Rural Development Local Bodies Closing in 9 days TDR #58540285

Tender For Repairing Of Commissioner Chamber And Chairman Office Including Other Allied Works At Town Hall Under Howrah Municipal Corporation.

Issued by Local Bodies · Howrah, West Bengal
Tender Value
4.96 Lakhs
Estimated cost
Bid Submission
02 Dec 2026
9 days left
EMD
9932
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Howrah → West Bengal
EMD Exemption
Not Available
Quantity
Not Available

Project Description

Tender for Repairing Of Commissioner Chamber And Chairman Office Including Other Allied Works At Town Hall Under Howrah Municipal Corporation.

BOQ

Name of Work:- Repairing of Commissioner Chamber and Chairman office including other allied works at Town Hall under Howrah Municipal Corporation.
Sl. No. Item Description
1Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. In cement mortar CPWD Vol-II P-239 It-15.7.4
2Renewing wooden beams in roofs including making good the holes in walls and painting with oil type wood preservative of approved brand and manufacture complete, including removal of rubbish to the dumping ground, all complete as per direction of Engineer-in-Charge.Not exceeding 4.00 metres in length. Sal wood beams CPWD Vol-II P-230 It-14.16.1.1
3Supplying, fitting and fixing boiling water resistant ply conforming to IS: 710-1977 bonded with phenol formaldehyde synthetic resin conforming to IS: 848-1974 of approved make and brand fitted and fixed as per design as per approval and direction of Engineer-in-Charge.(excluding the cost of supporting frame work and teak wood batten/Lipping) In Ground Floorvi)19mm
4(iv)12mm
5ii) 6mm[Ref : P.W.D.(Bldg.), Page-173, Item-3(vi,iv,ii)]
6Supplying fitting, fixing decorative lamination conforming to IS: 2046 : 1995 as per approved make, brand, finish and thickness with fitting, fixing the same on Particle/MDF / Ply Boards with recommended / approved adhesive with proper clipping the sides for better attachment as per direction of Engineer-incharge. The rate includes the cost of labour, adhesive and all incidental charges thereof.In ground floorGlossy/Matt/Suede excluding surface texture or metallic lustre.(i) Thickness of laminate 1.5 mm[Ref : P.W.D.(Bldg.), Page-179, Item-14(i)]
7Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20 mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete.Size of Tile 600x600 mmSize of Tile 600x600 mmCPWD Vol-II P-194 It-11.41.2
8Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) Powder coated aluminium (minimum thickness of powder coating 50 micron)Natural whiteCPWD Vol-II P-325 It-21.1.2.2
9Providing and fixing false ceiling at all heights with integral densified calcium silicate reinforced with fibre and natural filler false ceiling tiles of Size 595x595 mm of approved texture, design and patterns having NRC (Noise Reduction coefficient) of 0.50 (minimum) as per IS 8225:1987, Light reflectance of 85% (minimum). Non combustible as per BS:476 (part-4), fire performance as per BS:476 (part 6 &7), humidity resistance of 100%, thermal conductivity < 0.043 W/m K as per ASTM 518:1991, in true horizontal level suspended on inter-locking metal powder coated T-Grid of hot dipped galvanised iron section of 0.40 mm thick on Silhouette profile,rotary stiched double webbed white with 6 mm reveal profile (white/ black),comprising of main-T runners of size 15x42 mm of length 3000 mm, cross - T of size 15x42 mm of length 1200 mm and secondary.intermediate cross-T of size 15x42 mm of length 600 mm to form grid module of size 600 x 600 mm, suspended from ceiling using galvanised mild steel items (galvanizing @ 80 grams per sqm) i.e. 50 mm long, 8 mm outer diameter M-6 dash fasteners, 6 mm dia fully threaded hanger rod upto 1000 mm length and L-shape level adjuster of size 85x25x2 mm. Galvanised iron perimeter wall angle of size 22x19x0.40 mm of length 3000 mm to be fixed on periphery wall / partition with the help of plastic rawl plugs at 450 mm center to center and 40 mm long dry wall S.S screws. The work shall be carried out as per specifications, drawing and as per directions of the Engineer-in-ChargeWith 15 mm thick integral densified micro edge light weight calcium silicate false ceiling tiles CPWD Vol-II P-360 It-26.23.1
10Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound ) content.With water thinnable cement primer on wall surface having VOC content less than 50 grams/litre CPWD Vol-II P-223 It-13.85.3
11Distempering with 1st quality acrylic distemper (ready mixed) having VOC (Volatile Organic Compound ) content less than 50 gram/ litre, of approved brand and manufacturer including applying additional coats wherever required to achieve even shade and colour CPWD Vol-II P-223 It-13.81
12Vertical Blind[Market Rate]
13Providing and fixing ISI marked aluminium butt hinges anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade with necessary screws etc. complete: 100x75x4 CPWD Vol-I P-158 It-9.95.3
14Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. completeCPWD Vol-I P-157 It-9.83
15Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete : 100 mm CPWD Vol-I P-158 It-9.100.2
16Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete. CPWD Vol-I P-157 It-9.82
17Providing and fixing ISI marked oxidised M.S. tower bolt black finish, (Barrel type) with necessary screws etc. complete (Copper oxidised as per IS 1378) 250x10 mmCPWD Vol-I P-155 It-9.63
18Renewing glass panes and refixing existing wooden fillets Float glass panes of nominal thickness 5 mm (weight not less than 12.5kg/sqm) CPWD Vol-II P-229 It-14.7.2
19Providing, supplying, fitting and fixing 4 mm thick Aluminium Composite Panel (ACP) cladding/paneling on existing MS supporting frame, consisting of 3 mm FR-grade mineral core sandwiched between two aluminium sheets each 0.5 mm thick, exterior grade and PVDF/fluoropolymer coated, including cutting to required size, edge preparation, drilling, providing necessary cleats/brackets, stainless steel screws, bolts, nuts, washers, spacer tape, weather/structural sealant, backer rods and all other necessary accessories, fixing the ACP panels to the MS supporting frame, maintaining proper alignment, level and uniform joints, including all labour, transportation, loading/unloading, handling, tools and tackles, wastage and cleaning of completed work, complete as per approved drawing, manufacturer's specifications,and as directed by the Engineer-in-Charge . Rate Analysis
20Melamine polishing on wood work (one or more coat).CPWD Vol-II P-225 It-13.114
21Labour (Beldar) for material shiftingCPWD Vol-II P-7 It-0114
22Supplying fitting & fixing of Decorative Carpet with Foam[Market Rate] Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58540285
AUTHORITY Local Bodies
TENDER VALUE 4.96 Lakhs
LAST DATE 02-12-2026
Authority
Authority Name Urban Local Bodies
Work Description Tender for Repairing Of Commissioner Chamber And Chairman Office Including Other Allied Works At Town Hall Under Howrah Municipal Corporation.
Basic Detail
Tender No WB-19/TN/ED/EOB/26-27
Bidding Type Tender
Location
City Howrah
State West Bengal
Key Dates
Publish Date 14 Nov 2026
Submission Date 02 Dec 2026
Open Date 05 Dec 2026
Finance
Tender Value 4.96 Lakhs
Tender Fee Ref. Documents
EMD 9932
Exemption Not Available
Document List
6142936a-57fa-4d98-9cf1-b9d9e5220694.html
BOQ_2568428.xls
Tendernotice_1.pdf
Tendernotice_2.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 14, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Dec 02, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 9 days
Dec 05, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 12 days

Tender Documents

Download All (ZIP) ↓
html

6142936a-57fa-4d98-9cf1-b9d9e5220694.html

xls

BOQ_2568428.xls

pdf

Tendernotice_1.pdf

pdf

Tendernotice_2.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender