Tender For Supply/Fixing Of 12 Nos. 7 Mtr Decorative Pole Alongwith 10X2 Cable, Arm Bracket, Switches Etc. At Durga Hospital To H.P. Petrol Pump, Zone-06, Kanpur.
Tender Value
9.78 Lakhs
Estimated cost
Bid Submission
20 Nov 2026
1 days left
EMD
85000
Bank guarantee accepted
Document Fee
1180
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kanpur → Uttar Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Supply/Fixing Of 12 Nos. 7 Mtr Decorative Pole Alongwith 10X2 Cable, Arm Bracket, Switches Etc. At Durga Hospital To H.P. Petrol Pump, Zone-06, Kanpur.
BOQ
| Sl. No. | Item Description |
| 1 | Supply & Fixing of Decorative Pole made of mild Steel with a total height of 7 mtr above ground level with Single arm bracket for S.L and predefined laser cut pattern in the top portion of the bracket of the pole. Pole bottom base section shall be 250x250x1500mm, 4mm thickness column with two side predesigned laser cut to illuminate the surrounding in 20W with noticeable mode, between section pole of 90x4500x3.2mm, then 76x1000x3mm top bracket with illuminated laser cut pattern design one side of 1000mm to bold the S.L. as per shared drawing. The base plate of pole shall be of size 400x400x12mm. Provision for inside termination box with for away connector & Ions 6 Amps MCB for local isolation. The pole is primarily coated with primer, secondary epoxy resin and top coated with UV stabilized |
| 2 | Supply and fixing of LED Street light Fitting with mandatory driver set having die cast aluminium body with toughend glass UV stabilized PC Cover and lenses suitable for 110Watt. To130 Watt and Confirming to IP 66, and IK07 and above protection having Company LOGO Engraved complete in all respect including Labour.16800-18000 system lumens, High Power LED with lenses, >120 Lm/W, PF>0.95, THD 70,, Potted driver Set in Metal housing (Not Circuitory) Phase to phase Protection at 440V \& >300V auto cut and re-start feature, 4 KV internal Surge Protection, with 5 years warrantee.As per Elect. SOR 23.18 |
| 3 | S/L of aluminium conductor PVC insulated armoured served she thedcable1100volts gradeat a depth of 750mm below ground level over cushion of 75mm thick sand all around and protected with burn tbrick son sides and top.On surfacethecablerunshallbefixedonM.S.clamps etc.ofsuitablesizeordirectedbytheE/Icomplete inallrespects, the armouring of the cable shall be properly connected with the earthconductor by clamps etc. 10 sq mm 2 core. |
| 4 | Supplying and fixing 30 A, 415 V, TPN Industrial type socket outlet, with 4 pole and earth, metal enclosed plug top alongwith 30 A \\"C\\" curve, TP MCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket out let and complete with connections, testing and commissioning etc. as required.As per E&M DSR No.- 2.2erly connected with the earth conductor etc. 16 sq mm 2 core. |
| 5 | S/F of 02 KW Automatic Switch Complete in all respect. |
| 6 | Supply and burying of 40mm dia x 4.5mtr long G.I. pipe vertically for earthing having 12mm dia. Holes spaced 75mm apart drilled up to 2 mtr. form the bottom complete with earthing lead of no. 6 to 8 SWG G.I. wire in GI pipe up to apron (and from apron to switch board the cost of GI wire and pipe will be extra) upto switch board 30cm sq. G.I. box with hinged over masonry enclosure, foundation at top, alternate layers of charcoal/coke and salt at least 150mm thick alround etc. as per directions of Engineer-incharge complete in all respects as per drawing. |
| 7 | Supply and Wiring of submains with two nos. of 2.5 sq. mm.FRLSH PVC insulated 1100 V grade single core multistrand copper conductor cable in existing conduit complete with supply of all material labour and T&P required for proper completion of the work as directed at site by Engineer in charge |
| 8 | Supplying and fixing single pole 5 A to 32 A rating, 240/415 V, 10 kA, \\"C\\" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.As per E&M DSR No.- 2.10.1 |
| 9 | Supply & laying of 63 mm dia (OD-63mm& ID51mmnominal)DWC HDPE Pipe ISI marked alongwith all accessories like socket, bend, couple etc.confirming to IS14930 complete with fitting and cutting jointingetc direct inground(75cmbelowgroundbelow including excation and refillling the trench but excluding sand cushoning and protective covering etc. complete |
| 10 | upply & Fixing of plain or pin type copper tin plated cable socket (Lug), 10 sq mm to the cable leads, |
| 11 | Add GST 18% Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 16, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 20, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 1 dayNov 20, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 1 dayTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender