Tender For Renovation Of Road(Right Site Of Main Gate) And Drain By Paver Block Pavement Under Howrah Municipal Corporation
Tender Value
23.49 Lakhs
Estimated cost
Bid Submission
02 Dec 2026
13 days left
EMD
46989
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Howrah → West Bengal
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Renovation Of Road(Right Site Of Main Gate) And Drain By Paver Block Pavement Under Howrah Municipal Corporation
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling of Flexible Pavements Dismantling of flexible pavements and disposal of dismantled materials up to a lead of 1000 metres, stacking serviceable and unserviceable materials separately (Reference to MoRT&H's specification clause 202)5(II) By Mechanical Means5(II)A Bituminous course(Ref. CHAPTER-2, IT-5 ,Page-75 of N.H Schedule of Rates 2019-2020) |
| 2 | Brick masonry work with 1st class full size bricks except when necessary to complete the bond in cement morter 1:3 in foundation complete, including thoroughly soaking the bricks in a tank filled with water for a minimum period of one hour prior to being laid, protecting the green structure from rain by suitable covering and with a minimum Seven days curing etc., but excluding pointing and plastering, as per drawing and Technical Specifications.(Reference to MORT&H's specifications 1300 & 2200). Cement Mortar1:4 (1cement :4 sand)P-183, I- 5 |
| 3 | Plastering with cement mortar (1:3) on brick work in sub-structure complete all including raking out joints curing, etc as per Technical Specifications (Reference to MORT&H's specifications 1300 & 2200). VIDE P-219, I- 3 N.H Schedule of Rates 2019-2020 |
| 4 | Plain/Reinforced cement concrete in sub-structure complete all including vibrating and compacting, finishing, curing, sampling, testing etc. by mechanically mixed as per drawing and Technical Specifications (Reference to MORT&H's specifications 1500, 1700 & 2200).5E RCC Grade M20Using concrete MixerVIDE P-221, I- 5 N.H Schedule of Rates 2019-2020 |
| 5 | Construction of cement concrete kerb with channel with top and bottom width 115 and 165 mm respectively, 250 mm high in M 20 grade PCC on M15 grade foundation 150 mm thick, kerb channel 300 mm wide, 50 mm thick in PCCM20 grade,sloped towards the kerb, kerb stone with channel laid with kerb laying machine, foundation concrete laid manually, all complete as per clause 409 (Reference to MORT&H's specification 409). N.H Schedule of Rates 2019-2020(VIDE P-141, I- 2) |
| 6 | Concrete Block PavementSupplying and Laying in the particular pattern of cement concrete block pavements with BIS certification and spacer nib of size and shape with aspect ratio as per IS 15658 with cement concrete grade not less than M40 on the prepared base course of specified CBR as mentioned in design and drawing with a cushion of bedding sand of 30 to 50 mm thick (grading of the bedding sand as per clause 6.5.1 of IRCSP-63) and filling up the gaps between two paver block with joint filling sand (the grading of the joint filling sand will be as per clause 6.5.2) complete as per IRC SP - 63 with proper confinement of bedding and joint filling sand, compaction,levelling and filling up of the edge gaps with mortar. Type I, II,III, IV should be as per design requeirment or instruction of E-I-C.(Ref. Sr. No. B-3 of Chapter-17,Page-3 of 2nd Addenda of N.H Schedule of Rates 2019-2020 |
| 7 | ILLUSTRATION FOR ANALYSIS OF GSB Grade IIBy Mix in Place MethodConstruction of granular sub-base by providing graded materials such as natural sand/crushed gravel/crushed stone/combination depending upon the required grading , spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator and compacting with vibratory roller to achieve at least 98% of the maximum dry density for the material determined as per IS:2720 (Part 8), complete as per clause 401 desired density, complete as per clause 401for grading-II Material (VIDE P-99, I- 1B) N.H Schedule of Rates 2019-2020 |
| 8 | ADD 18 % G.S.T |
| 9 | ADD 1% CESS Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 14, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedDec 02, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 13 daysDec 05, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 16 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender