Tender For Repairing Of Quarter No C 31 At Guest House Colony Sinidih Under Govindpur Area
Tender Value
1.22 Lakhs
Estimated cost
Bid Submission
25 Nov 2026
8 days left
EMD
1600
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Dhanbad → Jharkhand
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repairing Of Quarter No C 31 At Guest House Colony Sinidih Under Govindpur Area
BOQ
| Sl. No. | Item Description |
| 1 | Civil work |
| 2 | Distempering with 1st quality acrylic distember (Ready mix) having VOC content lessthan 50 grams/ litre of approved brand and manufacture to give an even shade :Old work (one or more coats) |
| 3 | Painting with synthetic enamel paint of approved brand and manufacture of requiredcolour to give an even shade :One or more coats on old work |
| 4 | 25 mm thick cement concret flooring |
| 5 | 12 mm cement plaster of mix 1:6 (1 cement : 6fine sand) |
| 6 | 18 mm cement plaster in two coats under layer 12 mm thick cement plaster 1:5 (1 cement :5 coarse sand) finished with a top layer 6 mm thick cement plaster 1:6 (1 cement : 6 finesand). |
| 7 | Removing dry or oil bound distemper, water proofing cement paint and the like byscrapping, sand papering and preparing the surface smooth including necessary repairs toscratches etc. complete |
| 8 | Providing and fixing P.V.C. low level flushing cistern with manually controlled device(handle lever) conforming to IS : 7231, with all fittings and fixtures complete.10 litre capacity - White |
| 9 | Providing and fixing white vitreous china wash basin including making all connections butexcluding the cost of fittings : Flat back wash basin of size 630x450 mm |
| 10 | Providing and fixing PTMT bib cock of approved quality and colour.15mm nominal bore, 86 mm long, weighing not less than 88 gms |
| 11 | Providing and fixing PTMT swivelling shower, 15 mm nominal bore, weighing not lessthan 40 gms |
| 12 | providing and ixing hand shower with 8 mm dia 1 mtr long flexible tube and wall hook of hindware with code ALD CHR 573 or equivalent as per instruction of engineer in charge |
| 13 | Providing and fixing 2 way bib coak with wall flange of hinsware with code f740004 |
| 14 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. wastefittings complete semi rigid pipe 32 mm dia each 76.15 |
| 15 | Providing and fixing ISI marked M.S. pressed butt hinges bright finished with necessaryscrews etc. complete : 125x65x2.12 mm |
| 16 | Providing and fixing ISI marked oxidised M.S. sliding door bolts with nuts and screws etc.complete : 300x16 mm |
| 17 | Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992 withnecessary screws etc. complete :125 mm |
| 18 | Providing and fixing ISI marked oxidised M.S. tower bolt black finish, (Barrel type) withnecessary screws etc. complete :250x10 mm |
| 19 | Providing and fixing factory made uPVC white colour sliding glazed window upto 1.50 min height dimension comprising of uPVC multi-chambered frame with in-built roller trackand sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steelsection made from roll forming process of required length (shape & size according touPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVCextruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touchlocks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessarystainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded atall corners, including drilling of holes for fixing hardware's and drainage of water etc.After fixing frame the gap between frame and adjacent finished wall shall be filled withweather proof silicon sealent over backer rod of required size and of approved quality, allcomplete as per approved drawing & direction of Engineer-in-Charge. (Single / doubleglass panes, wire mesh and silicon sealent shall be paid separately). Variation in profiledimension in higher side shall be accepted but no extra payment on this account shall bemade.Two track two panels sliding window made of (small series) frame 52 x 44 mm &sash 32x 60 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead ofappropriate dimension. (Area of window upto 1.75 sqm) |
| 20 | Structural steel work riveted, bolted or welded in built up sections, trusses and framedwork, including cutting, hoisting, fixing in position and applying a priming coat ofapproved steel primer all complete. |
| 21 | Total impact of GST for the purpose of CTC Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 16, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 25, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 8 daysNov 27, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 10 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender