Water Resources and Irrigation Government Departments Closing in 5 days TDR #58541659

Tender For Revival And Energisation Of Muguria-Iii T.W. Project Under N.Koili Block In Kataka District Under State-Plan 2026-27

Issued by Government Departments · Cuttack, Odisha
Tender Value
16.94 Lakhs
Estimated cost
Bid Submission
27 Nov 2026
5 days left
EMD
16949
Bank guarantee accepted
Document Fee
7080
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Cuttack → Odisha
EMD Exemption
Available
Quantity
Not Available

Project Description

Tender for Revival And Energisation Of Muguria-Iii T.W. Project Under N.Koili Block In Kataka District Under State-Plan 2026-27

BOQ

Name of Work:- REVIVAL AND ENERGISATION OF MUGURIA-III T.W. PROJECT UNDER N.KOILI BLOCK IN KATAKA DISTRICT UNDER STATE-PLAN 2026-27
Sl. No. Item Description
1Earth work in excavation of Foundation and plinth in hard soil including dressing and levelling of bed within initial lead of 50mtr.andlifi 1.5mtr etc complete as per the direction of the Engineer-in-charge.
2Excavation in hard soil such as Hard stiff clay, stiff black cotton, hard red earth, shales, moorum ordinary gravels, within 50m. Initial lead and 1.5m. Initial lift including rough dressing and breaking clods and stacking rubble or spreading and leveling within the site as the case may be etc; complete.asper direction of the Engineer-in-charge.(Mechanical 60% & Mannual 40%)
3Filling in foundation and plinth with sand including watering and ramming etc complete as per the direction of the Engineer-incharge.
4Cement concrite(1:4:8) with 4cm size h.g.b. crusser broken metal of approved quality from approved quarry with ramming watering and curring etc.complete including cost , taxes, royality convence charges of all materials to work site,supply of cement T&P required etc.comelete as per the direction of the Engineer-incharge.
5Cement concrite(1:2:4) with 12mm size black Crusher broken chips of approved quality from approved quarry with ramming watering and curring etc.complete including supply of all labours, cost.taxes,royality convence charges of all materials to work site,supply of cement T&P required etc.comelete as per the direction of the Engineer-incharge.
6Brick work with Fly Ash Brick 25cm x 12cm x 8cm size having croshing strength not less than 75 kg/cm2 with dimensional tolerrance± 2% in cement morter (1:6) in foundation and plinth etc. complete as per the Engineer-incharge.
712mm thick cement plaster in cement morter(1:6)finished smooth to brick work after racking out joints including watering and curring etc.complete including cost.taxes,royality convence charges of all materials to work site,supply of cement T&P required etc.comelete as per the direction of the Engineer-in-charge.
8Rigid smooth centering & shuttering for R.C.C. Works walls & fins including false work & dismateling them after 28 days of curing including cost of all materials complete as per direction of Egineer-In-Charge
9R.C.C. work in C.C.(1:2:4) including hoisting, laying & curing for 28 days with 12mm size black Crusher broken chips of approved quality from approved quarry with ramming watering and curring etc.complete including supply of all labours, cost.taxes,royality convence charges of all materials to work site,supply of cement T&P required etc.comelete as per the direction of the Engineer-incharge.
10Labour charge for M.S. reinforcement for R.C.C. work including cutting, bending & tying the grills & placing in position including cost of binding wire 18 to 20 gauge including cost of HYSD steel bar etc. complete.
11Cement punning over plastering including watering & curing with cost, taxes, royality & conveyance charges of all materials & supply of all materials & T& P etc complte as per direction of Engineer- in - charge.
12Filling in foundation and plinth with excavated materials including watering and ramming as directed by the Engineer-incharge.
13Filling in F&P with excavated materials including well watered and rammed.(2/3 of respective earth work)
14Writing charge of required information and data on both side of the transperancy pillar including supplying of approved paints and required material for writing etc. complete.
152.5cm A.S. flooring with C.C.(1:2:4) including punning with 12mm size chips.
16Cost of Single Pannel Door of size (1.0 mx2.0m) made out of M.S.Frame (35mmx35mmx5mm) with G.P.Sheet pannel of 1.20 mm thick and iron ventilator(size 0.45x0.30m) including fitting at site with all cost etc. complete as per direction of Engineer in charge.
17Colour washing two coats over 2 coats white washing with shell lime including cost of paint & labour etc complete.
18White wash 3 coats with shell lime
19Painting of red oxide primer for priming over iron work including cost of red oxide & labour etc complete.
20Painting two coats with enamel paint for priming over iron work including cost of paint & labour etc complete.
21Fitting of 160 mm outer dia High Density Polythylene Pipes of specified material grade & pressure rating by butt fusion welding method as per speciication & laying in tranches including testing & all cost etc fitting & fixing of required nos. of HDPE Teee for outlet & shaddle & G.I. raiser, nipple for fitting of air valve, equal Tee etc. complete including conveyance of pipe from factory to work site & testing of pipe line etc complete as per direction of Engineer - in-charge.
22Labour charges for lowering & Instalation of 7.5HP submersible pump Sets including fitting and fixing of delivery pipe to motor,NR Valve, Sluice valve and other fitting materials including cutting, welding and etc. including transportation to project site and site clearance etc. complete as per the direction of the Engineer-incharge.
23Fabrication of special joint including cutting and welding of pipes out of M.S. pipe / 100mm dia G.I.pipe including welding charges etc. complete.
24Laying & fitting of ARV/BFV/GI weldless Tee
25Construction of outlet at Tank
26100mm dia nominal bore G.I.pipe having wall thickness 4.5mm electrical resistance welded of medium class confirming to IS- 1239(part-1/2004) with latest ammendments, screwed at both ends as per IS-554 with socketed at one end and the other end protected with plastic threaded protector including its transportation and unloading at L.I.P. site. The socket confirming to ISI 1239(part II/1992) with latest ammendments in random length of 4 to 7 mtr.Each pipe should bear IS certification and manufacturers name/trade mark.
27100mm dia G.I.Bend ( Medium Duty) conforming to IS No-1239 (part II/1992) with ISI mark of reputed company.
28100mm dia G.I.Socket(Medium duty) with ISI mark
29100mm dia G.I.Flange ( Medium Duty) conforming to IS No-6392/1971 with ISI mark of reputed company.
30Cost of 7.5 HP Submerssible Pumpset 900 LPM at head of 25 mtr
31Supply of 160 mm Ø HDPE. Pipe PE - 80 ( PN-4) to deliver water at highest counter in complete shape and handed over to Pani Panchayat Chairman or Secretary.
322.5 sqmm submersible (3 core) flat cable
33200x100 mm dia M.S. T/W cap
34100mm dia C.I.Double Flanged Non Return Valve swing type PN-1.0 (IS-5312(Part-I-2004) with bypass arrangement with ISI mark of reputed company.
35100mm dia C.I.Sluice Valve Flanged type PN-1.0 as per (IS-14846-2000 Standard) with ISI mark of reputed company.
36100 mm dia M.S, T/W Clamp (Pair)
37160mm HDPE elbow spigot design 6 Kg. of ISI mark
38150mm dia C.I. Butter Fly Valve BS:5155/15: Kirloskar or equivalent make13095-CI MOC Lever Operated PN-1.0 with ISI mark of reputed including all cost, conveyance, cess etc complete but excluding cost of GST (As per S/R 2022)
3950MM DIA Air release valve with saddle &Raiser pipe.The air release valve shall confirm to IS14845 with ISImark including all taxes &royality etc.
40160X160X160 mm HDPE Tee spigot design 6 kg
41160 mm slipon flange
42Cost, supplying of 160mmx160mmx110mm dia Weldless G.I.Tee (3.6mm thickness) with bend, closing and opening arrangement of reputed brand including all cost, conveyance, cess etc complete but excluding cost of GST
43160 MM HDPE Tail piece 160 mm long
44160mm HDPE End cap
45Cost of 6 mm dia PVC Insulated Steel Wire rope
465/8 ' x3\\" Nut bolt F.T.
47⅛\\" thick Rubber Insertion
48Control Pannel with Automatic Star delta Starter, sheet steel enclosure suitable for operation of Squirrel cage induction motor up to 10 HP with 16 Amp (AC -3) duty contractor at 415 Volt+6%-15%, 3 phase, 50 Hz AC supply with over load relay range 8.92 to 13.5 Amp & no volt coil with electronic timer suitable for operation at voltage range of 300 to 440 V. The Starter should provide dependable protection against over load and single phasing fitted with Volt Meter, Ameter, MCB in complete shape including Indicator Lamp.
493x10 sqmm PVC insulated (HD) tropoder armoured Electric Cable with alluminum conductor for use in 3 phase power system of working voltage upto & including 1100 volts at 50Hz confirming to IS 7098(Pt-II) including cost of transportation to site.
5063 AMP Triple Pole Mainswich confirming to IS No.4064(Part I & II) with ISI marking of reputed company with utilisation capacity cagegory AC- 22.
513 Phase 4 wire 20-103x320 volt (P-N) Energy Meter
524.0 mm2 PVC Single Core Copper Wire ISI mark of reputed Company.
53T & P Materials Kit Coprising of tester,screw driver,DE spanner,plier,Ring spanner,suteble for maintainence of LIP.
542.5 cm thick greading,concrit (1:2:4) on roop slab with 12 mm and dawn grade size.HG chipce
55Labour for drilling a perfectly vertical bore hole of specified diameter (minimum 400 mm dia.) for a specified depth below ground level in alluvial soil strata by mud Rotary Rig drilling as required to suit the site condition as per the direction of Engineer in charge including use of own Rigs with its accessories, tools and plants and all consumables (like coir rope, cotton waste and bentonite powder etc. complete) etc. for lowering of 200mm dia GI/PVC Pipe for housing fitted with sockets and with or without well screen as per the necessity for the soft medium, hard and boulder formations (. GI/PVC casing pipes if required by the contractor to prevent collapse of over burden portion ) including lower and withdrawing of casing pipes after drilling 200mm to 450mm dia in over burden portion.Drilling for 200 (8”) dia pipe: From 0 mtr. to 100th meters
56Supply of all Labour & T&P for lowering the following sizes of PVC Pipes with or without slotted pipes as per the necessity from ground level & fitted & fixed up in perfectly verticaly position inlcuding cutting & threading pipe and slotted pipe and fixing all jointing materials etc. complete. and keeping the top of the casing pipe threaded including plugging tube wells to prevent entry of foreign materials from above excluding cost of fitting & joining materials.200mm dia PVC/GI Casing pipes
57Cleaning and developing the production well using their own compressor continuously worked till clear and adequate discharge is obtained from the tube well including supply and use of all necessary equipments and labour as per the direction of Engineer-in-charge.
58Supplying all materials,Labour T & P for packing the bore with washed gravel size (P-6) arround the well screen and pipes in good quality including cost of gravel ,conveyance,royality,etc complete as per direction Engineer-in-charge. (50m depth) =0.786 x (0.4² - 0.2²) x 50mtr = 4.716 say 4.7 cum
59Labour charges for cutting Transverse slot on 200 mm dia pvc pipe with slot size 1.5 mm as per specification
60Threading charges
618\\" PVC bail plug
628\\" PVC threaded end cap PN-10
63200mm x 12\\" long PVC shot piece
64200mm Ø Sch, 80 casing pipe
65Construction of 3 phase 11 KV HT line as per REC standard confirming to IE Rules 1956 with 300 kg 9 M long PSC Pole with 55 Sqmm AAAC Conductor average span length 40mtr with ,11 KV \\"V\\" Cross arm, with required No.of 11 KV T & C Disc. Polymer Insulators in tension point & 11 KV Pin Polymer insulators, Couping & Padding of Poles with all G.I.Channels. Danger Board at each Pole, Anti Climbing Devices, Stay Set at Bending point & double stay at end point with 18 mm G.I.H.T.Stay, concreting of Stay with Anchor plate, guarding at Road crossings etc if required including cost of all materials, labour transportation,inspection & commissioning etc. complete.
66Construction and erection of 11 /0.4 KV, 25 KVA Double Pole mounted Substation with 5mtrx3mtrx1.5mtr height mesonary toe wall /G.I. Flat fencing boundary wall with Flat with Polymer insulator ,L.T Dist Box with MCCB , Aluminim bus bar of single bay with kitkat fuse , sand filling and metal spearding with M.S.Grill gate ,all Channel matrials should be G.I , 7 Nos earthing with chamber with 3mtr G.I pipe of 40mm dia with connecting of 25mmx 5mm G.I flat to all earthing including 25KVA BIS Leble-II Star rated Transformer confirming to RE Rules 1956, mounted on 2.44 Mtr. Long structure, supported in 300 kg 9 mtr long PSC pole,transformer hard channel & top channel made of 2.8 M long 100 X 50 X 6 mm G.I.Channel, Transformer belting on 2.80 M long 50mm X 50mm X 5 mm G.I.Angle, (all REC SPN Std.F-3) with all accessories like 3 pole 11 KV HG Fuse(F-5)& A.B.Switches(F-9) both mounted on 2.8 M long 75mm X 40mm X 6 mm G.I.Channel and supported by 1.0 M long 50 X 50 X 5 mm G.I.Angle, with 3 No. 11 KV Lightening Arrestors and Danger board at each Pole, Anti climbing Devices & all other necessary fittings i.e required size Nuts & Bolts, Brackets, Cable, Cable Sockets as per TPCOCL specification etc. including cost of all materials, labour , transportation complete with liasioning for testing inspection & commissioning as per specification of TPCODL etc complete.
6790 Deg. Cut point.
68Electrical installation with electrical materials such as PVC tape, Ampere tape, 7/20 PVC copper wire, 3/20 PVC copper wire, GI flexible conduite pipe, No. 6 GI wire, Copper cable socket, GI socket and flange and petty materials required for electrical installation.All materials should be as per IS
69Electrical earthing including all materials as per the direction of the Engineer-incharge Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58541659
AUTHORITY Government Departments
TENDER VALUE 16.94 Lakhs
LAST DATE 27-11-2026
Authority
Authority Name Orissa Lift Irrigation Corporation Limited
Work Description Tender for Revival And Energisation Of Muguria-Iii T.W. Project Under N.Koili Block In Kataka District Under State-Plan 2026-27
Basic Detail
Tender No BID ID NO. 21/Dt. 09.11.2026
Bidding Type Tender
Location
City Cuttack
State Odisha
Key Dates
Publish Date 16 Nov 2026
Submission Date 27 Nov 2026
Open Date 30 Nov 2026
Finance
Tender Value 16.94 Lakhs
Tender Fee 7080
EMD 16949
Exemption Available
Document List
b2a99c2d-fcd2-4f1f-8c6f-d0852deeff66.html
BOQ_620723.xls
DTCNFINAL21.pdf
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 16, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Nov 27, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 5 days
Nov 30, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 8 days

Tender Documents

Download All (ZIP) ↓
html

b2a99c2d-fcd2-4f1f-8c6f-d0852deeff66.html

xls

BOQ_620723.xls

pdf

DTCNFINAL21.pdf

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender