Rural Development Local Bodies Closing in 15 days TDR #58540301

Tender For Renovation And Interior Work At 3Rd Floor Meeting Room Under Howrah Municipal Corporation(Part - B)

Issued by Local Bodies · Howrah, West Bengal
Tender Value
22.85 Lakhs
Estimated cost
Bid Submission
02 Dec 2026
15 days left
EMD
45715
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Howrah → West Bengal
EMD Exemption
Not Available
Quantity
Not Available

Project Description

Tender for Renovation And Interior Work At 3Rd Floor Meeting Room Under Howrah Municipal Corporation(Part - B)

BOQ

Name of Work:- RENOVATION AND INTERIOR WORK AT 3RD FLOOR MEETING ROOM UNDER HOWRAH MUNICIPAL CORPORATION(PART - B)
Sl. No. Item Description
1Providing and fixing cupboard shutter with 19 mm thick one sidedecorative and other side balancing lamination factory pressed BWP grade marine ply as per IS 710 of approved brand including 2 mm thick PVC edge banding tape with hot glue by edge bending machine etc. with auto closing spring loaded hinges (hydraulic type) etc. complete as per direction of Engineer-in-charge. (Payment of providing and fixing auto closing hinges shall be paid separately)(IT.NO. - 9.168, PAGE NO.- 167)CPWD(2023)
2Providing and fixing in wall lining flat pressed three layer (medium density) particle board or graded wood Pre-laminated one side decorative lamination and other side balancing lamination Grade I, Type II, IS : 12823 marked, including priming coat on unexposed arrangement andscrews etc. complete :12 mm thick(IT.NO. - 8.26.1, PAGE NO.- 132)CPWD(2023)
3Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters.25 mm thick (for cupboard) including ISI marked nickelplated bright finished M.S. Piano hinges IS : 3818 markedwith necessary screws(IT.NO. - 9.20.3, PAGE NO.- 138)CPWD(2023)
4Providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot & double acting hydraulic floor spring type fixing arrangement and making necessary holes etc. for fixing required door fittings, all complete as per direction of Engineer-in-charge (Door handle, lock and stopper etc.to be paid separately).(IT.NO. - 21.18, PAGE NO.- 300)CPWD(2023)
5Providing and fixing to existing door frames.24 mm thick factory made PVC door shutters made of styles and rails of a uPVC hollow section of size 59x24 mm and wall thickness 2 mm (± 0.2 mm) with inbuilt edging on bothsides. The styles and rails mitred and joint at the corners bymeans of M.S. galvanised/ plastic brackets of size 75x220mm having wall thickness 1.0 mm and stainless steelscrews. The styles of the shutter reinforced by insertinggalvanised M.S. tube of size 20x20 mm and 1 mm (± 0.1mm) wall thickness. The lock rail made up of ‘H’ section, auPVC hollow section of size 100x24 mm and 2 mm (± 0.2mm) wall thickness, fixed to the shutter styles by means ofplastic/galvanised M.S. ‘U’ cleats. The shutter frame filledwith a uPVC multi-chambered single panel of size not lessthan 620 mm, having over all thickness of 20 mm and 1 mm(± 0.1 mm) wall thickness. The panels filled vertically and tiebar at two places by inserting horizontally 6 mm galvanisedM.S. rod and fastened with nuts and washers, complete asper manufacturer’s specification and direction of Engineerin-charge. (For W.C. and bathroom door shutter).(IT.NO. - 9.118.1, PAGE NO.- 149)CPWD(2023)
6Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings and fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc.25 mm nominal dia Pipes(IT.NO. - 18.8/18.8.3, PAGE NO.- 258)CPWD(2023)
7Providing and fixing vitreous china dual purpose closet suitable for use assquatting pan or European type water closet (Anglo Indian W.C pan) with seat & lid fixed with C.P. brass hinges and rubber buffers, 10 litre low level flushing cistern with fitting and brackets, 40 mm flush bend, 20 mm over flow pipe, with specials of standard make and mosquito proof couplingof approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required:White vitreous china dual purpose WC pan with white solidplastic seat and lid with white vitreous china flushing cisternand C.P. flush bend.(IT.NO. - 17.68/17.68.1, PAGE NO.- 253)CPWD(2023)
8Stainless Steel AISI-304(18/8) Wash basin 530x345 mm withsingle 15 mm C.P. brass pillar tap(IT.NO. - 17.7/17.7.11, PAGE NO.- 244)CPWD(2023)
9White Vetrious China Waterless Urinal of size 600x330x315 mm(IT.NO. - 7074, PAGE NO.- 40)CPWD(2023)
10French spirit polishing :Two or more coats on new works including a coat of wood filler(IT.NO. - 13.68/13.68.1, PAGE NO.- 205)CPWD(2023)
11Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete.(IT.NO. - 9.88, PAGE NO.- 145)CPWD(2023) Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58540301
AUTHORITY Local Bodies
TENDER VALUE 22.85 Lakhs
LAST DATE 02-12-2026
Authority
Authority Name Urban Local Bodies
Work Description Tender for Renovation And Interior Work At 3Rd Floor Meeting Room Under Howrah Municipal Corporation(Part - B)
Basic Detail
Tender No WB-21/TN/ED/EOB/26-27
Bidding Type Tender
Location
City Howrah
State West Bengal
Key Dates
Publish Date 14 Nov 2026
Submission Date 02 Dec 2026
Open Date 05 Dec 2026
Finance
Tender Value 22.85 Lakhs
Tender Fee Ref. Documents
EMD 45715
Exemption Not Available
Document List
BOQ_2568448.xls
e9a9c257-139c-4a4c-bb67-54e54fab1ae4.html
Tendernotice_1.pdf
Tendernotice_2.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 14, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Dec 02, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 15 days
Dec 05, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 18 days

Tender Documents

Download All (ZIP) ↓
xls

BOQ_2568448.xls

html

e9a9c257-139c-4a4c-bb67-54e54fab1ae4.html

pdf

Tendernotice_1.pdf

pdf

Tendernotice_2.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender