Tender For Repair/Maint Of 1000 Kva Transformer Ht Bushing, Dehydration & Top Up Of Transformer Oil, Cable Joint At 512 Abw Mrs Under Aor Of Under Aor Of Age E/M-Ii Of Ge (C ) Khadki
Tender Value
Ref. Documents
Estimated cost
Bid Submission
21 Nov 2026
2 days left
EMD
Ref. Documents
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Pune → Maharashtra
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair/Maint Of 1000 Kva Transformer Ht Bushing, Dehydration & Top Up Of Transformer Oil, Cable Joint At 512 Abw Mrs Under Aor Of Under Aor Of Age E/M-Ii Of Ge (C ) Khadki
BOQ
| Sl. No. | Item Description |
| 1 | JOB WORK : REPAIR/MAINT OF 1000 KVA TRANSFORMER HT BUSHING, DEHYDRATION & TOP UP OF TRANSFORMER OIL, CABLE JOINT AT 512 ABW MRS UNDER AOR OF UNDER AOR OF AGE E/M-II OF GE (C ) KHADKI(a) M&L for disconnecting HT XLPE cable of any size from transformer for finding fault, defect rectification HT cable laid in trenches or any location by locating fault with the help of electronic fault locating machine comprising of surge generator pulse, ECHO fault locator with high frequency distance calculator etc. including taking out defective cable from ground and additional excavation in normal or any type of strata required for exposing the cable fault. Removal of deteriorated portion of cable treating of cable and keeping the same ready for jointing work all as specified and as directed by Engr-in-Charge at site.- 01 Each Job.(b) M&L in repairs HT heat shrinkable indoor type end termination cable jointing kit suitable for 22 KV, 3 core 95 Sqmm XLPE aluminium conductor cable including disconnecting of cable and removing of old jointing kit complete all as specified and as directed. - 01 Each Job.(c) M & L for Dehydration incl filtration and cleaning of 1000 KVA transformer oil by dehydrating machine incl testing before and after of sample at 2.5 mm gap to achieve suitable break down voltage limit minimum 50 KV after dehydration and filtration all as specified and directed . Note: (i) Contractor to arrange the dehydration machine, testing kit and make arrangement for electric supply without any extra cost. 01 Each Job. |
| 2 | (d) M&L for New Filling / top up transformer oil as per IS: 335 of low viscosity having dielectric strength not less than 60 KV, all as specified and as directed. Note: Dielectric strength test should be carried out at site before poring/filling in transformers in the as directed by Engr-in-Charge.- 150 Ltrs.(e) Supply and fixing HT bushing with brass spindle nut bolt washers etc for 1000 KVA transformer as per existing size and shape including reactification of transformer oil leakage complete all as directed by Engr-in-Charge - Each Set - 01.(f) M&L labour for epoxy painting of transformer HT side bushing box surrounding inside area and repair of damage sheet with welding and required GI sheet complete all as directed by Engr-in-Charge. Each job - 01 .(g) M&L for carrying out magnetic balance test of existing distribution transformer of 22 KV/ 433 Volt capacity, including isolation of transformer from HT and LT supply, disconnection of cables, testing of three phases (R, Y & B) by applying suitable single phase AC Voltage at HT terminals and measuring the included voltages in the respective phases, recording and analysing the test results to ascertain the condition of transformer core and windings. The test shall be carried out by using a calibrated digital voltmeter and suitable testing all connection shall be restored to their original position and transformer shall be made ready for normal operation, complete as directed by Engr-in-Charge. Each Job - 01. |
| 3 | Note: 1. Old retrieved materials will be contractor’s property; hence, sch of credit Rs 380.00 already deducted in the rate analysis.2. GST % amount to be shown separately. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 14, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 21, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 2 daysNov 23, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 4 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender