Tender For Construction Work Of Shivala Culvert And Access Road On Mansaita Drain Under Magh Mela Area In Prayagraj District.
Tender Value
2.10 Crore
Estimated cost
Bid Submission
20 Nov 2026
1 days left
EMD
12.50 Lakhs
Bank guarantee accepted
Document Fee
2714
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Prayagraj → Uttar Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Work Of Shivala Culvert And Access Road On Mansaita Drain Under Magh Mela Area In Prayagraj District.
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in excavation of foundation of sturcture sas per drawing and technical specification, including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom and backfilling with approved material. as per direction of Engineer in charge. |
| 2 | Running 5 HP diesel pumps for dewatering, including suction and delivery pipe, with cost of labour including operator and POL etc complete in all respect, as per direction of Engineer-in-charge, including all lead, lift and delift, with carriage and other T&P charges required for proper completion as per S.O.R. & as per direction of Engineer in Charge. |
| 3 | Sand Filling in foundation Trenches as per Drawing and Technical specifications clause 305.3.9 & as per direction of Engineer in Charge. |
| 4 | Plain/reinforced concrete M15 in open foundations complete as per drawing and Technical Specifications clause 802, 803, 1202 & 1203 & as per direction of Engineer in Charge. |
| 5 | Plain/reinforced concrete M20 in open foundations complete as per drawing and Technical Specifications clause 802, 803, 1202 & 1203 & as per direction of Engineer in Charge. |
| 6 | Plain/reinforced concrete M20 in sub structures complete as per drawing and Technical Specifications clause 802, 804, 805, 806, 807, 1202 & 1204 & as per direction of Engineer in Charge. |
| 7 | P/L reinforced cement concrete M20 in super structures complete as per drawing and Technical Specifications clause 800,1205.4 & 1205.5 & as per direction of Engineer in Charge. |
| 8 | Providing and Laying Reinforced cement concrete Approach Slab M 30 grade excluding reinforcement complete as per drawing and Technical Specifications & as per direction of Engineer in Charge. |
| 9 | Supplying, fitting and placing HYSD bars reinforcement in super structures complete as per Drawing and Technical Specifications. Clause 1002, 1010 & 1202 & as per direction of Engineer in Charge. |
| 10 | Providing and laying filter media with granular crushed aggregate as per specification to a thickness not less than 600 mm with smaller sizes towards the soil and bigger sizes towards wall and providing the over entire surface behind abutment, wing wall, return wall to the full height , compacted to firm conditions complete as per Drawing and Technical Specification Clause 1204.3.8 & as per direction of Engineer in Charge. |
| 11 | Back filling behind abutment ,wing wall, return wall complete as per Drawing and Technical Specification Clause 1204.3.8 & as per direction of Engineer in Charge. |
| 12 | Providing Weep holes in brick masonry/stone masonry, plain/reinforced concrete abutments, wing wall, return wall with 100 mm dia AC/PVC pipe extending full width of structure with slope of 1(V):20(H) towards drawing face complete as per Drawing and Technical Specification Clause 614, 709,1240.307 & as per direction of Engineer in Charge. |
| 13 | Boulder Apron (Laid dry)Providing and laying boulders apron on river bed for protection against scour with stone boulders weighing not less than 40 kg. each complete as per drawing and technical specifications No. 2503 & as per direction of Engineer in Charge. |
| 14 | Providing and applying 2 coats of water based cement paint to unplastered concrete surface after cleaning the surface of dirt, dust, oil, grease, efflorescence and applying paint @ 1 liter for 2 sqm. (As per DSR 13.44.1) & as per direction of Engineer in Charge. |
| 15 | Construction of granular sub-base by providing close graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with vibratory roller to achieve the desired density, complete as per clause 401. Excluding cost of GST & as per direction of Engineer in Charge. |
| 16 | Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers with grader in sub- base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density & as per direction of Engineer in Charge. |
| 17 | Construction of un-reinforced, dowel jointed, plain cement concrete pavement over a prepared sub base with 43 grade cement @ 310 kg per Cum, coarse and fine aggregate conforming to IS 383, maximum size of coarse aggregate not exceeding 25 mm, mixed in a batching and mixing plant as per approved mix design, transported to site, laid with a fixed form or slip form paver, spread, compacted and finished in a continuous operation including provision of contraction, expansion, construction and longitudinal joints, joint filler, separation membrane, sealant primer, joint sealant, debonding strip, dowel bar, tie rod, admixtures as approved, curing compound, finishing to lines and grades as per drawing & as per direction of Engineer in Charge. |
| 18 | Construction of embankment with approved material obtained from Roadway Cutting or borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacting to meet requirement of table 300-2 & as per direction of Engineer in Charge. |
| 19 | Construction of sub-grade and earthen shoulders with approved material obtained from Right of way with all lifts & leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of table No. 300-2 & as per direction of Engineer in Charge. |
| 20 | Brick masonry work in 1:3 in sub-structure complete excluding pointing and plastering, as per drawing and Technical Specifications & as per direction of Engineer in Charge. |
| 21 | Providing and Laying of Zig-Zag rubber moulded Interlocking Concretet Block Pavement having thickness 80 mm as per drawing and Technical Specification Clause 1504 of MORTH Specification. (For New) & as per direction of Engineer in Charge. |
| 22 | Supply and laying of a 1000 mm diameter Hume pipe for diversion purposes during the execution period of this box culvert. After completion of the box culvert work, the contractor will dismantle the diversion, clear the waterway, and take ownership of the Hume pipe into their custody & as per direction of Engineer in Charge. |
| 23 | Providing and laying Filter material underneath pitching in slopes complete as per drawing and Technical specification MORTH 2504 Sr no. 16.05 & as per direction of Engineer in Charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 14, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 20, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 1 dayNov 20, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 1 dayTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender