Railways Government Departments Closing in 20 days TDR #58539603

Supply Of Primary Spring Bars

Issued by Government Departments · Chennai, Tamil Nadu
Tender Value
Ref. Documents
Estimated cost
Bid Submission
07 Dec 2026
20 days left
EMD
20 Lakhs
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Chennai → Tamil Nadu
EMD Exemption
Not Available
Quantity
25

Project Description

Supply Of primary spring bars , peeled, ground, straightened and magna flux crack tested spring steel round barssiz e 26mm diameter x 3195 mm long, grade 52 cr mo v4 (according to iso 683 pt.-14)as per fiat technical specification no.t.s.17.248, part document 100 version 05with amendment no.1 of october 2004. sulp hur and phosphores must not exceed 0.015%. the tolerance in diameter shall be within +/- 0.05mm a nd tolerance in length shall be within +10.0mm, -0.0mm. the conditions given in rsk specification no . 2k01 of may 2005, item no.1,2, 2.5, 3.2, 4, 5 and 7 will also be applicable. technical specification will be governed by rdso specification no. wd-01-hls-1994 (rev.3- january 2009) or latest alteration. 3.2, 4, 5 and 7 will also be applicable. [ warranty period: 30 months after the date of delivery ] [quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lac s ] ] , peeled, ground, straightened and magna flux crack tested spring steel round bars siz e 27 mm diameter x 3204 mm long, grade 52crmov4 as per rdso specn. rdso/2017/cg-01, rev-03----. the t olerance in diameter shall be within +/- 0.05 mm and tolerance in length shall be within +10.0 mm, - 0.0 mm. the conditions given in rsk specification no. 2k01 of may 2005, clause no. 2.5, 3.2, 4, 5 and 7 wi ll also be applicable. [ warranty period: 30 months after the date of delivery ] [quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lac s ] ] , peeled, ground, straightened and magna flux crack tested spring steel round bars siz e 40mm diameter x 3730 mm long, grade 52 cr mo v4 (according to iso 683 pt.-14) as per fiat technical specification no.t.s.17.248, part document 100 version 05 with amendment no.1 of october 2004. sul phur and phosphores must not exceed 0.015%. the tolerance in diameter shall be within +/- 0.05mm and tolerance in length shall be within +10.0mm, -0.0mm. the conditions given in rsk specification n o. 2k01 of may 2005, item no.1,2, 2.5, 3.2, 4, 5 and 7 will also be applicable. technical specification wil l be governed by rdso specification no. wd-01-hls-1994 (rev.3- january 2009) or latest alteration. [ warranty period: 30 months after the date of delivery ] [quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lac s ] ] , peeled, ground, straightened and magna flux crack tested spring steel roundbarssize 38mm diameter x 3680 mm long, grade 52 cr mo v4 (according to iso 683pt.-14)as per fiat technical sp ecification no.t.s.17.248, part document 100version 05with amendment no.1 of october 2004. sulphu r and phosphores must notexceed 0.015%. the tolerance in diameter shall be within +/- 0.05mm andt olerance in length shall be within +10.0mm, -0.0mm. the conditions given in rskspecification no. 2k0 1 of may 2005, item no.1,2, 2.5, 3.2, 4, 5 and 7 willalsobe applicable. technical specification will be go verned by rdsospecificationno. wd-01-hls-1994 (rev.3- january 2009) or latest alteration. no. 2.5, 3.2 , 4, 5 and 7 will also be applicable. [ warranty period: 30 months after the date of delivery ] [quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lac s ] ]

BOQ

Sl. No.Item Description
1PEELED, GROUND, STRAIGHTENED AND MAGNA FLUX CRACK TESTED SPRING STEEL ROUND BARSSIZ E 26MM DIAMETER X 3195 MM LONG, GRADE 52 Cr Mo V4 (ACCORDING TO ISO 683 PT.-14)AS PER FIAT TECHNICAL SPECIFICATION NO.T.S.17.248, PART DOCUMENT 100 VERSION 05WITH AMENDMENT NO.1 OF OCTOBER 2004. SULP HUR AND PHOSPHORES MUST NOT EXCEED 0.015%. THE TOLERANCE IN DIAMETER SHALL BE WITHIN +/- 0.05MM A ND TOLERANCE IN LENGTH SHALL BE WITHIN +10.0MM, -0.0MM. THE CONDITIONS GIVEN IN RSK SPECIFICATION NO . 2K01 OF MAY 2005, ITEM NO.1,2, 2.5, 3.2, 4, 5 AND 7 WILL ALSO BE APPLICABLE. TECHNICAL SPECIFICATION WILL BE GOVERNED BY RDSO SPECIFICATION NO. WD-01-HLS-1994 (REV.3- JANUARY 2009) OR LATEST ALTERATION. 3.2, 4, 5 AND 7 WILL ALSO BE APPLICABLE. [ Warranty Period: 30 Months after the date of delivery ] [Quantity Tolerance (+/-): 5 %age , Item Category : Normal , Total PO value variation Permitted: Max 8 lac s ] ]
2PEELED, GROUND, STRAIGHTENED AND MAGNA FLUX CRACK TESTED SPRING STEEL ROUND BARS SIZ E 27 MM DIAMETER X 3204 MM LONG, GRADE 52CrMoV4 AS PER RDSO SPECN. RDSO/2017/CG-01, Rev-03----. THE T OLERANCE IN DIAMETER SHALL BE WITHIN +/- 0.05 MM AND TOLERANCE IN LENGTH SHALL BE WITHIN +10.0 MM, - 0.0 MM. THE CONDITIONS GIVEN IN RSK SPECIFICATION NO. 2K01 OF MAY 2005, CLAUSE NO. 2.5, 3.2, 4, 5 AND 7 WI LL ALSO BE APPLICABLE. [ Warranty Period: 30 Months after the date of delivery ] [Quantity Tolerance (+/-): 5 %age , Item Category : Normal , Total PO value variation Permitted: Max 8 lac s ] ]
3PEELED, GROUND, STRAIGHTENED AND MAGNA FLUX CRACK TESTED SPRING STEEL ROUND BARS SIZ E 40MM DIAMETER X 3730 MM LONG, GRADE 52 Cr Mo V4 (ACCORDING TO ISO 683 PT.-14) AS PER FIAT TECHNICAL SPECIFICATION NO.T.S.17.248, PART DOCUMENT 100 VERSION 05 WITH AMENDMENT NO.1 OF OCTOBER 2004. SUL PHUR AND PHOSPHORES MUST NOT EXCEED 0.015%. THE TOLERANCE IN DIAMETER SHALL BE WITHIN +/- 0.05MM AND TOLERANCE IN LENGTH SHALL BE WITHIN +10.0MM, -0.0MM. THE CONDITIONS GIVEN IN RSK SPECIFICATION N O. 2K01 OF MAY 2005, ITEM NO.1,2, 2.5, 3.2, 4, 5 AND 7 WILL ALSO BE APPLICABLE. TECHNICAL SPECIFICATION WIL L BE GOVERNED BY RDSO SPECIFICATION NO. WD-01-HLS-1994 (REV.3- JANUARY 2009) OR LATEST ALTERATION. [ Warranty Period: 30 Months after the date of delivery ] [Quantity Tolerance (+/-): 5 %age , Item Category : Normal , Total PO value variation Permitted: Max 8 lac s ] ]
4PEELED, GROUND, STRAIGHTENED AND MAGNA FLUX CRACK TESTED SPRING STEEL ROUNDBARSSIZE 38MM DIAMETER X 3680 MM LONG, GRADE 52 Cr Mo V4 (ACCORDING TO ISO 683PT.-14)AS PER FIAT TECHNICAL SP ECIFICATION NO.T.S.17.248, PART DOCUMENT 100VERSION 05WITH AMENDMENT NO.1 OF OCTOBER 2004. SULPHU R AND PHOSPHORES MUST NOTEXCEED 0.015%. THE TOLERANCE IN DIAMETER SHALL BE WITHIN +/- 0.05MM ANDT OLERANCE IN LENGTH SHALL BE WITHIN +10.0MM, -0.0MM. THE CONDITIONS GIVEN IN RSKSPECIFICATION NO. 2K0 1 OF MAY 2005, ITEM NO.1,2, 2.5, 3.2, 4, 5 AND 7 WILLALSOBE APPLICABLE. TECHNICAL SPECIFICATION WILL BE GO VERNED BY RDSOSPECIFICATIONNO. WD-01-HLS-1994 (REV.3- JANUARY 2009) OR LATEST ALTERATION. NO. 2.5, 3.2 , 4, 5 AND 7 WILL ALSO BE APPLICABLE. [ Warranty Period: 30 Months after the date of delivery ] [Quantity Tolerance (+/-): 5 %age , Item Category : Normal , Total PO value variation Permitted: Max 8 lac s ] ]

AI Tender Summary

OUR REF NO 58539603
AUTHORITY Government Departments
TENDER VALUE Ref. Documents
LAST DATE 07-12-2026
Authority
Authority Name Integral Coach Factory
Work Description Supply Of primary spring bars , peeled, ground, straightened and magna flux crack tested spring steel round barssiz e 26mm diameter x 3195 mm long, grade 52 cr mo v4 (according to iso 683 pt.-14)as per fiat technical specification no.t.s.17.248, part document 100 version 05with amendment no.1 of october 2004. sulp hur and phosphores must not exceed 0.015%. the tolerance in diameter shall be within +/- 0.05mm a nd tolerance in length shall be within +10.0mm, -0.0mm. the conditions given in rsk specification no . 2k01 of may 2005, item no.1,2, 2.5, 3.2, 4, 5 and 7 will also be applicable. technical specification will be governed by rdso specification no. wd-01-hls-1994 (rev.3- january 2009) or latest alteration. 3.2, 4, 5 and 7 will also be applicable. [ warranty period: 30 months after the date of delivery ] [quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lac s ] ] , peeled, ground, straightened and magna flux crack tested spring steel round bars siz e 27 mm diameter x 3204 mm long, grade 52crmov4 as per rdso specn. rdso/2017/cg-01, rev-03----. the t olerance in diameter shall be within +/- 0.05 mm and tolerance in length shall be within +10.0 mm, - 0.0 mm. the conditions given in rsk specification no. 2k01 of may 2005, clause no. 2.5, 3.2, 4, 5 and 7 wi ll also be applicable. [ warranty period: 30 months after the date of delivery ] [quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lac s ] ] , peeled, ground, straightened and magna flux crack tested spring steel round bars siz e 40mm diameter x 3730 mm long, grade 52 cr mo v4 (according to iso 683 pt.-14) as per fiat technical specification no.t.s.17.248, part document 100 version 05 with amendment no.1 of october 2004. sul phur and phosphores must not exceed 0.015%. the tolerance in diameter shall be within +/- 0.05mm and tolerance in length shall be within +10.0mm, -0.0mm. the conditions given in rsk specification n o. 2k01 of may 2005, item no.1,2, 2.5, 3.2, 4, 5 and 7 will also be applicable. technical specification wil l be governed by rdso specification no. wd-01-hls-1994 (rev.3- january 2009) or latest alteration. [ warranty period: 30 months after the date of delivery ] [quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lac s ] ] , peeled, ground, straightened and magna flux crack tested spring steel roundbarssize 38mm diameter x 3680 mm long, grade 52 cr mo v4 (according to iso 683pt.-14)as per fiat technical sp ecification no.t.s.17.248, part document 100version 05with amendment no.1 of october 2004. sulphu r and phosphores must notexceed 0.015%. the tolerance in diameter shall be within +/- 0.05mm andt olerance in length shall be within +10.0mm, -0.0mm. the conditions given in rskspecification no. 2k0 1 of may 2005, item no.1,2, 2.5, 3.2, 4, 5 and 7 willalsobe applicable. technical specification will be go verned by rdsospecificationno. wd-01-hls-1994 (rev.3- january 2009) or latest alteration. no. 2.5, 3.2 , 4, 5 and 7 will also be applicable. [ warranty period: 30 months after the date of delivery ] [quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lac s ] ]
Basic Detail
Tender No 03262721
Bidding Type Tender
Location
City Chennai
State Tamil Nadu
Key Dates
Publish Date 14 Nov 2026
Submission Date 07 Dec 2026
Open Date 01 Jan 0001
Finance
Tender Value Ref. Documents
Tender Fee Ref. Documents
EMD 20 Lakhs
Exemption Not Available
Document List
5788435.pdf
5789292.pdf
5789336.pdf
5789363.pdf
5789375.pdf
5789377.pdf
5947327.pdf
fce7f69b-dfaa-4fb5-8ad0-84abd406f14d.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 14, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Dec 07, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 20 days

Tender Documents

Download All (ZIP) ↓
pdf

5788435.pdf

pdf

5789292.pdf

pdf

5789336.pdf

pdf

5789363.pdf

pdf

5789375.pdf

pdf

5789377.pdf

pdf

5947327.pdf

pdf

fce7f69b-dfaa-4fb5-8ad0-84abd406f14d.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender