Tender For Repairing And Maintenance Of Quarter No 460,461,444 At Mehtadih Under Govindpur Area
Tender Value
5.63 Lakhs
Estimated cost
Bid Submission
25 Nov 2026
3 days left
EMD
7100
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Dhanbad → Jharkhand
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repairing And Maintenance Of Quarter No 460,461,444 At Mehtadih Under Govindpur Area
BOQ
| Sl. No. | Item Description |
| 1 | Civil work |
| 2 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means infoundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), includingdressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out theexcavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil |
| 3 | Dismantling old plaster or skirting raking out joints and cleaning the surface for plasterincluding disposal of rubbish to the dumping ground within 50 metres lead |
| 4 | Demolishing brick work manually/ by mechanical means including stacking of serviceablematerial and disposal of unserviceable material within 50 metres lead as per direction ofEngineer-in-charge In cement mortar |
| 5 | Brick work with clay fly ash FPS(Non modular) brick of class designation 7.5 in foundation and plinth CM 1:6(1 cement:6 coarse sand) |
| 6 | Brick work with clay fly ash FPS(Non modular) brick of class designation 7.5 in superstructure above plinth level up to floor 5 level in CM 1:6(1 cement:6 coarse sand) |
| 7 | brick flat soling |
| 8 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundationsetc. in layers not exceeding 20cm in depth, consolidating each deposited layer by rammingand watering, lead up to 50 m and lift upto 1.5 m. |
| 9 | Providing and laying in position cement concrete of specified grade excluding the cost ofcentering and shuttering - All work up to plinth level :1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources: 4 graded stoneaggregate 20 mm nominal size derived from natural sources). |
| 10 | 12 mm cement plaster of mix 1:6 (1 cement : 6fine sand) |
| 11 | Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate)finished with a floating coat of neat cement, including cement slurry, but excluding thecost of nosing of steps etc. complete.40 mm thick with 20 mm nominal size stone aggregate |
| 12 | 12 mm cement plaster of mix 1:4 (1 cement : 4fine sand) |
| 13 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS :12701 marked, with cover and suitable locking arrangement and making necessary holesfor inlet, outlet and overflow pipes but without fittings and the base support for tank |
| 14 | Providing and fixing 1mm thick MS Sheet door with frame 40x40x6 mm angle ironall necessary fittings complete |
| 15 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622(thickness to be specified by the manufacturer), of approved make, in all colours, shadesexcept burgundy, bottle green, black of any size as approved by Engineer-in-Charge, inskirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement :3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointingin white cement mixed with pigment of matching shade complete. |
| 16 | Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to bespecified by the manufacturer) of 1st quality conforming to IS : 15622 of approved makein colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cementmortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqmincluding pointing the joints with white cement and matching pigment etc., complete |
| 17 | Providing & fixing White vitreous china water closet squatting pan (Indian type) alongwith \\"S\\" or \\"P\\" trap including dismantling of old WC seat and \\"S\\" or \\"P\\" trap at sitecomplete with all operations including all necessary materials, labour and disposal ofdismantled material i/c malba, all complete as per the direction of Engineer-in chargeOrissa pattern W.C Pan of size 580x440 mm |
| 18 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming toIS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10mm gap for thermal expansion, (i) Single socketed pipes 110 mm diameter |
| 19 | Finishing walls with water proofing cement paint of required shadeOld work (one or more coats @ 2.20 kg/10 sqm) complete. |
| 20 | Distempering with dry distemper of approved brand and manufacture (one or more coats)and of required shade on old work to give an even shade. |
| 21 | Painting with synthetic enamel paint of approved brand and manufacture of requiredcolour to give an even shade : One or more coats on old work |
| 22 | Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch ofcorrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coatedthickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns.Sheet should have protective guard film of 25 microns minimum to avoid scratches duringtransportation and should be supplied in single length upto 12 metre or as desired byEngineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size(5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curvedsurfaces, excluding the cost of purlins, rafters and trusses and including cutting to size andshape wherever required. |
| 23 | Providing reinforced by organic fibres and/or inorganic synthetic fibres cement 6 mmthick corrugated sheets (as per IS: 14871) roofing up to any pitch and fixing with polymercoated J, or L hooks, bolts and nuts 8 mm dia. G.I. plain and bitumen washers or with selfdrilling fastener and EPDM washers etc. complete (excluding the cost of purlins, raftersand trusses), including cutting sheets to size and shape wherever required |
| 24 | Structural steel work riveted, bolted or welded in built up sections, trusses and framedwork, including cutting, hoisting, fixing in position and applying a priming coat ofapproved steel primer all complete |
| 25 | uPVC pipe internal work uPVC SCH 40 as per ASTM 50 25 mm nominal outer dia pipes |
| 26 | Total impact of GST for the purpose of CTC Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 16, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 25, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 3 daysNov 27, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 5 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender