Tender For Repair/Maintenance/Servicing Of Pumps Motors, Motor Starter Control Panels, Valves Of Various Installations With Connected Misc Works Under Age E/M -Ii In Ge (C) Khadki.
Tender Value
48 Lakhs
Estimated cost
Bid Submission
07 Dec 2026
15 days left
EMD
96000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Pune → Maharashtra
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair/Maintenance/Servicing Of Pumps Motors, Motor Starter Control Panels, Valves Of Various Installations With Connected Misc Works Under Age E/M -Ii In Ge (C) Khadki.
BOQ
| Sl. No. | Item Description |
| 1 | Material and labour for disconnecting and taking down carefully Electric driven pumping set of capacity upto 15HP (motor and pump) from foundation, disconnecting suction and discharge water line for carrying out repair work of pump set, dismantling of pump set, cleaning, repair replacement of all unserviceable parts, reassembling complete pumping set, reinstalling , mounting and fixing on base channel on existing foundation and coupling properly to existing motor with proper balancing and alingment including recoupling of suction and discharge line, testing on full load for smooth functioning all as specified and as directed.NOTE :-(i) Rates including minor spares like gland, grease, nut bolts and major spares will be measured and paid separately and rate quoted shall be deemed to be included for fixing of new spares under these items. (ii) Contractor should visit site before quoting the rates. (iii) Cost of transportation shall be deemed to be included in the rate quoted for these items. (iv) While taking out pump for repairs , the contractor will make arrengement pluging suction and discharge line with dead flanges without extra cost, so that pumping of installation is not disturbed and there is no leakage of water. (v) The contractor shall repair and refix the pump set within three working days from the date of opening and making it functionable . |
| 2 | Description all as per item No. 1.00 but of capacity 30HP all as specified and directed. |
| 3 | Description all as per item No. 1.00 but of capacity 60HP |
| 4 | Description all as per item No. 1.00 but of capacity 75HP |
| 5 | Supply only following spare/parts of pump set for incorporate in the Item Ser No 1.00 to 4.00 above all as specified and as directed:- |
| 6 | Pressure gauge suitable for 15 HP to 75 HP Pump Set with appropriate size in dia at delivery line to proper measurement of PSI with 15mm valve & connector all as specified and as directed. |
| 7 | MS shaft for pump of capacity 60 HP |
| 8 | Impeller MS/CI suitable for pump of capacity 60 HP |
| 9 | MS geard coupling with suitable size of key for pump of capacity 60 HP |
| 10 | Gasket set suitable suitable for pump of capacity 60 HP |
| 11 | Gland bush (shaft sleeves)suitable for pump of capacity 60 HP |
| 12 | Gland Plates suitable for pump of capacity 60 HP |
| 13 | Brass Distance bush suitable for pump of capacity 60 HP |
| 14 | MS shaft suitable for pump of capacity upto 15 HP |
| 15 | Impeller bush brass suitable for pump of capacity upto 15 HP |
| 16 | Impeller MS/CI suitable for pump of capacity upto 15 HP |
| 17 | coupling (As per sample) suitable for pump of capacity upto 15 HP |
| 18 | Gasket set suitable suitable for pump of capacity upto 15 HP |
| 19 | Gland plates MS (As per sample) suitable for pump of capacity upto 15 HP |
| 20 | Gland bush / Shaft sleeve (As per sample) suitable for pump of capacity upto 15 HP |
| 21 | MS shaft suitable for pump of capacity 30 HP |
| 22 | Impeller bush brass suitable for pump of capacity 30 HP |
| 23 | Impeller MS/CI suitable for pump of capacity 30 HP |
| 24 | coupling (As per sample) suitable for pump of capacity 30 HP |
| 25 | Gasket set suitable suitable for pump of capacity 30 HP |
| 26 | Gland plates MS (As per sample) suitable for pump of capacity 30 HP |
| 27 | Gland bush / Shaft sleeve (As per sample) suitable for pump of capacity 30 HP |
| 28 | MS shaft suitable for pump of capacity 75 HP |
| 29 | Impeller bush brass suitable for pump of capacity 75 HP |
| 30 | Brass Impeller suitable for pump of capacity 75 HP |
| 31 | Gasket set suitable suitable for pump of capacity 75 HP |
| 32 | Gland bush /Shaft sleeve (As per sample) suitable for pump of capacity 75 HP |
| 33 | MS Coupling suitable for pump of capacity 75 HP |
| 34 | Bearing No. NU-308/309/310/313 for electric motor & pump |
| 35 | Bearing No. 6313/6310/6314 for electric motor & pump |
| 36 | Bearing No. 3309 for electric motor & pump |
| 37 | Material and labour for disconnection/dismantling of electric motor 3 Phase, 415 Volt, from installation & transporting to workshop for rewinding , taking out old unserviceable burnt winding and rewinding the same with super enamelled copper wire of same guage/size to get the same output of motor including material such as varnish, sleeves, leothariod paper etc and refixing the same in position with proper alignment, balancing and testing of capacities 10/15 HP all as specified and as directed. |
| 38 | Description all as per item No 6.00 above but of capacity 30 HP |
| 39 | Description all as per item No 6.00 above but of capacity 60 HP |
| 40 | Description all as per item No 6.00 above but of capacity 75 HP Please Enable Macros to View BoQ information |
| 41 | Description all as per item No 6.00 above but of capacity 75 HP Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 14, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedDec 07, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 15 daysDec 09, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 17 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender