers, shelves etc., also splays between floors and beams complete all as specified and directed. |
| 14 | M&L for use and waste form work to pillars, posts, struts, piers, columns and stanchions and like for flat rough finishesd surface complete all as specified and directed. |
| 15 | M&L PCC 1:2:4 type B1, using 20 mm graded aggregate as in coping etc., including necessary formwork complete all as specified and as directed. |
| 16 | S&F Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified. |
| 17 | S&F for mild steel works as in posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe 290 Gde E-165 complete all as specified and directed. |
| 18 | M&L Painting two coats of synthetic enamel paint over a coat of red oxide including preparation of new steel surfaces of any description over 10cm in width or girth not other wise described complete all as specified and directed. |
| 19 | S&F in repair for Galvanised, 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. complete all as specified and directed. Note :- Each line wire to be measured |
| 20 | S&F for punch tape concertina coil of 610mm dia openable/stretchable to 6.0 meter round type, 51 spirals, core wire, high tensile spring steel wire galvanised as specified in IS-4454 including necessary wire for fixing coil on security / compound wall Y shape MS angle complete all as specified and directed. |
| 21 | S&F TMT steel bars 10mm dia and over as reinforcement cut to length, bent to shape required including cranking, bending, spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia complete all as specified and as directed. |
| 22 | M&L for TMT steel bars 5mm dia and over upto and including 10mm dia in stirrups spaces and binder cut to length, bent to shape required including cranking, bending, spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia complete all as specified and as directed. |
| 23 | Dismantling posts or struts(wood, steel or R.C.C.) any section, including taking out embedded portion, embedded in concrete, brickwork or masory etc and making good disturbed ground all as directed. |
| 24 | Dismantling of Mild Steel Work of any description not otherwise provided for complete all as specified and as directed. |
| 25 | Dismantling fencing wire mesh any type complete all as specified and directed. |
| 26 | Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in & raming earth/ broken rubble mixed with earth around, in layers n. exc. 25cm, watering, & removing surplus soil to a distance n exc 50m & making good surface in soft/loose soil complete all as specified and directed. |
| 27 | M&L PCC in foundations, filling and mass-concrete type D2 (1:4:8) using 40 mm graded stone aggregate complete all as specified and directed. |
| 28 | S&F to fencing post including cutting tops to shape as directed, drilling holes,notching for wire, etc., flat iron fillets (for securing wire mesh etc.,) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed. |
| 29 | M&L PVC coated GI chain link fencing 3.5mm dia with 50mm x 50mm mesh including fixing of MS line wire / rod, flat iron & machine made hexagonal or square head bolts to fencing posts complete all as specified.Note : MS rod and MS bolts will be measured and paid seperately as supplied only |
| 30 | Supply only mild steel screw bolts n exc 12 mm dia machine made with hexagonal or square head at one end and screwed the other or screwed both ends for fixing of chain link fencing complete all as specified and directed. |
| 31 | Preparing new steel or iron surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. |
| 32 | Material & Labour in repair for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement complete all as specified and directed. |
| 33 | WATER LINE AND COVERCutting holes in brick walls or in concrete wall exc half brick but n.exc one brick and built in cement mortar and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 as required complete all as specified and directed. |
| 34 | M & L Joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated with grade Fe 410 -W (Gde-E- 250) quality- A complete all as specified and as directed. |
| 35 | M & L expanded metal, n.exc 4 Kg cut to length, bent to shape required and tying with and including annealed mild steel wire not less than 0.9mm dia or fixing with galvanised steel staples supplied and fixed complete to wood or steel members complete all as specified. |
| 36 | Surface excavation not exceeding 30cm deep and averaging 15cm deep and getting out in soft/loose of soil, all as specified. |
| 37 | M & L cement concrete with type C2 (40 mm graded stone aggregate) 75 mm thick as in plinth protection/hardstanding complete all as specified and as directed. |
| 38 | M&L for 100mm thick cement concrete 1:4:8 type D2 using 40mm graded stone aggregate in sub base in floors and paving ,laid in panels and finished even & fair compete. |
| 39 | M&L 60mm thick factory made colored mixed with grey cement and pigment precast concrete interlocking paver block confirming to IS 15658-2006 manufactured by vibratory process laid over sand cushioning complete all as specified & directed. |
| 40 | M&L for sand filling under floors, cushning under interlocking tiles or in foundations incl watering and consolidations complete all as specified and directed. |
| 41 | Removing excavated material n exc 50 m and depositing where directed at a level n exc 1.5m above the starting point complete all as specified and directed. |
| 42 | Excavation in trenches not exc 1.5 meter wide & not exc 1.5 mtr in depth: for foundationetc or for manholes, laying of pipe in any type of soil and getting out complete all as specified |
| 43 | Returning filling in, including spreading, leveling watering & well rammng in layers not exc 25cm thick complete all as specified and directed by Engineer-in-Charge |
| 44 | Removing excavated material to a distance not exc 50 mtr & depositing where directed at a level not exc 1.5 mtr above the starting point complete all as specified & directed |
| 45 | S&F tubes medium grade of 50mm dia galvanized with all fittings laid in trenches/fixed on wall/on roof etc complete all as specified and directed. |
| 46 | S&F tubes medium grade of 100mm dia galvanized with all fittings laid in trenches/fixed on wall/on roof etc complete all as specified and directed. |
| 47 | Supply and fixing Gun Metal, globe or gate valves with iron wheel head, screwed both ends for iron pipe fixed of 50mm bore complete all as specified and directed. |
| 48 | Supply and fix cast iron sluice valve ISI marked class PN 1.6 heavy duty ISI marked both ends flanged, suitable for 100 mm bore conforming to IS 14846 of 2000 duly with wheel operated handle with high tensile stainless steel spindle including nuts, bolts, washers etc of required size complete all as specified and as directed by Engineer-in-Charge. |
| 49 | M & L for construction of valve chamber of internal size 900x900x900 mm with block masonry in cement mortar 1:6 , with Plain Cement Concrete (Nominal mix) 1:3:6 type C2 sub base plaster internally and exposed external surface in cement mortar 1:4 (15 mm thick and provision of valve chamber cover made out of MS sheet 3.15 mm thick welded to angle iron frame 40 x 40 x 5 mm made out to double / single door type with hinges and providing proper locking arrangement duly painted with two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and all as directed by Engr-in-Charge. |
| 50 | Supply and fix flanged Non return valve flap type, 100 mm dia cast iron body, PN1.6,confirming with IS provision of 3mm thick rubber gasket on both sides of the flanges, bolts and nuts complete all as directed . |
| 51 | M & L for cement concrete type C2, 1:3:6 using 40mm grade stone aggregate as in foundation concrete etc all as specified and as directed by engineer in charge |
| 52 | M&L for cutting of Road/Hard standing for laying of pipe line upto 100 mm bore dia including making good patch work by cement concrete type B1 1:2:4 using 40mm graded stone aggregate 150mm thick and finishing the surface with CM 1:2, 15mm thick all as specified and as directed by Engineer-in-Charge. |
| 53 | M & L for cutting existing GI pipe line of dia upto 100 mm bore and making connection for new GI pipe as required suitable dia of pipe as on site, inluding necessary connections, fittings complete all as specified and as directed by Engineer in charge. |
| 54 | COMPACTORFile compactor push and full type single bay (height 2180mm, width 915mm) (SS1-1, SL 1-1, TM 1-2). Make :- Godrej / Methodex / Geeken |
| 55 | STAINLESS STEEL BENCHSurface dressing not exceeding 15 cm deep and geting out in hard/dense soil |
| 56 | Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in & raming earth/ broken rubble mixed with earth around, in layers n. exc. 25cm, watering, & removing surplus soil to a distance n exc 50m & making good surface in soft/loose soil. |
| 57 | M&L PCC in foundations, filling and mass-concrete type D2 (1:4:8) using 40 mm graded stone aggregate all as specified. |
| 58 | Material & Labour for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement. |
| 59 | M&L for 100 mm thick Cement concrete type D2, 1:4:8 (using 40 mm graded stone aggregate) in sub base of flooring/ hard standing.finishing the surface even & smoth without using extra cement all as directed. (to receive chequered tile ) |
| 60 | Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand; |
| 61 | M&L for providing cement concrete type B-1, 1:2:4 (using 12.5mm graded aggregate) as in coping, benching, and similar works slightly rounded or chamfered angles and throating including necessary form work etc., complete all as specified and as directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 16, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedDec 07, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 16 daysDec 09, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 18 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender