Tender For Improvements To Sanitary And Plumbing Arrangements And Purchase Of Furnitures To Kalingarayan Illam At Erode.
Tender Value
12.88 Lakhs
Estimated cost
Bid Submission
30 Nov 2026
13 days left
EMD
13300
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Erode → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Improvements To Sanitary And Plumbing Arrangements And Purchase Of Furnitures To Kalingarayan Illam At Erode.
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling floor finish and dadooing walls in cement mortar with mosaic tiles / Glazed tiles / Cuddapah slabs as directed by the departmental officers. |
| 2 | Dismantling clearing away and carefully stacking materials useful for reuse of any thickness of Pain cement concrete as directed by the departmental officers. |
| 3 | Clean removal of cement plaster from walls as directed by the Departmental officers. |
| 4 | BRICK WORK IN CEMENT MORTAR 1:5 (One cement and five M-sand) mix using II class table moulded chamber burnt Bricks of size 9” x 4 3/ 8” x 2 3/4” including cost and conveyance of all materials from approved quarry and including all other labour charges etc., complete complying with standard specification and as directed by the departmental officers. |
| 5 | BRICK PARTITION WALL OF 11.5 CM TK IN CEMENT MORTAR 1:3 (One cement and Three M.sand) mix using II class Table moulded chamber burnt Bricks of size 9\\"x43/8x2 3/4' including cost and conveyance of all materials from approved quarry and including all other labour charges etc., complete complying with standard specification and as directed by the departmental officers for ground floor. |
| 6 | SPECIAL CEILING PLASTERING and finishing all the RCC exposed surfaces such as RCC slabs, sunshades, canopies, staircase steps, landing slabs etc., with cement mortar 1:3 (One cement and three P.sand) 10mm thick including hacking the surfaces and providing necessary cement mortar nosing beading as per standard size and specification wherever necessary using the same mix as directed by the departmental officers etc., complete complying with standard specification. |
| 7 | PLASTERING with cement mortar 1:5 mix (One cement and five P.sand) 12mm thick including cost and conveyance of all materials from approved quarry and including all other labour charges etc., complete complying with standard specifications and as by the departmental officers. |
| 8 | Providing Polymer Coating (Water Proof Coating) for sunken portion of toilet with following specification and the surface shall be cleaned to remove all dust, foregin, matters lose materials or any other deposits of contamination by rubbing with wire brush. Slurry: Dry blend and polymer liquid blend shall be mixed into the desired ratio as per recommendation of the supplier.The mix shall be stirred thoroughly until no bubbles remain in the mix. Any lumps found in mix shall be removed. Apply first coat of polymer modified cementitious slurry by brush on wet cleaned surface. After drying, second coat shall be applied on the first coat as directed by the departmental officers etc. The rate inclusive of cost of aterials and labour, etc., complete complying with standard specifications and as by the departmental officers. |
| 9 | Plastering with Cement Mortar 1:3 (One Cement and Three Plastering Sand) 12mm thick mixed with water proofing compound conforming to BIS at 2% by weight of cement used including mortar plasticizer at 200ml per 50Kg of cement used, finsihing, curing, etc., complete in all floors complying with standard specification and as directed by the departmental officers. |
| 10 | CEMENT CONCRETE 1:5:10 (One cement, five sand and ten aggregate) mix using 40 mm size HBGS jelly laid in layers of not more than 15 cm thickness including ramming, consolidating and curing etc., complete complying with standard specification and as directed by the departmental officers for foundation. |
| 11 | Paving the floor with Vitrified tiles of size 600mm x 600mm x 8mm of approved colour and quality laid in cement mortar 1:3 (One cement and three sand) 20mm thick in all floors and the top pointed with the colour cement etc., complete complying with standard specification and as directed by the departmental officers. (The tiles should be got approved by the Executive Engineer before use on works) |
| 12 | Flooring with following ceramic tiles of size 305 x 305 x 6 mm laid over 20 mm thick cement mortar 1:3 (One Cement and Three Sand) base mortar over the existing slab / floor including cutting the tiles to the required size with special cutter wherever necessary, laying in position and pointing with white cement mixed with colouring pigment at the rate of 0.3 Kg. / sq.m. etc., complete complying with standard specification. (The make and brand of the tiles should be got approved by Executive Engineer before use on works) |
| 13 | Dadooing walls with following best approved quality, Ceramic tiles of size 300mm x 450mm x 8mm in Cement Mortar 1:2 (One Cement and Two sand) 10mm thick and pointing the joints with white cement mixed with colouring pigments at the rate of 0.40 Kg. / sq.m. neatly in all floors, curing, etc., complying with standard specification and as directed by the departmental officers.(The make and brand of the tiles should be got approved by Executive Engineer before use on works) |
| 14 | Providing and fixing of Aluminium Composite Panel (ACP) 4 sided having 50 x 25 x 1.50mm frame work vertical and horizontals out of specially designed extruded sections withstand wind pressure of 180 Kg/sq.m and fabricated fixed at all level elevation and heights.The extruded section cutting and fixing required space extruded section shall be of 6063 and alloy of BSH 9 confirming T is – 63400 rate shall included to fix the main frame with necessary clamps, fasteners, bolt nuts etc. The main frame of extruded section shall be of 22843 & 22739 (H9) grade conforming to BS 4174 (or) IS 8147. Rate shall included 4mm thick ACP sheet (0.25 + 3.5 + 0.25) fixing with spacer tape and the ACP sheet bounded with special type structural sealant of dow corning 789 or equivalent in dust free conditions the gaps between ACP sheet to be filed with whether sealant and backer rod or 12mm foam sheet to ensure water and air tightness in all complete complying with standard specification as directed by the departmental officers |
| 15 | Pre-Painted Galvanized Iron Door Frame: Providing and fixing door frames from sections made of galvanized steel powder coated (Base steel as per IS 513 'D' quality, galvanized as per IS 217 with zinc of 120 grams / sqm.). The factory made section should be with a powder coating of pure polyester powder of 50-60 microns thick with total coated thickness of 1.25mm. Size of door frame section should be of 105 x 60mm with a rebate of 37mm to accommodate 35mm thick door shutter. The frame section should have groove to insert gasket. 2 tie rods of 10mm tor steel to be provided at bottom. Provision for aldrop, mortise lock to be made in the section as per the instruction of Engineer-in-Charge. The frame ection should be cut to length, and joined by way of welding. Note: 1.25mm thick (Total coated thickness tolerance as per IS 513 |
| 16 | Supplying and fixing in position White / Colour Special Delux Model Glazed Cascade Type Parryware / Hindware / Equivalent Wall Mounted European Water Closet of best quality and approved make with 100mm P or S trap connecting with CI pipe of 100mm dia / PVC pipe of 110mm dia, double flapped rigid PVC black seat and seat cover with CP brass hinges including cost of white cement, cement for packing, spun yarn, teak wood plugs, brass screws, etc., including supplying and fixing 10 litres capacity PVC / 12.5 litres capacity porcelin low level flushing tank with a pair of CI brackets, etc., complete with all fittings, such as, 15mm brass ball valve with polythene float with brass handle, union coupling connected by means of 40mm white PVC flush hand using indian adopter joint including all internal fittings, such as, 15mm bras connections,15mm GM wheel valve, 15mm brass nipple (2 Nos.), 15mm nylon connection, TW plugs, screws and also giving necessary connection to the PVC pipe and painting the CI brackets with 2 coats of approved paint over one coat of red oxide primer, dismantling the masonry and re-doing the dismantled masonry to original condition, etc., complete complying with standard specifications. (The EWC and flushing tank with all accessories should be got approved by the Executive Engineer before use on works) with 10 litres capacity flushing tank with all internal dual flush fittings with normal seat cover Wall Fitting |
| 17 | Supplying and fixing of Oval Shape Wash Hand Basin of size 560 x 450mm with a pair of cast iron brackets, including cost 15mm dia brass CP pillar tap, 32mm dia \\"B\\" class GI waste pipe with rubber plug and chain, 15mm dia GM wheel valve, 15mm brass nipple, 15mm dia nylone connection, 32mm dia CP brass waste coupling including fixing of wash basin using CI brackets on to the wall in position with TW plugs and screws, rubber washers, white lead and giving necessary water supply connection and painting the brackets with two coat of painting over a priming coat of anti-corrosive paint including testing for leakages etc., complete complying with standard specification and as directed by the departmental officers. (The wash hand basin and specials should be got approved by the Executive Engineer before use on works) |
| 18 | Supplying and fixing in position best quality and approved make Indian made white wash hand basin of size 550 x 400mm (with pedestal ) with a pair of cast iron brackets, including cost 15mm dia brass CP pillar tap, 32mm dia \\"B\\" class GI waste pipe with rubber plug and chain, 15mm dia GM wheel valve, 15mm brass nipple, 15mm dia nylone connection, 32mm dia CP brass waste coupling including fixing of wash basin using CI brackets on to the wall in position with TW plugs and screws, rubber washers, white lead and giving necessary water supply connection and painting the brackets with two coat of painting over a priming coat of anti-corrosive paint including testing for leakages etc., complete complying with standard specification and as directed by the departmental officers. (The wash hand basin and specials should be got approved by the Executive Engineer before use on works) |
| 19 | Supplying and fixing in position 15mm dia Swan neck tap / CP Shower Arm with Overhead Shower Rose / CP Wall Mixture Tap 3 in 1 system with Hand Showers / CP Two Way Bib Cock with Health Faucet / CP Angle Cock Tap of approved make conforming to BIS specifications and quality including cost of shellac, thread, etc., complete complying with standard specification and including cutting and threading wherever necessary. (Taps should be got approved by the Executive Engineer before use on the works) |
| 20 | Swan neck tap |
| 21 | CP Shower Arm with Overhead Shower Rose |
| 22 | CP Wall Mixture Tap 3 in 1 system with Hand Showers |
| 23 | CP Two Way Bib Cock with Health Faucet |
| 24 | CP Angle Cock Tap |
| 25 | Supplying and fixing in Brass Chromium Plated Soap Tray size 150mm x 100mm etc., complete complying with standard specification and as directed by the departmental officers. (The wash hand basin and specials should be got approved by the Executive Engineer before use on works) |
| 26 | Supplying and fixing in Brass Chromium Plated Towel Rail 60cm long and 20mm dia with Brackets etc., complete complying with standard specification and as directed by the departmental officers. (The wash hand basin and specials should be got approved by the Executive Engineer before use on works) |
| 27 | Supplying and fixing in PVC / Fibre Glass Framed 5.5mm thick Mirror, Shelf Type size 600mm x 450mm with Hard Board Backing size 600mm x 450mm etc., complete complying with standard specification and as directed by the departmental officers. (The wash hand basin and specials should be got approved by the Executive Engineer before use on works) |
| 28 | Supplying and fixing in Special Type Mirror of size 1000 x 780mm etc., complete complying with standard specification and as directed by the departmental officers. (The wash hand basin and specials should be got approved by the Executive Engineer before use on works) |
| 29 | Supplying and fixing in Tamil Brass Letters size 20 cm etc., complete complying with standard specification and as directed by the departmental officers. (The wash hand basin and specials should be got approved by the Executive Engineer before use on works) |
| 30 | Supplying, laying and jointing CPVC pipes OF Standard Dimension Ratio 11 (Pressure class 1) conforming to IS:15778 - 2007 of approved quality and best variety of the following dia including cutting and fixing CPVC specials using CPVC adhesives (Solvent Cement) (but excluding cost of such specials) and fixing into wall with teak wood plugs, CPVC clamps and screws making holes on the wall (or) drilling holes in the roof and making good the dismantled portion to original condition with necessary brick work / cement concrete and plastering neatly wherever necessary with necessary scaffolding charges, etc., complete complying with standard specifications and as directed by the departmental officers. (The CPVC pipes shall be got approved by Executive Engineer before use on works) - Internal water supply above ground level. |
| 31 | 32 mm dia |
| 32 | 25 mm dia |
| 33 | Supplying CPVC Specials in water supply arrangements (both in internal and external water supply arrangements) Since the labour for cutting, pasting, sundries have already been included under pipe line item of works, no separate provision for fixing UPVC specials needs to be allowed |
| 34 | Elbow 32 mm dia |
| 35 | Elbow 25 mm dia |
| 36 | Coupler 32 mm dia |
| 37 | Coupler 25 mm dia |
| 38 | Tee 32 mm dia |
| 39 | Tee 25 mm dia |
| 40 | Supplying and fixing in position best quality PVC soil / waste pipes of various dia having 6 kg / sq.cm. pressure BIS mark and providing leak proof joints using PVC adhesives including fixing to the wall with special PVC / MS clamp, teak wood plugs, brass screws, etc., and making connection to all sanitary fittings, dismantling masonry / RCC works wherever found necessary and making the good dismantled portion to the original condition, including testing for any leakages, etc., complete complying with standard specifications. (The PVC pipes should be got approved by the Executive Engineer before use on works). The rate for earth work excavation will be measured and paid separately in the cases where the pipe lines are proposed to laid below ground level |
| 41 | 110 mm dia |
| 42 | 75 mm dia |
| 43 | Supplying and fixing in position PVC specials of the following dia and types of approved quality confirming to BIS and providing leak proof joints including fixing to the walls and giving connection to the PVC soil stacks, dismantling the masonry or RCC works and re-doing the dismantled portion to original condition etc., complete complying with standard specifications. (The PVC specials should be got approved by the Executive Engineer before use on works). |
| 44 | 110 mm dia Door Elbow |
| 45 | 110 mm dia Bend |
| 46 | 110 mm dia Door Tee |
| 47 | 75 mm dia Door Elbow |
| 48 | 75 mm dia Bend |
| 49 | 75 mm dia Door Tee |
| 50 | Supplying and fixing in position first quality and approved variety of Gun metal Gate Valve / Wheel Valve of 25 mm dia with BIS including cost of shellac, thread balls, etc., complete complying with standard specifications (for both internal and external water supply arrangements). The valves to be used on work shall be got approved by the Executive Engineer before use on work. |
| 51 | Painting two coats of old plastered wall surface with ready mixed plastic emulsion paint of first class quality and of approved colour over a priming coat including thorough scrapping, clean removal of dirt, and including necessary plaster of paris putty, wherever required etc., complete complying with standard specification and as directed by the departmental officers. |
| 52 | Painting the old wall two coats with approved weather proof Exterior Emulsion paint over one primer coat on cement plastered wall surface ect., complete complying with standard specification and as directed by the departmental officers. |
| 53 | Painting Old iron works such as steel doors, windows, ventilators, window bars, balustrades etc., with Two coats of best approved first quality and colour of synthetic enamel paint in all floors etc., complete complying with standard specification and as directed by the departmental officers.(The make, quality and colour of paint should be got approved by the Executive Engineer before use on works.) |
| 54 | Painting Old wood work with Two coat of synthetic enamel ready mixed paint of approved quality and colour in all floors etc., complete complying with standard specification and as directed by the departmental officers. (The make, quality and colour of paint should be got approved by the Executive Engineer before use on works.) |
| 55 | Polishing the wood work with two coats of best French (Lac) polish with approved quality and brand over a coat of bee’s waxing including preparing the wooden surface to receive polishing, etc., complete complying as per the standard specifications and as directed by the departmental officers. (The make, quality and colour of french polish, bees vax should be got approved by the Executive Engineer before use on works.) |
| 56 | Supplying and fixing of windows and door curtain cloth of approved quality and colour including stitching as directed by the departmental officer |
| 57 | Supplying and fixing of imported washable wall paper of approved quality and colour including labour charges as directed by the departmental officers |
| 58 | Supplying of Three seated sofa made with seasoned silver oak wood, covered with fine quality upholstery materials and high density foam |
| 59 | Cot – 6’6” x 6’0” – Ruby Made with Hi –Seasoned 1st Quality teak wood, frame work of head rest, leg rest and platforms. The frames of headrest and leg rest are laminated with veneer on top of 12 mm thick exterior grade wood particle boards (ISI & ISO Certified). The platform frame is finished with 12 mm thick exterior grade wood particle boards (ISI & ISO Certified). Necessary wooden beadings are fixed for decorative purpose. All wooden surfaces are fine prepared and melamine polished |
| 60 | Restolex Matters – Royal Quilt 6’6” x 6’ x 5” Made with Chain Stitch Quilted Premium Quality Fabric High Density PU Foam, Rubberized Natural Fiber, Bounded Padding, with 2 no. of pillow.1 |
| 61 | Center Tea poi - 3’ X 2’ - Lotus – Glass Top Made with Hi –Seasoned 1st Quality teak wood for leg, vertical and horizontal sections. The bottom tray is laminated with veneer on top of 12 mm thick exterior grade wood particle boards (ISI & ISO Certified) and melamine polished. Also 12 mm thick cooling glass is placed on the top of tea poi. |
| 62 | GST 18% Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 16, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 30, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 13 daysDec 01, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 14 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender