Tender For Kumbakonam Block ,Thanjavur District - Anganwadi Repair 2026 -2027 Part.1. Renovation Of Anganwadi Building At Madhakovil Street In Pandaravadai Perumandi Panchayat
Tender Value
3.44 Lakhs
Estimated cost
Bid Submission
03 Dec 2026
16 days left
EMD
3440
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Thanjavur → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Kumbakonam Block ,Thanjavur District - Anganwadi Repair 2026 -2027 Part.1. Renovation Of Anganwadi Building At Madhakovil Street In Pandaravadai Perumandi Panchayat
BOQ
| Sl. No. | Item Description |
| 1 | Renovation of Anganwadi Building at Madhakovil street in Pandaravadai Perumandi Panchayat |
| 2 | Dismantling and Existing Wornout AC Sheet roofing including cost and conveyance alllabour Charges etc compleate W-0025 |
| 3 | Dismantling the Existing Plastering away from the site including cost & conveyance all Labour charges etc compleate |
| 4 | Earth work excavation for foundation in all clauses of soils and sub soils to full depth as may be directed except in hard rock requiring blasting but inclusive of shoring strutting and boiling out water whenever necessary et complete complying with standard specification |
| 5 | Supplying and filling in basement with filling River sand in layer of not more than 15 cm thick well rammed etc., complete. |
| 6 | Cement concrete 1:4:8 mix ( one cement four sand and eight aggregate) using 40mm gauge hand broken granite tone jelly for foundation including dewatering if found ecessary and laid in layers of not more than 15 cm thick and compacted,etc., complete complying with standard specfication |
| 7 | Brick work in cm 1:5 mix(one cement and five sand )using country bricks ground maded of size 23 x 11 x 7 cm including curing,finishing and cost & Conveyance of all materials etc., complete. |
| 8 | Providing and Fixing of polyurethane foam for Sloped roofas thermal insulation panelsor Sandwich insulated panels with external .50mm total coated thickness pre paintedGalvalume sheet with trapezoidal roofing profile having crest height of 38mm at every333mm span , whereas internal 0.50mm total coated thickness pre painted galvanizediron sheet with micro ribbed profile and the insulation material will be chlorofluorocarbon and hydro chlorofluoro carbon free , high performance rigid polyurethane foam(PUF) conforming to IS 12436 having density not less than 40±2Kg/M3,Thermalconductivity (K-Value) 0.024 W/m.K measured at 10 degree C mean temperature alongwith necessary flashings such as L flashing, C flashing etc& accessories such as screwsfastners ,sealants etc for fixing the panel etc., complete complying with standardspecification W- 0373 |
| 9 | Plastering with cm 1:5 mix( one cement and five sand ) to 12 mm thick including cost and conveyance of all materials in all floors etc.,as directed by departmental officers etc, complete complying with standard specifications. |
| 10 | Supplying & fixing with cuddapah slabs 20-30mm thick for cup board thick and pointed with cement mortar 1:3 - |
| 11 | Paving the floor with pre-polished concrete anti-skid tiles (Required shape and design) of 20mm thick of approved quality and colour laid in Cement Mortar 1:3 (One Cement and Three crushed stone M.Sand) 20mm thick and pointed with white cement mixed with colouring pigment at the rate of 0.40 Kg. / sq.m., curing, etc., complete complying with standard specification and as directed by the departmental officers. (The make and brand of the tiles should be got approved by Executive Engineer before use on works) Using anti-skid tiles (Observed Data) |
| 12 | Providing granolethic floor finish in cement concrete 1:2:4 mix using 10-12mm ISS metal to 25mm thick including cost and conveyance of all materials to site and all labour charges for mixing, laying, curing etc complete |
| 13 | Distembering two coats with best approved distember including cost and conveyance of all materials to site and all labour charges etc complete |
| 14 | Exterior Emulsion two coats with best approved Plastic Emulsion including cost and conveyance of all materials to site and all labour charges etc complete |
| 15 | Painting two coats over old iron works using ready mixed enamel paint inculding cost and conveyance of materials and all labour charges etc.,complete |
| 16 | Replacement of New Doors & Windows |
| 17 | Window |
| 18 | Provision for RWH arrangement |
| 19 | Electrical Arrangements |
| 20 | Light Point (SD18) |
| 21 | Light Point (SD18) |
| 22 | Light Point (SD18) |
| 23 | Exhaust Fan(SD114) |
| 24 | LED Tube Light |
| 25 | Provision for Name board & Photograph charges |
| 26 | GST Amount for providing Service to Government Contract Works for the above Construction Works. { GST Amount is the Total GST Amount for total overall quoted amount (Both Construction and Maintenance) above this row in column \\"BB\\" for all works in this package}. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 16, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedDec 03, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 16 daysDec 03, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 16 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender