Tender For Providing And Fixing Of Gi Profile Sheet Over The Stp Extension Porch Area At Nsic H.O. Building, Okhla Industrial Estate, New Delhi — 110020.
Tender Overview
Project Description
Tender For Providing And Fixing Of Gi Profile Sheet Over The Stp Extension Porch Area At Nsic H.O. Building, Okhla Industrial Estate, New Delhi — 110020. Civil Works (Dsr Items) Civil Works 1 4.2 Qty Unit Rate (Rs.) Amount (Rs,) 4.2.3 Providing And Laying Cement Concrete In Retaining Walls, Return Walls, Walls (Any Thickness) Including Attached Pilasters, Columns, Piers, Abutments, Pillars, Posts, Struts, Buttresses, String Or Lacing Courses, Parapets, Coping, Bed Blocks, Anchor Blocks, Plain Window Sills, Fillets, Sunken Floor Etc., Up To Floor Five Level, Excluding The Cost Of Centering, Shuttering And Finishing: 1:2:4 (1 Cement: 2 Coarse Sand (Zone-Iii) Derived From Natural Sources : 4 Graded Stone Aggregate 20 Mm Nominal Size Derived From Natural Sources) 1 6 Masonry Work 6.4 Brick Work With Common Burnt Clay F.P.S. (Non Modular) Bricks Of Class Designation 7.5 In Superstructure Above Plinth Level Up To Floor V Level In All Shapes And Sizes In : 0.18 Cum 8404.13 1512.74 6.4.1 Cement Mortar 1:4(1 Cement :4 Coarse Sand) 1.07 Cum 7936.28 8491.82 2 10.16 Steel Work In Built Up Tubular (Round, Square Or Rectangular Hollow Tubes Etc.) Trusses Etc., Including Cutting, Hoisting, Fixing In Position And Applying A Priming Coat Of Approved Steel Primer, Including Welding And Bolted With Special Shaped Washers Etc. Complete. 10.16.1 Hot Finished Welded Type Tubes 840.00 Kg 165.11 138692.40 3 12.21 33.00 Mtr 259.17 8552.61 4 12.50 Providing Gola 75X75 Mm In Cement Concrete 1:2:4 (1 Cement: 2 Coarse Sand: 4 Stone Aggregate 10 Mm And Down Gauge), Including Finishing With Cement Mortar 1:3 (1 Cement: 3 Fine Sand) As Per Standard Design : Providing And Fixing Precoated Galvanised Iron Profile Sheets (Size, Shape And Pitch Of Corrugation As Approved By Engineer-In-Charge) Of Total Coated Thickness 0.50 Mm (Base Metal Of Minimum 0.45 Mm Thickness With Total Coating Thickness Of0.05Mm) With Zinc Coating 120 Grams Per Sqm As Per Is: 277, In 240 Mpa Steel Grade, 5- 7 Microns Epoxy Primer On Both Side Of The Sheet And Polyester Top Coat 15-18 Microns. Sheet Should Have Protective Guard Film Of 25 Microns Minimum To Avoid Scratches During Transportation And Should Be Supplied In Single Length Upto 12 Metre Or As Desired By Engineer-Incharge. The Sheet Shall Be Fixed Using Self Drilling /Self Tapping Screws Of Size (5.5X 55 Mm) With Epdm Seal, Complete Upto Any Pitch In Horizontal/ Vertical Or Curved 111.53 Sqm Sn 627.35 69968.35 Surfaces, Excluding The Cost Of Purlins, Rafters And Trusses And Including Cutting To Size And Shape Wherever Required. 13 Finishing 5 13.2 15 Mm Cement Plaster On The Rough Side Of Single Or Half Brick Wall Of Mix: 13.2.1 1:4(1 Cement: 4 Fine Sand) 9.85 Sqm 339.26 3341.71 6 13.47 Finishing Walls With Premium Acrylic Smooth Exterior Paint With Silicone Additives Of Required Shade: 13.47.1 New Work (Two Or More Coats Applied @ 1.43 Ltr/10 Sqm Over And Including Priming Coat Of Exterior Primer Applied@ 0.90 Liter/10 Sqm) 15.41 Sqm 145.32 2239.38 7 13.62 Painting With Synthetic Enamel Paint Of Approved Brand And Manufacture Of Required Colour To Give An Even Shade 13.62.1 Two Or More Coats On New Work Over An Under Coat Of Suitable Shade With Ordinary Paint Of Approved Brand And Manufacture 85.26 Sqm 192.16 16383.56 8 13.80 Providing And Applying White Cement Based Putty Of 13.76 Sqm 132.54 1823.75 Average Thickness 1 Mm, Of Approved Brand And Manufacturer, Over The Plastered Wall Surface To Prepare The Surface Even And Smooth Complete. Dismantling And Demolishing 15 9 15.2 Demolishing Cement Concrete Manually/ By Mechanical Means Including Disposal Of Material Within 50 Meters Lead As Per Direction Of Engineer - In - Charge. 15.2.1 Nominal Concrete 1:3:6 Or Richer Mix (Including Equivalent Design Mix) 0.50 Cum 2067.44 1033.72 10 5.18 Dismantling Steel Work In Built Up Sections In Angles, Tees, Flats And Channels Including All Gusset Plates, Bolts, Nuts, Cutting Rivets, Welding Etc. Including Dismembering And Stacking Within 50 Meters Lead 100.00 Kg 4.8 480.00 11 15.57 12 18.78 Dismantling Aluminium/ Gypsum Partitions, Doors, Windows, Fixed Glazing And False Ceiling Including Disposal Of Unserviceable Material And Stacking Of Serviceable Material Within 50 Meters Lead As Directed By Engineer In-Charge Making Chases Up To 7.5X7.5 Cm In Walls Including Making Good And Finishing With Matching Surface After Housing G.I. Pipe Etc. 85.26 Sqm 47.86 4080.54 33.00 Mtr 172.33 5686.89 Sor C 13 B 13 50.1 Market Rate Based Items Restoration Of The Dismantled False Ceiling Area, Including Repairing Of Existing Aluminium Grids[(If Any) And Placement Of All False Ceiling Tiles, Electrical Lights Etc. Including Necessary Required Material, If Any For Restoration Of The Area As In Earlier Condition
AI Tender Summary
Tender Timeline
Tender Published
Tender notice published.
CompletedBid Submission Deadline
Offline submission at the designated office.
Upcoming · 7 daysTender Documents
Download All (ZIP) ↓We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender