Tender For Supply Of Material For Participation In Western Railway Tender For Design Supply Installation Testing And Commissioning Of Provision Of 4X48 Ofc Backbone For Kavach Lte In Remaining Balance Sections Of Vadodara Division Western Railway
Tender Overview
Project Description
Tender for Supply Of Material For Participation In Western Railway Tender For Design Supply Installation Testing And Commissioning Of Provision Of 4X48 Ofc Backbone For Kavach Lte In Remaining Balance Sections Of Vadodara Division Western Railway , S.No. Item Code Item Qty Qty Unit Unit Rate Basic Value Escl.(%) Amount Bidding Unit (Above/ Below /At Par) Schedule () A-Supply Only Items (Telecom) 297349511.85 0.1 267614560.66500002 Below , 1 Description:- Supply Of Hdpe Duct 40/33 Mm As Per Rdso Specification No. Rdso / Spn / Tc / 45 / 2013 Rev.2 Amd.2 Or Latest For Each Kilometer Of Duct Following Items Are To Be Supplied A) End Plugs-2 Nos. B) Cable Sealing Plugs -2 Nos. C) Plastic Coupler- Slip Fit/Push Fit Type-2 Nos D) End Plugs To Be Provided Along With Each Drum-2 No , 2 Description:- Supply Of Fiber Splice Straight Joint Enclosure (Sjc) Complete With All Accessories As Per Latest Specs For 48 Fiber Ofc Cable With Latest Amendment. , 3 Description:- Supply Of Fiber Distribution Management System (Fdms) For 48F Ofc Cable For Termination Of Ofc Cable Comingfrom Both Side As Per Rdso Specn. No.Rdso/ Spn/Tc/37/2000 (Ver.3) Amdt.1) , 4 Description:- Supply Of Ms Angle For Preparation Of J Type Clamp, 25Mm Dia Ms Nut And Bolts (02 Nos.) With Water Sealed Arrangement For Fixing Prepared J Type Clamp With Ballast Retainer Wall And Hot Dip Galvanizing Of Same For Carrying Out Of 24 Fibers Ofc/Hdpe/Gi Pipe (Dia 100 Mm) On Major Bridges , 5 Description:- Supply Of Ms Plate For Preparation Of J Type Clamp, 25Mm Dia Ms Nut And Bolts (02 Nos.) With Water Sealed Arrangement For Fixing Prepared J Type Clamp With Ballast Retainer Wall And Hot Dip Galvanizing Of Same Of Same For Carrying Out Of 24 Fibers Ofc/Hdpe/Gi Pipe (Dia 100 Mm) On Minor Bridges. , 6 Description:- Supply Of 24 Port Gigabit Smart Managed Poe+ Layer-2 Switch, 24X1g Poe+ Ports @384W; 4X10gb Sfp+ Slots As Uplink Ports And As Per Specification. , 7 Description:- Supply Of Sc-Apc Ofc Patch Cord As Per Rdso Specification No. Rdso/Spn/Tc/69/2007 Rev.0 Or Latest. Length Of The Patch Cord Should Be 10 Mtr. , 8.0 Description:- Supply Of Otdr Suitable For 1310/1550Nm Fiber As Per Specification. , 9.0 Description:- Supply Of In-Built Gnss Based Cable Route Tracer With 10W, 500 Ma, 85V Transmitter Suitable For Detecting & Mapping Underground Cables With Accuracy Which Can Up To 3-5 Cm Or Better, With Current Direction Up/Down Arrows, Remote Calibration Check Feature. Supply Shall Include Inbuilt Rtk Enabled Receiver, Transmitter, Compatible Dual Bluetooth Android Phone With Rtk Mobile Application Pre-Installed In Android Device Along With Minimum 5 Years Subscription, Compatible With Ntrip And Rtcmv3.X Messaging Standards And Holder & Standard Accessories. Make/Model: Radio Detection Rd8200gs Or Similar. , 10.0 Description:- Supply Of Optical Laser Torch As Per Specification. , 11.0 Description:- Supply Of Ber Meter/ Digital Spectrum Analyzer As Per Specification. , 12.0 Description:- Supply Of 230V Ac/48V Dc 50 annual periodical maintenance With 25A (2+1) Smps Based Power Plant Battery Charger For Vrla Batteries As Per Rdso Spec No. Rdso/Spn/Tl/23/99 (Ver. 4.0) With Latest Amdt. , 13.0 Description:- Supply Of 48V/200Ah Vrla Maintenance Free Battery Set Conferming To Rdso Specification No. Irs: S: 93 /96 (A) With Admnt. -1 Or Latest. , 14.0 Description:- Supply Of Automatic Fusion Splicing Machine (Single Fiber Fusion Type) Conforming To Tec Specification No.Tec/Gr/Tx/Osm/-001/04/Sep-12 Or Latest With Accessories Such As Battery Pack, Battery Charger, Power Cable, Space Electrodes, Carrying Case, High Precision Cleaver And Fiber Optic Stripper. Accepted Make:Yokogawa/ Fujitsu/ Jdsu/Fetel , 15.0 Description:- Ferrule And Label Printer Similar To Brother Model No. Pt E850tkw With Extra 5 Nos Of Tap Cartridge With 30 Months Warranty. , 16.0 Description:- Supply Of Tool & Testing For Ofc Cable (Ofc Power Meter 1310/1550 Nm & Ofc Power Source/Generator 650/1310/1550 Nm) With Tool Box As Per Technical Specification. , 17.0 Description:- Supply Of Ofc Maintenance Tool Kit As Per Tec Spec No-G/Oms/01/01 April 94 Or Latest. One Set Consisting Of Following 1) Digital Multimeter 4-1/2 Digit With Lcd Display 1 No. Philips/Flike/Motwani. 2) Rotary Duct Cutter For Cutting Ducts (With Replaceble Blade) 2Nos. 3) Utility Knife 1No. 4) Cable Slitter 1No. 5) Tubing Cutter For Cable Armour 1 No 6) Bare Fibre Adaptor 1No. 7) Miller High Precision Stripper For Fibre Buffer-2No 8) Pocket Cleaver 1Nos 9) Mechanical Splice Joint Set (1 Set Consisting Of 6 Nos.) 10) Ceramic Scissor Csi 1No. 11) Fc/Pc Adopter With Odb Loss- 10Nos 12) Optical Fibre Terminal V Groove- 2Nos 13) Earth Resistance Measuring Instruments With All Accessories Range 0.1 To 10 Ohm. 14) Megger 500V-1No, 100V-1No. 15) Loose Tube Stripper-1No. 16) Cord Stripping Plier-1No. 17) Krone Tool - 1 No , 18.0 Description:- Supply Of Revolving Office Chair As Per Specification. , 19.0 Description:- Supply Of Office Table As Per Specification. , 20.0 Description:- Supply Of Steel Plain Almirah With 4 Adjustable Shelves As Per Specification. , 21.0 Description:- Ss Location Box Made Of special Grade Ss 304 Of Size As Per Drg. No. Drm/Sg/948 Dt. 26.04.2011 (Single App. Case) Or Latest. Manufacturers Certificate In Regard To Grade Of Stainless Steel And Its Protection Level Shall Be Submitted At The Time Of Supply. , 22.0 Description:- Supply Of 19 Covered Racks, Veropresident /Rittel Or Similar Makehaving Size Of Approximately 2.2 Mtr.(42U) Height X 600Mm Width X800mm Depth And Duly Approved By The Engineer In Charge Of The Work.The Rack Shall Be Suitable For All Fittings For Housing Sdh Equipment,Primary Muxes, Ddf, Mdf Using Kronemodule And Other Equipment Like Runway Ladders Etc. Completely Wired And Equipped With Integrated Protection Modules For All Channels As Per Technical Specifications And Other Stipulations Of Tender Document. It Should Be Possible To Lock All The Equipment With Only Order Wire Telephone Remaining Outside The Rack As Per Railway Requirement Errection Ofrach Including Transportation Should Be Done By Contractor. With Ladder Up To 10 Mtr As Specification. Before Supply Approved By Railway , 23 Description:- Supply Of Half Round Reinforced Cement Concrete Pipes & Collars Of 300 Mmouter Dia & 250 Mm Internal Dia (1 Meter Long) Along With Collars With Material Strength As Per Is No. 458/2003 Of Nptype , 24 Description:- Supply Of Fiber Optical Joint Termination Enclosure Box For 6 Core Ofc
BOQ
| Sl. No. | Item Description |
| 1 | S.No. Item Code Item Qty Qty Unit Unit Rate Basic Value Escl.(%) Amount Bidding Unit (Above/ Below /At Par) Schedule () A-Supply only Items (Telecom) 297349511.85 0.1 267614560.66500002 Below |
| 2 | 1 Description:- Supply of HDPE Duct 40/33 mm as per RDSO Specification No. RDSO / SPN / TC / 45 / 2013 Rev.2 Amd.2 or latest for each Kilometer of duct following items are to be supplied A) End plugs-2 Nos. B) Cable sealing plugs -2 Nos. C) Plastic Coupler- Slip fit/push fit type-2 Nos D) End plugs to be provided along with each drum-2 No |
| 3 | 2 Description:- Supply of fiber splice straight joint enclosure (SJC) complete with all accessories as per latest specs for 48 fiber OFC cable with latest amendment. |
| 4 | 3 Description:- Supply of Fiber Distribution Management System (FDMS) for 48F OFC Cable for termination of OFC Cable comingfrom both side as per RDSO Specn. No.RDSO/ SPN/TC/37/2000 (Ver.3) Amdt.1) |
| 5 | 4 Description:- Supply of MS Angle for preparation of J type clamp, 25mm dia MS nut and bolts (02 nos.) with water sealed arrangement for fixing prepared J type clamp with ballast retainer wall and hot dip galvanizing of same for carrying out of 24 fibers OFC/HDPE/GI Pipe (dia 100 mm) on Major Bridges |
| 6 | 5 Description:- Supply of MS Plate for preparation of J type clamp, 25mm dia MS nut and bolts (02 nos.) with water sealed arrangement for fixing prepared J type clamp with ballast retainer wall and hot dip galvanizing of same of same for carrying out of 24 fibers OFC/HDPE/GI Pipe (dia 100 mm) on Minor Bridges. |
| 7 | 6 Description:- Supply of 24 Port Gigabit Smart Managed POE+ Layer-2 switch, 24x1G POE+ ports @384W; 4x10Gb SFP+ slots as Uplink ports and as per specification. |
| 8 | 7 Description:- Supply of SC-APC OFC patch cord as per RDSO specification no. RDSO/SPN/TC/69/2007 Rev.0 or latest. Length of the Patch cord should be 10 mtr. |
| 9 | 8.0 Description:- Supply of OTDR suitable for 1310/1550nm fiber as per specification. |
| 10 | 9.0 Description:- Supply of in-built GNSS based cable route tracer with 10W, 500 mA, 85V transmitter suitable for detecting & mapping underground cables with accuracy which can up to 3-5 cm or better, with current direction up/down arrows, Remote calibration check feature. Supply shall include inbuilt RTK enabled receiver, transmitter, compatible dual Bluetooth android phone with RTK mobile application pre-installed in android device along with minimum 5 years subscription, compatible with NTRIP and RTCMv3.X messaging standards and holder & standard accessories. Make/Model: Radio detection RD8200GS or similar. |
| 11 | 10.0 Description:- Supply of Optical Laser Torch as per specification. |
| 12 | 11.0 Description:- Supply of BER Meter/ Digital Spectrum Analyzer as per specification. |
| 13 | 12.0 Description:- Supply of 230V AC/48V DC 50 Amp with 25A (2+1) SMPS based power plant battery charger for VRLA batteries as per RDSO spec No. RDSO/SPN/TL/23/99 (ver. 4.0) with latest amdt. |
| 14 | 13.0 Description:- Supply of 48V/200Ah VRLA maintenance free battery set conferming to RDSO specification no. IRS: S: 93 /96 (A) with admnt. -1 or latest. |
| 15 | 14.0 Description:- Supply of Automatic Fusion Splicing Machine (Single Fiber Fusion Type) conforming to TEC specification No.TEC/GR/TX/OSM/-001/04/SEP-12 or latest with accessories such as battery pack, battery charger, power cable, space electrodes, carrying case, high precision cleaver and Fiber Optic stripper. Accepted Make:Yokogawa/ Fujitsu/ JDSU/Fetel |
| 16 | 15.0 Description:- Ferrule And Label Printer similar to Brother model No. PT E850TKW with Extra 5 nos of Tap cartridge with 30 months warranty. |
| 17 | 16.0 Description:- Supply of Tool & Testing for OFC Cable (OFC power meter 1310/1550 nm & OFC power source/generator 650/1310/1550 nm) with tool box as per technical specification. |
| 18 | 17.0 Description:- Supply of OFC Maintenance tool kit as per TEC Spec No-G/OMS/01/01 April 94 or latest. One set consisting of following 1) Digital Multimeter 4-1/2 digit with LCD display 1 No. Philips/Flike/Motwani. 2) Rotary duct cutter for cutting ducts (with replaceble blade) 2Nos. 3) Utility Knife 1No. 4) Cable slitter 1No. 5) Tubing cutter for cable armour 1 no 6) Bare fibre adaptor 1no. 7) Miller high precision stripper for fibre buffer-2no 8) Pocket cleaver 1nos 9) Mechanical splice joint set (1 set consisting of 6 nos.) 10) Ceramic scissor CSI 1No. 11) FC/PC adopter with ODB loss- 10Nos 12) Optical fibre terminal V groove- 2Nos 13) Earth resistance measuring instruments with allaccessories range 0.1 to 10 Ohm. 14) Megger 500V-1No, 100V-1No. 15) Loose tube stripper-1No. 16) Cord stripping plier-1No. 17) Krone Tool - 1 No |
| 19 | 18.0 Description:- Supply of Revolving Office Chair as per specification. |
| 20 | 19.0 Description:- Supply of Office Table as per specification. |
| 21 | 20.0 Description:- Supply of Steel Plain Almirah with 4 adjustable shelves as per specification. |
| 22 | 21.0 Description:- SS Location box made of Spl Grade SS 304 of size as per Drg. No. DRM/SG/948 dt. 26.04.2011 (Single app. Case) or latest. Manufacturer's certificate in regard to grade of stainless steel and its protection level shall be submitted at the time of supply. |
| 23 | 22.0 Description:- Supply of 19\\" covered racks, VeroPresident /Rittel or similar makehaving size of approximately 2.2 mtr.(42U) height X 600mm width x800mm depth and duly approved by the engineer in charge of the work.The rack shall be suitable for all fittings for housing SDH equipment,primary Muxes, DDF, MDF using kronemodule and other equipment like runway ladders etc. completely wired and equipped with integrated protection modules for all channels as per technical specifications and other stipulations of tender document. It should be possible to lock all the equipment with only order wire telephone remaining outside the rack as per railway requirementerrection ofrach including transportation should be done by contractor. with ladder up to 10 mtr as specification. Before supply approved by railway |
| 24 | 23 Description:- Supply of Half Round RCC pipes & collars of 300 mmouter dia & 250 mm internal dia (1 meter long) along with collars with material strength as per IS No. 458/2003 of Nptype |
| 25 | 24 Description:- Supply of Fiber Optical Joint Termination Enclosure Box for 6 core OFC |
AI Tender Summary
Tender Timeline
Tender Published
Tender notice published.
CompletedBid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 5 daysBid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender