Tender For Special Repair To Road At Mt Driver Trg At Army Ad Centre Under Ge(I) Gos
Tender Value
Ref. Documents
Estimated cost
Bid Submission
05 Dec 2026
13 days left
EMD
88000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Ganjam → Odisha
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Special Repair To Road At Mt Driver Trg At Army Ad Centre Under Ge(I) Gos
BOQ
| Sl. No. | Item Description |
| 1 | List of works |
| 2 | Scarifying or picking gravelled, macadam or bituminous macadam surfaces in areas not exc 400 sqm and not exc. 50 mm deep and not exc 150 mm deep complete all as specified |
| 3 | M&L 150 mm thick (compacted thickness) WMM laid in two equal layers each 75mm thick (compacted thickness) using approved stones aggregate of grading -2(90mm to 40 mm ) size, spread, watered rolled and consolidated to required gradient and camber with 8 to 12 tonne power road roller etc complete all as specified & directed. |
| 4 | M&L Preparing Unsurfaced water bound macadam surfaces by brushing with wire brushes for removing caked mud etc., sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc. |
| 5 | M&L for applying evenly a priming/tack coat with bituminous primer at 10 kg per 10 sq metre of paving bitumen (VG-10) complete all as specified and directed. |
| 6 | M&L for premixed bituminous macadam with 4% binder paving bitumen (VG-30) content by wt. of total mix laid/ rolled and compacted to required gradient and camber consolidated thickness 75 mm thickness or less, and rolled with power roller 8 to 10 Ton complete all as specified and directed.Note:- Job Mix formula as per MORTH Specification shall be got done from the accredited Govt's approved lab and cost there on shall be born by the contractor. Bitumen content indicated in description shall be minimum however actual requirement of bitumen binder in plus side shall be as per Job Mix formula. Work shall be executed after approval of Job Mix formula by GE. |
| 7 | M&L for Preparing existing blacktop surfaces by brushing with wire brushes for removing caked mud etc. sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc.complete all as specified and directed. |
| 8 | M&L for applying evenly a priming/tack coat with bituminous primer at 5 kg per 10 sq metre of paving bitumen (VG-10) complete all as specified and directed. |
| 9 | M&L for laying bituminous premix semi dense asphaltic concrete with 5.5% binder content 40mm consolidated thickness by weight of total mix, rolled and compacted to required camber and gradient complete using paving bitumen (VG-30) any penetration (SDAC shall be laid with mechanical paver and rolled with 8-10 Ton tandom power roller) complete all as specified and directed.Note :(a) Hot rolling to be carried out through Tandom roller and when temprature fallen upto 60 degree centigrate rolling to be carried out through Pneumatic Tyre (PTR) for filling of voids and better compaction.(b)Job Mix formula as per MORTH Specification shall be got done from the accredited Govt's approved lab and cost there on shall be born by the contractor. Bitumen content indicated in description shall be minimum however actual requirement of bitumen binder in plus side shall be as per Job Mix formula. Work shall be executed after approval of Job Mix formula by GE. |
| 10 | Supply and fixing cat eye solar reflective type of metal body alloy of size 100mm x 100mm x 20mm with PAMA striplens reflector of model No. DA 972.0 fixed with and incl MS stud of suitable size as per manufactures instructions. |
| 11 | M & L for preparing bituminous surfaces of road and marking 2 mm thick centre lines, stop lines, dashes, arrows etc. and the like n. exc 10cm wide on roads pavements with hot applied thermo plastic road marking paint of approved colour confirming to BS 3262-1989 with special applicator machine all as per manufacturers instruction complete all as specified and directed. |
| 12 | Moorum / Red bajri filling in floors or pavings, as in both sides of road laid in layers n.exc15 cm thick spread levelled and rammed incl watering etc all as specified & directed. |
| 13 | S&F in repair ABS Body encased, 100 cm outdoor convex mirror fixed in road/ground portion complete including hanging/fixing arrangement with adequate mounting arrangement at suitable height including 3.0mtr long and 75 mm dia MS pipe as stand fixed with ABS frame, ,including excavation for post holes, PCC block of size 45x45x50cm of PCC 1:2:4 type B-1 (Using 20mm graded crushed stone aggregate) and including necessary excavation earth work and removal of soil to a distance n. exc. 50m complete all as specified and as directed. |
| 14 | S&F in repair Sparkle road side delinators with tri color reflector and 150mm wide reflecto radium sticker pasted over painted MS pipes approx 100mm dia and 100 cm long fixed in cement concrete bedding 150mm x 150mm x 300 mm , 1:3:6 type C-1 (using 20 mm graded aggregate incl necessary earth work complete all as specified. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 14, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedDec 05, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 13 daysDec 07, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 15 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender