Defence Statutory Bodies & Commissions/Committees Closing in 13 days TDR #58540942

Tender For Addition/Alteration To Mt Complex At Afs Hasimara

Issued by Statutory Bodies & Commissions/Committees · Jalpaiguri, West Bengal
Tender Value
42.50 Lakhs
Estimated cost
Bid Submission
05 Dec 2026
13 days left
EMD
85000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Jalpaiguri → West Bengal
EMD Exemption
Available
Quantity
Not Available

Project Description

Tender For Addition/Alteration To Mt Complex At Afs Hasimara

BOQ

Name of Work:- ADDN/ALTN TO MT COMPLEX AT AFS HASIMARA
Sl. No. Item Description
1Item Rate BoQ BoQ_Ver4.0 Item Rate Normal INR Only INR Select, Excess (+), Less (-) Less (-) Tender Inviting Authority:GE (AF) HASIMARA Name of Work : ADDN/ALTN TO MT COMPLEX AT AFS HASIMARA Contract No: GE/HAS/ /2026-27 Name of the Bidder/ Bidding Firm / Company : PRICE SCHEDULE 'A' (BoQ)(This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only) NUMBER # TEXT # TEXT # NUMBER # TEXT # NUMBER NUMBER TEXT TEXT # NUMBER # TEXT# TEXT # NUMBER # NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER # NUMBER # TEXT TEXT NUMBER # NUMBER # DATE NUMBER # NUMBER # TEXT # Sl.No. Description of Item Item Code / Make Quantity Units Estimated Rate Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency RATE In Figures To be entered by the Bidder Rs. P Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category TOTAL AMOUNT Without Taxes TOTAL AMOUNT With Taxes TOTAL AMOUNT In Words
2Demolition of brick work or sone/boulder masonry, built in cement mortar including all quoiins, pillars etc, separation of serviceable materials from the unserviceable, stacking the serviceable materials, complete all as specified and directed.
3M&L for brick work with sub class 'B' bricks, old size, burnt clay bricks, straight or curved on plan exc 6 mtr mean radius built in CM (1:6), complete all as specified and directed.
4Taking down cement plaster of any description any thickness incl racking out joints hacking for keys scrubbing down with water etc, including disposal of debris and rubbish to a distance not exceeding 100m, complete all as specified and directed.
5M&L 15mm thick rendering in CM (1:6) on fair faces of brick work or concrete surfaces of wall, finished even and smooth without using extra cement, complete all as specified and directed.
6M & L for rendering 15mm thick in two coats (10mm under layer + 5mm top layer) on fair faces of brick work or concrete surfaces of wall in CM (1:4), mixed with water proofing compound on top layer as per manufacturer's instructions, finished the surface even and fair without using extra cement, complete all as specified and directed. (Note : WPC shall be measured and paid separately as 'supply only'.)
7Supply only liquid water proofing compound conforming to IS: 2645 - 1975 specification, complete all as directed.
8M&L for preparation of newly plastered or unplastered surfaces of walls and applying two coats of distemper oil emulsion over a coat of chalk whiting primer, complete all as specified and directed.
9M&L for preparation of newly plastered surfaces of wall and applying two coats of 100% premium acrylic weather proof exterior emulsion paint, alkali & fungal resistance, approved colour and shade (pattern deep green/camouflage), over and including a primming coat of exterior emulsion primer as per manufacturer's instructions, complete all as specified and directed.
10M&L for preparation old plastered surfaces of wall and applying one coat of 100% premium acrylic smooth exterior smooth emulsion paint alkali & fungal resistance of shade deep green/camouflage pattern, as per manufacturer's instructions, complete all as specified and directed.
11S&F of rolled sections as in framing for cladding, glazing and the like fixed with angle cleats and connecting plates etc, Fe-410W (Gde-E-250) quality A, complete all as specified and directed.
12M&L for preparation of new steel or iron surfaces of any description not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint (1st grade quality) over a coat of red oxide primer, complete all as specified and directed.
13M&L for 75mm thick PCC (1:4:8) type D2 (using 40mm graded crushed stone aggregate) as in sub base, floors & pavings etc, complete all , complete all as specified and directed.
14Dismantling of floor, hearth or wall tiles including cement mortar bedding (but not backing) and remvoing rubbish off the premishes, complete all as specified and directed.
15M&L for non skid ceramic coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.18 Sqm but not exceeding 0.38 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement of match the surfaces over and including 15mm thick screed bed in CM (1:6), complete all as specified and directed.
16M&L for glazed ceramic coloured tiles in vertical surface 350 x 250 x 7mm / 450 x 300 x 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match, over and including 10mm thick rendering back coat in CM (1:4), complete all as specified and directed.
17M&L for machine cut kota stone slab flooring and shelves, 20-25mm thick, laid over and including cement screed bed/bedding layer of 20mm thick, in CM (1:6), laid and jointed with grey cement slurry, mixed with pigment to match the shade of the slab including rubbing and polishing, complete all as specified and directed.
18S&F for 605 x 605mm GI frame work for seamless ceiling comprising of Gl perimeter channnel 0.55mm thick with two unequal flanges of 20 and 30mm and web of of 27mm fixed to surrounding wall using nylon sleeves and screws at 450mm centre to centre/intermediate channel 0.9mm thick having two equal flanges of 15mm each and web of 45mm suspended from soffit at approx 900mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55mm thickness having kurled web of 50mm and flange of 26mm each with lips of 10.5mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457mm centre to centre, hanger with 4-6mm dia GI (length as required) adjusting level fixed to roof slabs/truss by means of ceiling cleats made out of GI flat 40 x 3mm size 60mm long and expension hold fast evers 12.5mm dia 40mm long including providing 6mm thick non asbestos fibre cement building board fixed or laid/ inserted to GI framework with screws, for fixing 600mm x 600mm grid, complete all as specified and directed.
19S&F of solid PVC wall lining consisting of 5mm thick plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame, as per specifications, complete all as specified and as directed.
20S&F 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC frame, as per specification and drawing, complete all as specified and as directed.
21Taking down PVC frame with shutter of any description exc. 1 but n. exc. 2 Sqm each, complete all as specified and directed.
22S&F powder coated (minimum thickness of powder coating 50 micron) aluminium work for doors, windows, ventilators and partitions (fixed portions) with extruded built up standard tubular sections/appropriate 'Z' sections and other section of approved make conforming to IS-733 and IS-1285, fixing with dash fasteners of required dia and size including necessary filling up the gaps at junctions, i.e. at top bottom and sides with required EPDM rubber/neoprene gasket etc, aluminium sections shall be smooth rust free straight mitred and jointed mechanically wherever required including cleat angle, aluminium snap beading for glazing/paneling, CP brass/stainless steel screws, complete all as specified and directed.
23S&F anodised aluminium door shutters, powder coated (minimum thickness of powder coating 50 micron), aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, locking arrangement, anodised aluminium snap beading, screws etc. powder coating of any colour, complete all as specified and directed.
24S&F 4mm thick plain sheet glass, ordinary quality and glazing with oil putty in square n.exc 0.5 sqm in each pane, complete all as specified and directed.
25S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, as per specification & drawings, complete all as specified and directed.
26S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing, complete all as specified and directed.
27S&F powder coated coloured (minimum thickness of powder coating 50 micron) aluminium sliding window shutter frame comprising of 3 track sliding window made out of aluminium extruded section of bottom frame of weight not less than 1.175 kg/RM, top and side frame of weight not less than 1.174 kg/RM, the vertical styles of shutter of weight not less than 0.423 Kg/RM, top and bottom rail of shutter of weight not less than 0.336 Kg/RM, in two panel and shutter with and including 5mm thick selected quality tinted glass and third one with and including stainless steel wire mesh and overall aluminium decogrill of size 100 x 100 x 8mm as approved by GE with standard aluminium channel out side, with and including handles, cleat glazing clips, special auto lock, dry set rubber gasket, complete all as specified and directed.
28M&L for RCC (Nominal mix) (1:1.5:3) type B1 (using 20mm graded crushed stone aggregrate) as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like, complete all as specified and directed.
29M&L for RCC (1:1.5:3) (nominal mix) type A-1, (using 20mm graded crushed stone aggregate) as in beams, contilevers, bressummers, lintels over 1.5m span etc, complete all as specified and directed.
30Use & waste of formwork to sides and soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work, not exceeding 200mm thick (Horizontal or sloping), complete all as specified and directed.
31Use & waste of formwork to sides and soffits of floor or roof beams, beam haunching’s, girders, breastsummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc. fair finish flat surfaces of formwork, complete all as specified and directed.
32Use and waste of form work to sides of concrete foundations, footings, bases of columns, side of foundation and plinth beams and similar works, rough finished surfaces of concrete, complete all as specified and directed.
33Use and waste of form work to sides of retaining walls, abutments, parapets and staircase railings and similar work including attached pillasters, buttresses, etc. vertical or to batter, complete all as specified and directed.
34S & F mild steel TMT bars 10mm dia (not lass than Grade Fe-500D), cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia., or securing with clips, complete all as specified and directed.
35All as per item No 33.00 here-in before but 6mm to 8mm dia in stirrups, complete all as specified and directed.
36M&L for 20mm thick Granite (of any type) tiles, machine cut, bedded and jointed with gray cement slurry and pointed with white cement with admixture of pigment to match with shade of granite stone including grinding and polishing, over and including 15mm thick screed bed in CM (1:6), complete all as specified and directed.
37S&F rotational moulded polyethylene (HDPE) water storage tanks, (made of 100% virgin and food grade plastic), triple layered, (cylindrical vertical with closed top) ISI marked, confirming to IS 12701-1996, hoisted and fixed in position all as specified in SSR Part I (500 ltr capacity) including 20mm Nipple suitable for HDPE water tank and 20mm bore ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball, screwed for iron pipe and fixed to 20mm bore pipe inculding taking down old unserviceable water tank of any capacity, complete all as specified and directed.
38S&F door closer aluminum body (extruded section) hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000mm in width and of weight between 61 to 80 kg and fixed, complete all as specified and directed.
39S&F double action floor spring hydraulically regulated made up of minimum 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel, heavy duty, complete all as specified and directed.
40S&F EWC vitreous china wash down water closet pan, white including connection to outgoing drain and flushing pipe, anti syphonic pipe with seat and cover and flushing cistern & flush pipe including making good damged/distrubed surfaces, complete all as specified and as directed.
41S&F in repair 10 ltrs capacity low level valve less PVC syphonic action type flushing cistern white with inlet, ball valve, float and handle, complete all as specified and directed.
42S&F in repair vitreous china wash hand basin, white, pastel, flat back of size 580 x 450mm including PVC waste pipe 32mm dia, CP waste coupling including cutting for and pinning in ends of brackets etc, complete all as specified and directed.
43S & F vitreous china urinal, bowl type flat back of size 460 x 350 x 260mm white (minimum), with grating and union for discharge pipe (excluding flushing cistern, flush pipe and waste pipe) including urinal spreader, providing and fixing plugs, bedding urinal against wall in CM (1:2), securing urinal to plug with and including 60mm long brass screws, pointing around urinal back, complete all as specified and directed.
44S&F in repair sinks made of stainless steel with draining board, 1mm thick (SS-304) with plugs and wastes including in cement mortar onto dwart wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mmx160mm including waste pipe & coupling 32mm, complete all as specified and directed.
45S&F in repair 600mm x 450mm bevelled edge mirror made of selected quality sheet glass not less than 5.5mm thick, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers, complete all as specified and directed.
46S&F 15mm bore, bib tap, cast copper alloy, chromium plated, screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for brass ferrule and fixed, complete all as specified and directed.
47S&F bib tap 15mm bore cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed, complete all as specified and directed.
48S & F in repair 15mm bore gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe, complete all as specified and directed.
49S&F in repair pillar tap, 15mm bore, cast copper alloy, chromium plated, swan neck type, screwed down high pressure with or without lettered “hot’ or “ cold” with long screwed shanks and fly nuts screwed for iron pipe and fixed, complete all as specified and directed.
50S&F in repair 15mm bore angular stop valve with long shank and cup, chromium plated, cast copper alloy, concealed type, screwed down, high presure with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed, complete all as specified and directed.
51S&F in repair 125mm size, brass chromium plated shower rose with or without swivel joints, including fixing to any type of pipe or union, complete all as specified and directed.
52S & F in repair cast iron nahani trap 100mm dia with grating including jointing to waste pipe fixed in CM (1:2:4) type B2 (using 20mm graded crushed stone aggregate), complete all as specified and as directed.
53S&F in repair health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position, complete all as specified and directed.
54S&F in repair towel rail 600mm long of PTMT, fixed with and including chromium plated brass screws and wooden/plastic cleats (Minimum weight 190 gms), complete all as specified and directed
55S & F sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard and railing 60cm long, complete all as specified anddirected.
56Taking down 15mm bore steel water tubing and connection from wall /ceiling surfaces including cleaning for re-fixing or removing from site of work, complete all as specified and directed.
57Taking down 20mm bore steel water tubing and connection from wall /ceiling surfaces including cleaning for re-fixing or removing from site of work, complete all as specified and directed.
58S & F 15mm bore galvanized steel water tubing and connection, medium grade with all fittings and fixed complete to walls and ceiling or laid in floors, complete all as specified and directed.
59M&L for cutting chases on wall surface, pinning in making good to facing where required and pointing in CM (1:3) to ends to facings where required and pointing in CM (1:3) to ends or edges of landings, steps, cills , sunshades, shelves, lintel etc and cutting chases for concealed water tubing or concealed conduit wiring etc and making good as per existing surface cutting not exc 10cm girth in brick walls, complete all as specified and directed.
60S&F PVC connection 15mm size of length 450mm with PTMT nuts at both ends, complete all as specified and directed.
61S&F in repair 110mm bore, PVC (SWR), soil waste and vent pipes, in any length with cement joints fixed to wall with all necessary fixing arrangement, complete all as specified and directed.
62S&F 110mm bore, PVC (SWR) bends of any radius, complete all as specified and directed.
63Excavation in trenches not exceeding 1.5 metre wide and not exc 1.5 metre in depth for foundation or cable trenches, shafts, wells cesspits, manholes, pier holes etc. n. exc. 10 Sqm on plan and getting out in soft/loose soil, complete all as specified and directed.
64Excavation over areas not exceeding 1.5m deep and getting out in soft/loose soil, complete all as specified and directed.
65Removing excavated materials to a distance not exceeding 50 mtr and depositing where directed at a level not exceeding 1.5 metre above the starting point in any type of soil, complete all as specified and directed.
66Returning filling in incl spreading, leveling watering and well ramming in layers not exceeding 25cm in soft/loose soil, complete all as specified and directed.
67M&L for 150mm thick (compacted thickness) Granular Sub Base Course (GSB) grading as per Grade I as specified Table 400-1 of MoRTH specifications for Road and Bridge works, 2013, in a single layer over compacted subgrade with natural sand, crushed gravel, crushed stone, crushed slag or combination thereof as per the grading required. The materials are mechanically mixed, spread and leveling on the subgrade by using motor grader of adequate capacity, and rolling with vibratory roller of capacity 80-100 KN static weight for achieving required compaction density of atleast 98% of the Maximum Dry Density. Consolidating to required gradient and camber with finished surface tolerances as per Table 900-1 of MoRTH specifications for Road and Bridge works 2013, complete all as specified and directed.
68M&L for providing, laying and compacting 150mm thick (compacted thickness) Wet Mix Macadam (WMM) laid in two layers of 75mm each grading as per table 400-13 of MoRTH specifications for Road and Bridge works 2013 manufactured in WMM plant material comprising of clean, crushed, graded aggregate and granular material premixed with water to a dense mass, spreading with sensor paver and rolling with vibratory roller of capacity 80-100 KN static weight and consolidating to required gradien and camber with finished surface tolerances to be as per Table 900-1 of MoRTH specifications for Road and Bridge works 2013, complete all as specified and directed.
69M&L for providing and laying Dry lean Concrete (DLC) 150mm thick of aggregate gradation as per Table 1 of SP 49:2014 having 7 day average compressive strength not less than 7 MPa. Minimum cement content not less than 140 Kg/Cum, DLC mixed in Batching Plant, transported to site and laid by electronic sensor paver including spreading and compacting using high amplitude tamping bars of paver (initial compaction) further by double drum smooth wheeled vibratory rollers with 80-100 KN static weight to achieve minimum dry density not less than 98% of maximum Dry Density, necessary finishing etc and tolerances to be as per Table 900-1 of MoRTH specifications for road and Bridge work 2013, complete all as specified and directed.
70M&L for pavement quality concrete (PQC) of minimum 28 days field Flexural strength of 45Kg/ Sqcm or 4.5 MPa, aggregate gradation as per Table 3 of IRC 15-2017, coarse aggregate of clean, hard strong, dense, non-porous and durable pieces of crushed stone or gravel, fine aggregates of clean natural sand or crushed stone sand or combination of both using minimum 360 Kg/Cum of cement with and including non-circular virgin synthetic fibre of 12-18mm length, specific gravity 1.34 to 1.39, UV stable, alkali resistant, with equivalent dia 15-40 micron, minimum melting temperature as 240°C and minimum tensile strength of 300 MPa and at the rate as specified by the manufacturer. PQC laid, spread and compacted with slip-form paver of minimum 7.50m width, including curing and tining by Texturing cum Curing Machine, Required surface texturing to be done as specified in Clause 10.1.14 and Table 9 of IRC 15-2017, complete all as specified and directed.
71Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for, complete all as specified and directed
72M&L for hardcore of gauge not exceeding 63mm of broken stone, deposited, spread and levelled in layers not exceeding 15cm thick, watered and rammed to a true surface, complete all as specified and directed.
73M & L for PCC (1:4:8) type D2 (using 40mm graded crushed stone aggregate) for foundation, filling and mass concrete, making good to disturbed surfaces of road/hardstanding, complete all as specified and directed.
74M&L for RCC (nominal mix) (1:2:4) type B1 (using 20mm graded crushed stone aggregrate) as in foundations including rafts, footings, foundation beams, plinth beams, bases for columns, basement slabs and mass concrete, complete all as specified and directed.(Note : Reinforced shall be measured and paid separately)
75M&L for RCC (Nominal mix) (1:1.5:3) type B1 (using 20mm graded crushed stone aggregrate) as in Walls, retaining walls, basement walls, ballast walls and the like, any thickness; above top of footings; including attached pilaster and buttresses, complete all as specified and directed.
76M&L for preparation of newly plastered surfaces on ceiling and applying three coats of white wash, complete all as specified and directed.
77M & L for 100mm thick PCC (1:2:4) type B-2 (using 40mm graded crushed stone aggregate) as in floors and pavings etc, complete all as specified and directed.
78M & L for 150mm thick PCC (1:4:8) type D-2 (using 40mm graded crushed stone aggregate) as in sub bases, floors and pavings, sub floors etc, complete all as specified and directed.
79Taking down carefully copper/aluminium point wiring complete (light, fan, plug point & power complete alongwith fittings (switches, ceiling roses, tube light fittings, bulk head fitting, regulator, sockets main switches, DB removing materials to store & making good of disturb surfaces of wall/floors etc, complete all as specified and directed.
80M & L for point wiring complete with PVC insulated unsheathed, 1100 volts grade cable 1.5 Sqmm (nominal area) FRLSH type multi stranded copper conductor, single core drawn in and including concealed, rigid PVC conduit (ISI marked) not less than 20mm dia, medium grade, including all conduit accessories with and including concealed modular box of suitable size for mounting modular switch, sockets, fan regulator etc including 1.5 Sqmm FRLSH type PVC insulated unsheathed cable multi-stranded copper conductor as continuous earth wire and connected to earth dolly as required at site & including chases cutting & making good disturbed surface & applying finishes to match existing surface etc. for one light/fan point controlled by one, one way switch single pole, complete all as specified and directed.Note: - (i) Rate quoted shall deemed to be included for cost of modular box (as per number of module of outer cover) and concealed in wall including cutting and sinking of boxes and making good to the walls. (ii) Provision of blank plates as per site requirement, shall deemed to be included in the unit quoted rate.
81All as per item No 79.00 here-in before but for 3 pin 5 Amp socket point on same board, complete all as specified and directed.
82All as per item No 79.00 here-in before but for 3 pin 5 Amp socket point on independent board, complete all as specified and directed.
83All as per ser item No. 79.00 here-in before but for one bell/buzzer point controlled by one push button on the same board with other switches or independent, complete all as specified and directed.
84All as per item No 79.00 here-in before but with 4.0 Sqmm PVC insulated unsheathed multi stranded cable FRLSH type for one 3 pin/5 pin socket outlet 16 Amp, independent, including PVC insulated 4.0 Sqmm FRLSH type copper multi stranded conductor as earth wire, complete all as specified and directed.
85S&F switch piano flush type, single pole, one way 6 Amps 230 volts, complete all as specified and directed.
86S&F socket outlet flush type 2 in 1, 3 pin 6 Amp, 230 volts, complete all as specified and directed.
87S&F switch socket combination 2 in 1, 6 pin 6 Amp, 230 volts, flush type, complete all as specified and directed.
88S&F switch socket combination 3 pin 16 Amp, 230 volts, flush type, complete all as specified and directed.
89S&F ceiling rose, surface bakelite PVC/ polycarbonate, isolated body with three terminals, complete all as specified and directed.
90S&F fan regulator, electronic step type, flush type, complete all as specified and directed.
91S&F bell push, flush type, 6 Amps, complete all as specified and directed.
92S&F in repair bell electric, heavy duty, ding dong type, 240 volt, single pole, complete all as specified and directed.
93M&L for submain wiring with two single core PVC insulated unsheathed, multistranded flexible copper conductor cable, 6 sqmm, 1100 volts grade, FRLSH type, drawn through and including PVC casing caping (ISI marked) of size not less than 25mm with fixing accessories including 6 sqmm 1100 volts grade, FRLSH type, PVC insulated unsheathed multistranded flexible copper conductor cable as continuous earth wire and connecting to common earth dolly, complete all as specified and directed.Note:-Three runs of cable and one run PVC casing caping including accessories shall be measured as one length of sub main.
94M&L for submain wiring with two single core PVC insulated unsheathed, multistranded flexible copper conductor cable, 4 sqmm, 1100 volts grade, FRLSH type, drawn through and including PVC casing caping (ISI marked) of size not less than 25mm with fixing accessories including 4 sqmm 1100 volts grade, FRLSH type, PVC insulated unsheathed multistranded flexible copper conductor cable as continuous earth wire and connecting to common earth dolly, complete all as specified and directed.Note:-Three runs of cable and one run PVC casing caping including accessories shall be measured as one length of sub main.
95S&F sheet metal enclosure for double door MCB DBs, phosphatised, powder coated, Single Pole & Neutral (SPN), suitable for 4 way, 415 volts, IP 43 & IK 09 with metal door fixed on wall with din rail, neutral and earth bar, fixed in proper position, complete all as specified and directed.
96S&F sheet metal enclosure for double door MCB DBs, phosphatised, powder coated, Single Pole & Neutral (SPN), suitable for 8 way, 415 volts, IP 43 & IK 09 with metal door fixed on wall with din rail, neutral and earth bar, fixed in proper position, complete all as specified and directed.
97S&F sheet metal enclosure for double door MCB DBs, phosphatised, powder coated, Triple Pole & Neutral (TPN), suitable for 4 way, 415 volts, IP 43 & IK 09 with metal door fixed on wall with din rail, neutral and earth bar, fixed in proper position, complete all as specified and directed.
98S&F MCB TPN 40 to 63 Amps, 10 KA, 'C' curve, fixed in proper position and including connection and testing, complete all as specified and directed.
99S&F MCB SPN 40 to 63 Amps, 10 KA, 'C' curve, fixed in proper position and including connection and testing, complete all as specified and directed.
100S&F MCB SP 6 to 32 Amps, 10 KA, 'C' curve, fixed in proper position, including connection and testing complete all as specified and directed.
101S & F wall mounted LED 9 watt / 10 watt weather proof, IP 65/66 protection with electronic driver, upper PVC body including one 9/10 W LED lamp connecting up with three core flexible copper conductor cable of suitable size, complete all as specified and directed.
102S&F LED lights fitting 1x 20 W, 220V,AC , with driver, 20 watt LED rod complete connecting up with 2/3 core flexible copper conductor cable of suitable size from ceiling rose including taking down old unserviceable light fittings, complete all as specified and directed.
103S&F 600mm x 600mm LED luminaire 35/36 watt, 220 V, AC, recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size, complete all as specified and directed.
104S&F sheet metal enclosure with socket & top plug single pole and neutral encloser with a two pin and earth plug and socket complete with one double pole MCB 20 Amps, 240 V for AC starter concealed in wall/surface and making good disturbed surfaces, complete all as specified and directed.
105S&F exhaust fan, made of sturdy engineering plastic, 230v, 50Hz, RPM 1200, copper winding of 300mm sweep with blades, frame and louvers shutter including cutting wall for fixing exahaust fan and making good the opening in CM (1:3) or PCC (1:2:4) type B1 as required at site , completes all as specified and directed.
106S&F ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200mm sweep, min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) including electronic modular type regulator (2 module), completes all as specified and directed.
107S&F wall mounted air circulator fan, heavy duty, 230 volt, 300mm sweep, 1400 RPM, with all fixing arrangement on wall and connecting with and including 3 core flexible copper cable of suitable size upto ceiling rose, complete all as specified and directed.
108Supply, laying and testing cable XLPE Insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 25 sqmm 4 core including taking out old unserviceable UG cable of any type and size, complete all as specified and directed.
109Supply and laying double walled corrugated (DWC) HDPE duct pipe of 40mm dia (outer) conforming to IS, approved colour complete with fittings for cable protection, complete all as specified and directed.
110S&F electronic voltage stabilizer of capacity 5 KVA for automatic operation, single phase naturally air cooled indoor type & designed for input variation between 170 V to 250 V, 50 Hz, with output voltage stabilized at 230 V with accuracy of ± 2.5%, with digital display automatic high and low cut out with wall mounting accessories, complete all as specified and directed.
111Supply, installation, testing and commissioning of split type Air conditioning units 1.5 TR indoor and outdoor complete with cordless remote control unit and with 5 star rated/ BLDC type compressor unit with non CFC refrigerant, auto swing, LED display, noise level not more than 42 DB function, including remote, comlete with all piping arrangement etc, complete all as specified and directed. Note : (i) Condensate drain pipe of best quality to be provided and fixed in suitable manner till ground level/max up to 6.0 Mtr fixed on wall/floor/ceiling and unit quoted rate shall deemed to be included for the provision of same. (ii) The quoted rate also includes necessary fixing arragement for indoor and outdoor units and copper tubing upto 6.00 mtr length, brazing, welding including insulation, complete charging of refrigerator gas upto required level and filling the cavities on wall, setting of grill alignment.
112S&F electric water heater, stoarage type, vartical mounted rust proof ABS outer body with high quality steel inner tank and heating element upto 2 KW capacity, 25 litre, BEE 5 star rated complete with all accessories such as safety valve, thermostate, NRV including PVC connection pipe for hot/cold water to existing water lines, necessary fixing arrangement by using 50 x 5mm (max) MS plate/in built fixing arrangement as per OEM, complete all as specified and as directed.
113M&L for earthing complete with galvanized steel earth plate electrode 60cm x 60cm x 6.0mm thick buried directly in ground vertically to a depth not less than 2.25 meter below ground level with top edge of earth plate at a depth not less than 1.5 meter below ground level, earth plate surrounded by 15cm thick packed layer of charcoal dust and common salt, connected to galvanized earth lead wire 4mm thick dia by means of bolts, nuts and washers of galvanized iron or steel and thimbles and other end of the earth wire connected to earthing test point/equipment and protected by galvanized iron pipe light grade 20mm bore, up to earthing test point/equipment fixed with required number of mild steel clamp made out of 25mm x 3mm flat iron and perforated water pipe 20mm dia. GI medium grade of length 2.25 meter and top with socket & plug and bottom connected to earth plate by slit and two bolts/nuts/washers, PCC chamber in PCC (1:2:4) type B-1 and 40mm thick pre-cast RCC (1:2:4) type B-0 cover reinforcement with 40mm x 40mm x 6mm MS angle iron frame of size 25mm x 25mm, excavation & earth work complete all as shown in electrical plate No. 3 of MES Schedule Part-I of SSR-2009 connected to main switch board and testing on completion including taking out of old unserviceable earthing of any description, all as specified and directed.
114S&F LED flood light 120 watt 230 V AC outdoor type with thermal management in multiple optics and equipped with IP 65/66 protection, with impact and corrosion resistant complete with driver and lamp including taking down old unserviceable flood light, complete all as specified and directed.
115Note: An amount of Rs.12,585.00 on account of Credit Schedule for schedule 'A' part - II shall be deducted from the total amount of BOQ to arrive at the contract sum. Total in Figures 0.0 0.0 INR Zero Only 4.0 Construction of chamber for 100mm sluice plates item5 10.0 Nos Quoted Rate in Figures Select 0.0 0.0 Zero Only Quoted Rate in Words INR Zero Only Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58540942
AUTHORITY Statutory Bodies & Commissions/Committees
TENDER VALUE 42.50 Lakhs
LAST DATE 05-12-2026
Authority
Authority Name Military Engineer Services
Work Description Tender For Addition/Alteration To Mt Complex At Afs Hasimara
Basic Detail
Tender No C/8142/2026-27/E8
Bidding Type Tender
Location
City Jalpaiguri
State West Bengal
Key Dates
Publish Date 14 Nov 2026
Submission Date 05 Dec 2026
Open Date 12 Dec 2026
Finance
Tender Value 42.50 Lakhs
Tender Fee 500
EMD 85000
Exemption Available
Document List
0fc814a7-422e-4237-93b7-8e68b8db320b.html
BOQ_896179.xls
Tender8142.pdf
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 14, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Dec 05, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 13 days
Dec 12, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 20 days

Tender Documents

Download All (ZIP) ↓
html

0fc814a7-422e-4237-93b7-8e68b8db320b.html

xls

BOQ_896179.xls

pdf

Tender8142.pdf

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender