Tender For Repair/Resurfacing Of Internal Roads, Interlocking Path/Hardstanding, Berms And Road Furniture Under Age B/R-Ii Of Ge (East) Mathura
Tender Value
60 Lakhs
Estimated cost
Bid Submission
12 Dec 2026
23 days left
EMD
1.15 Lakhs
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Mathura → Uttar Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair/Resurfacing Of Internal Roads, Interlocking Path/Hardstanding, Berms And Road Furniture Under Age B/R-Ii Of Ge (East) Mathura
BOQ
| Sl. No. | Item Description |
| 1 | M&L for repairs to pot holes, not exc 1 square metre each, including sweeping free from dust and mud, or water, scoring sunken surfaces in roads, cutting around edges to at least 25 mm in depth, on existing road surfaces, and making good applying evenly a tack coat of paving bitumen primer of grade VG-10 at the rate of 05 Kg per 10 Sqm, putting in premixed bituminous macadam, well rammed and sealed with binder 9.8 Kg per 10 sqm of paving bitumen (VG-30), blinded with 0.09 Cum of stone chippings, 6.3 mm size and again well rammed including supply of premixed macadam, binder and chipping, depth of pot holes exc 30mm, complete all as specified and as directed.Note : Pot holes shall be marked and checked by Engineer-in-Charge. 100% quantity before commencement of work and shall also be entered in MB with reference to permanent objects before starting carpating of work. Job mix formula of premix bituminous macadam shall be approved by GE. |
| 2 | Material, Laying and compacting 150 mm thick (compacted thickness) Wet Mix Mecadam (WMM) laid in single layer grading as per Table 400-13 of MoRTH specification for road and bridge works 2013 manufactured in WMM plant, material comprising of clean crushed graded aggregate and granular material premixed with water to a dense mass, spreading with sensor paver and rolling with vibratory roller of capacity 80-100 KN static weight and consolidating to required gradient and camber including scarifying or picking gravelled, macadam or bituminous macadam surfaces in area exc 400 sqm, depth not exceeding 50 mm complete all as specified and as directed. The finished surfaces tolerence to be as per Table 900-1 of MoRTH specification for road and bridge works 2013. |
| 3 | M&L for applying evenly a priming/tack coat of paving bitumen primer of grade VG-10 at the rate of 10 Kg per 10 Sqm of surface by sprayer operated on hot pressure mechanism complete all as specified and as directed. |
| 4 | M&L for preparing black top bituminous surfaces by brushing with wire brushes for removing caked mud etc., sweeping with brooms and finally fanning the cleaned surfaces with air compressor through air jet to remove all loose dirt including removing mud etc to distance minimum 1.50m from adge of road and applying evenly a tack coat of paving bitumen primer of grade VG-10 at the rate of 05 Kg per 10 Sqm of road surface by sprayer operated on hot pressure mechanism, providing, laying, spreading 30mm thick (consolidated thickness) of premix Semi Dense Asphaltic Concrete (SDAC) with 0.406 cum crushed and graded coarse aggregate as per design based on Job mix formula with 5.5% bitumen binder content (bitumen of Grade VG-30) by weight of total mix including heating bitumen to the required temperature, mixing bituminous concrete in automatic and temperature controlled hot mixing plant, laying, spreading uniformly by means of Mechanical paver all as specified in clause device for automatic leveling and profile control within the specified tolerance of SSR Part-I, rolling and consolidating to the required gradient and camber with 8 to 12 tonne power road roller and Vibromax roller to a uniform smooth surfaces complete all as specified and as directed.Notes : (i) The work shall be executed as per design mix approved by GE. (ii) Paving bitumen primer of Grade VG-10 for tack coat and bitumen of Grade VG-30 for semi dense asphaltic concrete shall be used and shall be procured by the contractor under his own arrangement and at his own cost. (iii) Cost of all the materials, T&P, labour etc. required for preparation of surfaces, applying tack coat, providing and laying semi dense asphaltic concrete including procurement of bitumen as specified here-in-before, stone aggregates & sand etc., rolling and all other elements required for entire completion of the job shall be deemed to be included in the unit rate quoted for this item. (iv) Bituminous concrete shall be mixed in drum type hot mix plant, transported from plant to work at site and laid/spread by means of mechanical paver finisher. (v) Filler for bitumen concrete shall be OPC grade @ 2% of total mix. (vi) Contractor shall quote his rate on the basis of binder as mentioned in this item. If there is any minus variation in the actual binder content used as per design mix approved by GE, the rate shall be adjusted as per invoice submitted by the contractor per Kg of binder used. However no price adjustment shall be made if the binder content works out to more than as specified in this item. |
| 5 | M&L for providing, laying, spreading upto 75mm or less consolidated thickness of premix bituminous macadam carpet filling in depression (using 20mm graded stone aggregate) in single layer with using mechanical paver using bituminous binder (VG-30) at the rate 4% by weight of total mix including heating bitumen to the required temperature, mixing bituminous macadam in automatic and temperature controlled hot mixing plant, rolling and consolidating to the required gradient and camber with 8 to 12 tonne power road roller complete all as specified and as directed.Notes : (i) Job mix formula of premix bituminous macadam shall be approved by GE. (ii) Aggregates for bituminous works shall confirm to clause No 20B 2.5 of SSR 2009 Part-I (Specifications) with the following constraints :-Aggregates passing 26.5mm IS Seive - 100%Aggregates passing 13.2mm IS Seive - 60% to 80%Aggregates passing 4.75mm IS Seive - 20% to 30%Aggregates passing 2.36mm IS Seive - 5% to 10% |
| 6 | M&L for painting lines, dashes, arrows letter, marking etc of 3mm thick film on new surface or previously treated road surface with hot applied retro-reflective thermo plastic exc 10cm wide n exc 15cm wide road marking paint (white/golden/yellow) conforming to MORTH (Clause 803.4) all as specified with 8% glass beads using special applicator machine with heating arrangement upto 160° C including cleaning and drying the existing road surface to ensure dust, oil, grease and moisture free surface before applying the paint complete all as specified and as directed. |
| 7 | Supply & fixing cat eye (road stud) of size 110 x 128 x 30mm, two way reflective, aluminium alloy body, Red or Amber colour, including dismantling and taking out old unserviceable / broken road stud of any type complete all as specified and as directed. |
| 8 | S&F Solar Stud of size 125mm x 125mm x 25mm (shank 65 mm), aluminium alloy shell, electronically operated automatically turns ON at night and turns OFF at day, high efficiency mono crystalline solar panel 2.4 V / 0.3 Watt, one Ni-Mh or Ni-Cd rechargeable battery (1.2 V / 1600 MA), six super bright LEDs with 10000 to 18000 mcd (Millicandela), view distance upto 1000m, flash rate 2 Hz, capable to withstand weight upto 10 tonne, unbreakable poly carbonate clear facing designed for maintenance free operation, 100% water proof design according to IP-65, Red or Amber colour, including dismantling and taking out old unserviceable / broken solar stud of any type complete all as specified and as directed. |
| 9 | M&L for 75 mm thick cement concrete (1:4:8) type D2 using 40 mm graded crushed stone aggregate as in sub floors, sub bases, floors and paving etc complete all as specified and directed. |
| 10 | M&L for providing and laying 80mm thick factory made chamfered edge cement concrete paver block of M-30 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of coarse sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand including dismantling interlocking tiles/PCC or existing floors, stone slabs complete all as specified & as directed. |
| 11 | M&L for Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement : 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as specified & as directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 14, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedDec 12, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 23 daysDec 19, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 30 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender