Tender For Extension Of Multipurpose Hall Of Flc Campbell Bay To Accommodate A Store Room And Field Office With Repairing Of Doors Windows And Providing Security In Fish Landing Centre At Campbell Bay.
Tender Value
37.44 Lakhs
Estimated cost
Bid Submission
01 Dec 2026
13 days left
EMD
74900
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Nicobars → Andaman And Nicobar Islands
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Extension Of Multipurpose Hall Of Flc Campbell Bay To Accommodate A Store Room And Field Office With Repairing Of Doors Windows And Providing Security In Fish Landing Centre At Campbell Bay.
BOQ
| Sl. No. | Item Description |
| 1 | ANNEXURE IExtension of Multipurpose hall of FLC Campbell bay to accommodate a store room and field office with repairing of doors windows and providing security in Fish Landing Centre at Campbell Bay. |
| 2 | Cutting and removing grass and removal of the rubbish upto a distance of 50m outside the periphery of the area cleared and including cost of all labour charges, minor tools, GST & Labour cess etc complete. |
| 3 | Taking out old doors/ windows /ventilators (steel or wood) and shutters including disposing of old/damaged materials as per the direction of EIC including cost of all labour charges, transportation charges and stock in store/godown, minor tools, GST etc., complete. |
| 4 | Providing and fixing anodised aluminium (anodised transparent or dyed to required shade according to IS 1868 minimum anodic coating of grade AC 15) work for doors,windows, ventilators and partitions (swinging type/fixed type) with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make confirming to IS : 733 and IS : 1285, fixed with rawl plugs and screws or with fixing clips or with expansion fold fasteners including necessary filling up of gaps at junctions at top,bottom and sides with required EPDM rubber/Neoprene gasket etc., and the aluminium sections shall be smooth,rust free,straight,mittred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/panelling,C.P. brass/stainless steel screws,all complete as per the direction of EIC., including cost of all materials required for this work,all transportation charges to work site,labour charges,minor tools and plants etc., complete. |
| 5 | Providing and fixing 12mm thick pre-laminated three layer medium density (exterior grade) particle board Grade-I. Type-II conforming to IS.12823 bonded with phenol formaldyde synthetic resin of approved brand and manufacture in panelling fixed in aluminium doors, windows shutters & partition frames with C.P. brass/ stainless steel screw etc complete as per directions of engineer-in-charge, including cost of all materials, all labour charges, transportation charges, scaffolding charges, minor tools, GST, labour welfare cess etc., complete. Prelaminated particle board with decorative finish on both side. |
| 6 | Providing and fixing glazing in aluminum door, window, ventilator, Shutter and partition with PVC Neoprene gasket etc., complete as per the architectural drawing and the direction of EIC with glass pan of 4 mm thickness (weight not less than 10 Kg/sqm) (Cost of aluminum snap bending shall pe paid in basic item ) all labour Charges , Transportation charges , scaffolding charges minor tools , GST Labours welfare cess etc., complete. |
| 7 | Providing and fixing Al. grills of required pattern in frames of windows/ventilators madeout of M.S Flats, Square or round bars etc.,with one coat of steel primer as directed by the EIC including cost of steel items, welding materials, hire charges of welding machine, cost of steel primer,fitting charges, all labour charges, transportation charges, cost of grill, minor tools, GST etc., complete |
| 8 | Providing and fixing Aluminium tower bolt Size 200x10mm ISI marked anodised (AC10 as per IS 1868) transparent or dyed to required colour or shape with nuts and screws including cost of all labour charges, minor tools, Labour welfare cess, GST etc., complete. |
| 9 | Providing and fixing Aluminium Push/Pull Handle 150mm ISI marked anodised (AC10 as per IS 1868) transparent or dyed to required colour or shape with nuts and screws including cost of all labour charges, minor tools, Labour welfare cess, GST etc, complete. |
| 10 | Providing and fixing of Sliding Door Bolt made out of anodised Aluminium of ISI marked (AC10 as per IS 1868) of size 300 x16 mm transparent or dyed to required colour or shade with nuts and screws etc.including cost of all materials, transportation of all materials to work site, cost of all labour charges, minor tools, GST etc, complete. |
| 11 | Dismantling tile work in floors/walls and roofs laid in cement mortar including stacking material, Including labour charges, Labour welfare cess, GST and minor tools etc., complete within 50 metres lead.a) For thickness of tiles 10 mm to 25 mm |
| 12 | Providing and laying vitrified floor tiles of 12mm thickness of size 400x400 mm as specified by the manufacturer and confirming to IS 13753 of approved make like Nitco, Orient, Somany, in all colours and shades as approved by the EIC laid on 20 mm thick cement mortar 1:4 (1 cement : 4 main land Coarse river sand) including grouting the joints with white cement and matching pigments including cost of tiles of approved brand as directed by the EIC, all labour charges, transportation cost of all materials to work site, minor tools and plants, GST etc\., complete. |
| 13 | Providing and laying Ist quality ceramic glazed wall tiles confirming to IS: 15622 (thickness to be specified by the manufacture) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-charge in skirting, risers of steps and dados over 12 mm thick bed of Cement Mortar 1:3 (1 cement:3 coarse sand) and jointing with gray cement slurry @ 3.3 kg per sqm including pointing in cement mixed with pigment of matching shade GST etc., complete. |
| 14 | Repairs to Plastering of 12mm thick cement plaster of cement morter mix 1:4 (1 cement, 4 Mainland river sand) in single coat including finishing even and smooth and curing as directed by the EIC but including cost of Chipping & Scrapping in old plasters in walls, Mainland river sand (fine or coarse sand as per requirement), screening of sand, mixing of morter, conveying, transportation cost of all materials to work site, scaffolding, all labour charges, moinor tools & plants required for this work GST etc., complete. |
| 15 | Distempering with 1st quantity acrylic distemper (ready mix) having voc content less than 50 grams/ liter of approved brand and manufacture to give and even shade as per the direction of EIC including cost of paint , brush other materials , all labour charges , GST , labour welfare cess minor tools etc., complete. Old Work (One or More coats) |
| 16 | Painting and finishing with antifungal paint (two or more coats) of approved brand and manufacture of required colour on under texture to give an evan shade at all locations prepared and applied as per manufacturer's specifications including appropriate priming coat, preparation of surface including cleaning of the existing painted surface, including cost of primer, antifungal paint, brushes, putty, sand paper, scaffolding and other materials required for this work, transportation charges of all materials to work site, all labour charges for cleaning the surface and painting over the cleaned surface, minor tools, GST etc., complete. |
| 17 | Providing and fixing of PVC pipe (110mm) line fitting in the sanitary line, including cost of PVC pipe, cutting and making good the wall and floors wherever required and in fixing in required level, trenching and refilling, scaffoldings, testing as directed by the EIC, cost of all labour charges, transportation charges of all materials to worksite, cost of minor tools, GST etc., complete. |
| 18 | Providing and fixing G.I. pipes complete with G.I. fittings and clamps,including cutting and making good the walls, GST etc., complete. (internal work) Exposed on wall 20mm dia. nominal bore |
| 19 | Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling, GST etc., complete. (external work) 20mm dia. nominal bore . |
| 20 | Providing and fixing brass bib cock of approved quality. 20 mm nominal bore, GST etc., complete. |
| 21 | Providing and fixing brass gate valve with CI wheel of approved quality (screwed end)25 mm nominal bore, GST etc., complete. |
| 22 | Making plinth protection 75 mm thick of cement concrete 1:3:6 (1 cement, 3 Pulverised sand, 6 graded stone aggregate 40 mm nominal size) including finishing the top smooth & finished with neat cement @ 9.76 kgs per 10.00 Sqm finished over the 1:4 cement plaster 12mm thick.(1Cement, 4 Mainland river Sand) including cost of pulverized stone sand, stone metal, main land river sand, mixing, conveying, placing, consolidation, screening and washing of stones chips and sand, including transportation charges of all materials to work site, hire charges and running charges of mixer machine, vibrator and all other equipments, all labour charges, cost of minor tools GST etc. complete. |
| 23 | Providing and fixing 20 cm thick masonary with Hollow Block of size 0.40 x 0.20 x 0.20 Mtrs cast with cement concrete 1:3:6 (1 cement three quarry dust and six 11.2mm stone chips) including curing, fixing with cement mortar 1:4 (one cement & four crushed sand) in walls including cost of crushed stone sand and stone aggregate, all labour charges for making hollow blocks, curing, conveying and fixing the same in wall, cost of wooden pallets, hire charges of hollow block making machine, transportation charges of all materials to work site, scaffolding charges, cost of minor tools etc complete. |
| 24 | Structural steel work 5mm thick welded in built up sections, trusses and framed work including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all GST etc., complete. |
| 25 | Painting with Epoxy paint of approved brand and manufacture in all shades to give an even shade on new steel work (Two coat) including cost of paint, brush, cost of other materials, scaffolding arrangements, labour charges, transportation charges of all materials to work site and cost of minor tools etc complete. |
| 26 | Providing and laying R.C.C 1:1.5:3 with 20mm size stone chips (one cement one crushed stone sand, & four stone chips of size 2cm graded) in all RCC works as directed by the EIC, cost of fabrication charges of steel reinforcement, centering & shuttering charges which will be paid seperately, but including cost of stone chips and sand, screening and washing of both the aggregates, mixing concrete, conveying the concrete, placing in position, consolidation with vibrator curing, all labour charges, transportation charges of all materials to work site, cost of minor tools, hire charges of mixer machine and vibrator, GST etc., complete . |
| 27 | Providing and fixing Tor steel reinforcement for R.C.C. work including cutting, bending, binding, and placing in position cost of binding wire, minor tools etc. complete. |
| 28 | Providing form work including centering & shuttering so as to give a rough finish, strutting and propping etc. and removal of the same from reinfored cement concrete and plain concrete work as directed by the Engineer In Charge, including cost of centering and shuttering, all labour charges, cost of binding materials, cost of transportation charges of all materials to work site, cost of ballies, cost of minor tools etc. complete. |
| 29 | Providing round the clock security guard without gun for watch & ward of government premises and its all belongings by deploying healty dresses security guards in 8 hours shift including neccesary T&P like torch,lathi and uniform etc., complete. As per the direction of Engineeer in charge(one job means 8 hours duty),cost of all labour charges, torch light,batteries, all minor tools, labour cess and GST etc.,complete. |
| 30 | ANNEXURE IIName of Work:- Repair & maintenace of Toilet Block in Fish landing center at Campbell bay |
| 31 | Cutting and removing grass and removal of the rubbish upto a distance of 50m outside the periphery of the area cleared and including cost of all labour charges, minor tools, GST & Labour cess etc complete. |
| 32 | Taking out old doors/ windows /ventilators (steel or wood) and shutters including disposing of old/damaged materials as per the direction of EIC including cost of all labour charges, transportation charges and stock in store/godown, minor tools, GST etc., complete. |
| 33 | Providing and fixing anodised aluminium (anodised transparent or dyed to required shade according to IS 1868 minimum anodic coating of grade AC 15) work for doors, windows, ventilators and partitions (swinging type/fixed type) with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make confirming to IS : 733 and IS : 1285, fixed with rawl plugs and screws or with fixing clips or with expansion fold fasteners including necessary filling up of gaps at junctions at top, bottom and sides with required EPDM rubber/Neoprene gasket etc., and the aluminium sections shall be smooth, rust free, straight, mittred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/panelling, C.P. brass/stainless steel screws, all complete as per the direction of EIC., including cost of all materials required for this work, all transportation charges to work site, labour charges, minor tools and plants etc., complete. |
| 34 | Providing and fixing 12mm thick pre-laminated three layer medium density (exterior grade) particle board Grade-I. Type-II conforming to IS.12823 bonded with phenol formaldyde synthetic resin of approved brand and manufacture in panelling fixed in aluminium doors, windows shutters & partition frames with C.P. brass/ stainless steel screw etc complete as per directions of engineer-in-charge, including cost of all materials, all labour charges, transportation charges, scaffolding charges, minor tools, GST, labour welfare cess etc., complete. Prelaminated particle board with decorative finish on both side. |
| 35 | Providing and fixing glazing in aluminum door, window, ventilator, Shutter and partition with PVC Neoprene gasket etc., complete as per the architectural drawing and the direction of EIC with glass pan of 4 mm thickness (weight not less than 10 Kg/sqm) (Cost of aluminum snap bending shall pe paid in basic item ) all labour Charges , Transportation charges , scaffolding charges minor tools , GST Labours welfare cess etc., complete. |
| 36 | Providing and fixing Aluminium tower bolt Size 200x10mm ISI marked anodised (AC10 as per IS 1868) transparent or dyed to required colour or shape with nuts and screws including cost of all labour charges, minor tools, Labour welfare cess, GST etc., complete. |
| 37 | Providing and fixing Aluminium Push/Pull Handle 150mm ISI marked anodised (AC10 as per IS 1868) transparent or dyed to required colour or shape with nuts and screws including cost of all labour charges, minor tools, Labour welfare cess, GST etc, complete. |
| 38 | Providing and fixing of Sliding Door Bolt made out of anodised Aluminium of ISI marked (AC10 as per IS 1868) of size 300 x16 mm transparent or dyed to required colour or shade with nuts and screws etc. including cost of all materials, transportation of all materials to work site, cost of all labour charges, minor tools, GST etc, complete. |
| 39 | Dismantling tile work in floors/walls and roofs laid in cement mortar including stacking material, Including labour charges, Labour welfare cess, GST and minor tools etc., complete within 50 metres lead.a) For thickness of tiles 10 mm to 25 mm |
| 40 | Providing and laying vitrified floor tiles of 12mm thickness of size 400x400 mm as specified by the manufacturer and confirming to IS 13753 of approved make like Nitco, Orient, Somany, in all colours and shades as approved by the EIC laid on 20 mm thick cement mortar 1:4 (1 cement : 4 main land Coarse river sand) including grouting the joints with white cement and matching pigments including cost of tiles of approved brand as directed by the EIC, all labour charges, transportation cost of all materials to work site, minor tools and plants, GST etc\., complete. |
| 41 | Providing and laying Ist quality ceramic glazed wall tiles confirming to IS: 15622 (thickness to be specified by the manufacture) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-charge in skirting, risers of steps and dados over 12 mm thick bed of Cement Mortar 1:3 (1 cement:3 coarse sand) and jointing with gray cement slurry @ 3.3 kg per sqm including pointing in cement mixed with pigment of matching shade GST etc., complete. |
| 42 | Repairs to Plastering of 12mm thick cement plaster of cement morter mix 1:4 (1 cement, 4 Mainland river sand) in single coat including finishing even and smooth and curing as directed by the EIC but including cost of Chipping & Scrapping in old plasters in walls, Mainland river sand (fine or coarse sand as per requirement), screening of sand, mixing of morter, conveying, transportation cost of all materials to work site, scaffolding, all labour charges, minor tools & plants required for this work GST etc., complete. |
| 43 | Distempering with 1st quality oil bound washable distember of approved manufacturer and of required shade and colour to give an even shade over the new work ( two or more coat) over a priming coat of cement primer at all locations prepared and applied as per manufacturer's specifications including appropriate priming coat, preparation of surface including cost of primer, oil bound washable distember, brushes, putty, sand paper, scaffolding and other materials required for this work, transportation charges of all materials to work site, labour charges, minor tools, GST etc. complete. |
| 44 | Painting and finishing with antifungal paint (two or more coats) of approved brand and manufacture of required colour on under texture to give an evan shade at all locations prepared and applied as per manufacturer's specifications including appropriate priming coat, preparation of surface including cleaning of the existing painted surface, including cost of primer, antifungal paint, brushes, putty, sand paper, scaffolding and other materials required for this work, transportation charges of all materials to work site, all labour charges for cleaning the surface and painting over the cleaned surface, minor tools, GST etc., complete. |
| 45 | Providing and fixing on wall face unplasticised, PVC (working pressure 4 kgf per sqcm) rain water pipes conforming to IS 4985 including jointing with seal ring conforming to IS 5382 leaving 10mm gap for thermal expansion. ( 110mm Dia) |
| 46 | Providing and fixing G.I. pipes complete with G.I. fittings and clamps, including cutting and making good the walls GST etc. (internal work) Exposed on wall 20mm dia. nominal bore |
| 47 | Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling GST etc., (external work) 20mm dia. nominal bore . |
| 48 | Providing and fixing brass bib cock of approved quality. 20 mm nominal bore, GST etc., complete. |
| 49 | Providing and fixing brass gate valve with CI wheel of approved quality (screwed end)50 mm nominal bore, GST etc., complete. |
| 50 | Making plinth protection 75 mm thick of cement concrete 1:3:6 (1 cement, 3 Pulverised sand, 6 graded stone aggregate 40 mm nominal size) including finishing the top smooth & finished with neat cement @ 9.76 kgs per 10.00 Sqm finished over the 1:4 cement plaster 12mm thick.(1Cement, 4 Mainland river Sand) including cost of pulverized stone sand, stone metal, main land river sand, mixing, conveying, placing, consolidation, screening and washing of stones chips and sand, including transportation charges of all materials to work site, hire charges and running charges of mixer machine, vibrator and all other equipments, all labour charges, cost of minor tools GST etc. complete. |
| 51 | Providing and fixing white vitreous china water closet squatting pan (Indian type W.C pan) with 100 mm sand cast iron P or S trap, 10 litre low level PVC flushing cistern (of approved make) with fittings C.I , MS brackets, 32 mm diameter flush pipe with fittings and clamps, overflow arrangement with specials and mosquito proof coupling of approved municipal design including painting of fittings and brackets, cutting and making good the walls and floors wherever required. (Long pan pattern W.C pan of size 580mm with flush pipe & overflow arrangement.) |
| 52 | Providing and fixing white vitreous china pedestal type water closet (European type W. C pan ) with seat and lid, CP brass hinges and rubber buffers, 10 liters low level PVC flushing cistern with fitting C.I ., MS brackets, 40 mm diameter flush pipe with fitting and Clamps, Overflow arrangement with specials and mosquito proof coupling of approved municipal design including painting of fitting and brackets, cutting and making good the walls and floors wherever required. |
| 53 | Providing and fixing white vitreous china wash basin (ISI Marked)with CI / MS brackets, 15 mm CP brass pillar taps, 32 mm CP brass waste of standard parttern, including painting of fittings and brackets, cutting and making good the walls wherever required.Flat back wash basin size 630x450 mm with a pair of 15 mm CP brass pillar taps. |
| 54 | Providing and fixing white vitreous china flat back of wall comes type lipped front urinal basin of 430 x 260 x 360 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with CI / MS brackets standard size of GI flush pipe and CP brass spreaders with brass unlons and GI clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required. One urinal basin with 5 litre PVC automatic flushing cistern. |
| 55 | Providing and fixing mirror of required shape and size with Stainless steel moulded frame of approved make and shade with 6 mm thick hard board backing.Rectangular shape 453 x 357 mm |
| 56 | Painting Two coat with approved Synthetic enamel paint on wood surface to give an even shade including cost of synthetic enamel paint, brush, cost of other materials, scaffolding arrangements, labour charges, transportation charges of all materials to work site and cost of minor tools etc complete. |
| 57 | Earthwork excavation in surface excavation not exceeding 30 cm in depth but exceeding 1.5 m in width as well as 10 sqm on plan including getting out and disposal of excavated earth up to 50 m and lift upto 1.5 m as directed by EIC including all labour charges, transportation charges, labour welfare cess, GST and minor tools etc., Complete. (All kinds of soil) |
| 58 | Providing and laying PCC specified grade 1:2:4 (one cement two mainland river sand and Four stone metal of 20mm size) for below footing, plinth beam, etc. as directed by the EIC, including cost of nominal centering & shuttering charges, cost of river sand, stone metal, screening & washing of both the aggregates, mixing, placing, curing, GST etc., complete. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 16, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedDec 01, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 13 daysDec 02, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 14 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender