Tender For Upgradation Of providing fixing Office Record Room And Toilet Of Jogidih Po Office Under Govindpur Area
Tender Value
2.59 Lakhs
Estimated cost
Bid Submission
25 Nov 2026
3 days left
EMD
3300
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Dhanbad → Jharkhand
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Upgradation Of providing fixing Office Record Room And Toilet Of Jogidih Po Office Under Govindpur Area
BOQ
| Sl. No. | Item Description |
| 1 | Civil work |
| 2 | Dismantling roofing including ridges, hips, valleys and gutters etc., and stacking thematerial within 50 metres lead of:G.S. Sheet |
| 3 | Providing reinforced by organic fibres and/or inorganic synthetic fibres cement 6 mmthick corrugated sheets (as per IS: 14871) roofing up to any pitch and fixing with polymercoated J, or L hooks, bolts and nuts 8 mm dia. G.I. plain and bitumen washers or with selfdrilling fastener and EPDM washers etc. complete (excluding the cost of purlins, raftersand trusses), including cutting sheets to size and shape wherever required |
| 4 | Structural steel work riveted, bolted or welded in built up sections, trusses and framedwork, including cutting, hoisting, fixing in position and applying a priming coat ofapproved steel primer all complete |
| 5 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622(thickness to be specified by the manufacturer), of approved make, in all colours, shadesexcept burgundy, bottle green, black of any size as approved by Engineer-in-Charge, inskirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement :3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointingin white cement mixed with pigment of matching shade complete. |
| 6 | Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to bespecified by the manufacturer) of 1st quality conforming to IS : 15622 of approved makein colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cementmortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqmincluding pointing the joints with white cement and matching pigment etc., complete. |
| 7 | Providing and applying white cement based putty of average thickness 1 mm, of approvedbrand and manufacturer, over the plastered wall surface to prepare the surface even andsmooth complete |
| 8 | Distempering with dry distemper of approved brand and manufacture (one or more coats)and of required shade on old work to give an even shade. |
| 9 | Providing and fixing aluminium work for doors, windows, ventilators and partitions withextruded built up standard tubular sections/ appropriate Z sections and other sections ofapproved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of requireddia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom andsides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall besmooth, rust free, straight, mitred and jointed mechanically wherever required includingcleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steelscrews, all complete as per architectural drawings and the directions of Engineer-incharge.(Glazing, paneling and dash fasteners to be paid for separately) : For fixed portionAnodised aluminium (anodised transparent or dyed to required shade according to IS:1868, Minimum anodic coating of grade AC 15) |
| 10 | Providing and fixing aluminium work for doors, windows, ventilators and partitions withextruded built up standard tubular sections/ appropriate Z sections and other sections ofapproved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of requireddia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom andsides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall besmooth, rust free, straight, mitred and jointed mechanically wherever required includingcleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steelscrews, all complete as per architectural drawings and the directions of Engineer-incharge.(Glazing, paneling and dash fasteners to be paid for separately)For shutters of doors, windows & ventilators including providing and fixing hinges/ pivotsand making provision for fixing of fittings wherever required including the cost of EPDMrubber / neoprene gasket required (Fittings shall be paid for separately)Anodised aluminium (anodised transparent or dyed to required shade according to IS:1868, Minimum anodic coating of grade AC 15) |
| 11 | Providing and fixing glazing in aluminium door, window, ventilator shutters and partitionsetc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawingsand the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid inbasic item): With float glass panes of 4.0 mm thickness (weight not less than 10kg/sqm) |
| 12 | Brick work with clay fly ash FPS(Non modular) brick of class designation 7.5 in superstructure above plinth level up to floor 5 level in CM 1:6(1 cement:6 coarse sand) |
| 13 | 12 mm cement plaster of mix 1:6 (1 cement : 6fine sand) |
| 14 | Finishing walls with water proofing cement paint of required shadOld work (one or more coats @ 2.20 kg/10 sqm) complete. |
| 15 | Painting with synthetic enamel paint of approved brand and manufacture of requiredcolour to give an even shade :One or more coats on old work |
| 16 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mmC.P. brass waste of standard pattern, including painting of fittings and brackets, cuttingand making good the walls wherever requireWhite Vitreous China Wash basin size 630x450 mm with a single 15 mm C.P. brass pillartap |
| 17 | Providing and fixing mirror of superior glass (of approved quality) and of required shapeand size with plastic moulded frame of approved make and shade with 6 mm thick hardboard backingOval shape 450x350 mm (outer dimensions) |
| 18 | Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sandcast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe,with manually controlled device (handle lever) conforming to IS : 7231, with all fittingsand fixtures complete, including cutting and making good the walls and floors whereverrequired:White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type footrests each 4897.5 |
| 19 | Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 :15 mm nominal bore |
| 20 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermalstability for hot & cold water supply, including all CPVC plain & brass threaded fittings,including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes &fittings with one step CPVC solvent cement and testing of joints complete as per directionof Engineer in Charge. Internal work - Exposed on wall25 mm nominal outer dia Pipes |
| 21 | Dismantling tile work in floors and roofs laid in cement mortar including stacking materialwithin 50 metres lead. For thickness of tiles 10 mm to 25 mm |
| 22 | Total impact of GST for the purpose of CTC Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 16, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 25, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 3 daysNov 27, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 5 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender