Power Boards / Undertakings / PSU Closing in 17 days TDR #58534520

Bids Are invited for Custom Bid For Services - Installation Of Structural Supports And Shielding Walls Erection Of Embedded Pipelines And Hook Up Of Existing Potentially Active Process Pipelines Inspection And Testing Works In The Radioactive Area At

Issued by Boards / Undertakings / PSU · Mumbai Suburban, Maharashtra
Tender Value
80.10 Lakhs
Estimated cost
Bid Submission
07 Dec 2026
17 days left
EMD
1.60 Lakhs
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Gem

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Mumbai Suburban → Maharashtra
EMD Exemption
Available
Quantity
1

Project Description

Bids Are invited for Custom Bid For Services - Installation Of Structural Supports And Shielding Walls Erection Of Embedded Pipelines And Hook Up Of Existing Potentially Active Process Pipelines Inspection And Testing Works In The Radioactive Area At Wip Trombay - Platform Fabrication For Maintenance Of Piping Gadgets, Pipe Line Protection Structures With Walkway Using Ss 304/Mild Steel Material & Insulation Protection Structure Ss304 Channels, Ss304 Angles, Ss304 Plates For Piping And Equipment Installation Works , Procurement, Testing (From Nabl Approved Lab) And Inspection Of Ms Raw Materials And Further Preparation & Approval Of Drawing, Fabrication, Dp Testing, Inspection, Descaling, Shot Blasting, Painting And Installation Of 25Mm Thick Portable Shielding Walls For Piping Gadgets And Associated System. , Hook-Ups With Existing Potentially Active Pipelines In The Form Of A Butt Welding (Gtaw) And In-Cell But Welding With Radiography Quality For Ss304l Pipes & Pipe Fittings Of Different Size Using High Purity Argon Gas (99.995% Min) For Shielding & Back Purging With Good Quality Of Water-Soluble Purge Dam Paper Followed By Liquid Penetrant Examination For Root & Final Weld, Local Passivation Of The Weld Joints, Permanent Marking Of The Joint Number, Line Testing, Air Flushing & Line Tracing As Per Approved Procedure And Technical Specifications. , Fillet Welding (Gtaw) In Radioactive Area For All Stainless Steel Pipelines Using High Purity Argon Gas (99.995% Min) For Shielding & Back Purging Followed By Liquid Penetrant Examination For Root & Final Weld And Final Approval Of These Welds After Pressure Testing Shall Be Carried Out As Per Tender Technical Specification. , Radiography Of Butt Welding Joints In Radioactive Area On The Basis Of Relevant Standards And Approved Procedure As Per Attached Tender Technical Specifications. , Erection, Installation, Supporting ( Utilizing Ss/ Ms Structural Members Such As Angles, Channels, Beam Etc.), Testing And Commissioning Of Ss304l Piping In Sizes From 8 Mm Nb To 200 Mm Nb [This Work Involves Identification Of Existing Pipelines, Piping Spool/ Nozzles Of Equipment Inside The Cell, Taking Site Measurements Inside And Outside The Cell, Incorporating The Required Changes In Ga Drawings, Preparation & Approval Of Pipe Spool Drawings Prior To Any Fabrication Activity, Identification Of All Materials, Taking Delivery Of The Same From Departmental Stores, Complete Handling, Transportation, Cleaning, Detergent Washing, Pickling & Passivation, Iron And Chloride Contamination Checks, Rinsing, Marking, Cutting Of Pipes And Edge Preparation, Fabrication Of Ss Pipe Bends With 5D And More Radius With Lpe, Fit-Up, Tack Welding, Full Welding With Lpe, Alignment, Maintaining Slope, Line Tagging, Weld Joint Tagging, Supporting, Local Passivation Of Weld Joint, Pneumatic Testing Of Lines, Complete Erection, Preparation Of As Built Drawings Etc. And Readying The Same For Gtaw Welding As Per Approved Spool Drawings]. Pressure Testing Of All Pipe Lines & Embedded Plugs/Pipe Eps During Commissioning Shall Also Be In The Scope Of The Supplier. Additionally, The Work Shall Also Involve Erection Of Eic Approved Safe Working Platform, Scaffolding, Handling Gadgets Such As Jib Crane, Chain Pulley Bock, Arrangement Of Working Tools And Tackels, Personal Protective Equipment & Safety Gear/Garments Such As Gloves, Safety Glasses And Shoes, Earplugs Or Muffs, Hard Hats, Respirators, Or Coveralls, Vests And Full Body Suits Etc. Shall Be In The Scope Of The Supplier. The Work Shall Be Carried Out In Radioactive Area. , Segregation, Handling, Shifting, Transportation To Designated Place/Location Of All Process Equipments, Plates, Angle, Channels, Valves, Fittings, Pipes And Other Assemblies Such As Off Gas Heaters, Tanks, Columns, Furnace Assemblies, Glove Boxes, Different Pots And Other Remote Handling Equipments Etc. Inside The Cell.

BOQ

Sl. No. Item TitleItem Description
1Platform fabrication for maintenance of piping gadgets, pipe line protection structures with walkway using SS 304/Mild Steel material & insulation protection structure SS304 channels, SS304 angles, SS304 plates for piping and equipment installation worksPlatform fabrication for maintenance of piping gadgets, pipe line protection structures with walkway using SS 304/Mild Steel material & insulation protection structure SS304 channels, SS304 angles, SS304 plates for piping and equipment installation works
2Procurement, testing (from NABL approved lab) and inspection of MS raw materials and further preparation & approval of drawing, fabrication, DP testing, inspection, descaling, shot blasting, painting and installation of 25mm thick portable shielding walls for piping gadgets and associated system.Procurement, testing (from NABL approved lab) and inspection of MS raw materials and further preparation & approval of drawing, fabrication, DP testing, inspection, descaling, shot blasting, painting and installation of 25mm thick portable shielding walls for piping gadgets and associated system.
3Hook-ups with existing potentially active pipelines in the form of a Butt welding (GTAW) and in-cell but welding with radiography quality for SS304L pipes & pipe fittings of different size using high purity Argon gas (99.995% min) for shielding & back purging with good quality of water-soluble purge dam paper followed by Liquid Penetrant Examination for root & final weld, local passivation of the weld joints, permanent marking of the joint number, line testing, air flushing & line tracing as per approved procedure and technical specifications.Hook-ups with existing potentially active pipelines in the form of a Butt welding (GTAW) and in-cell but welding with radiography quality for SS304L pipes & pipe fittings of different size using high purity Argon gas (99.995% min) for shielding & back purging with good quality of water-soluble purge dam paper followed by Liquid Penetrant Examination for root & final weld, local passivation of the weld joints, permanent marking of the joint number, line testing, air flushing & line tracing as per approved procedure and technical specifications.
4Fillet welding (GTAW) in radioactive area for all stainless steel pipelines using high purity Argon gas (99.995% min) for shielding & back purging followed by Liquid Penetrant Examination for root & final weld and final approval of these welds after pressure testing shall be carried out as per tender technical specification.Fillet welding (GTAW) in radioactive area for all stainless steel pipelines using high purity Argon gas (99.995% min) for shielding & back purging followed by Liquid Penetrant Examination for root & final weld and final approval of these welds after pressure testing shall be carried out as per tender technical specification.
5Radiography of butt welding joints in radioactive area on the basis of relevant standards and approved procedure as per attached tender technical specifications.Radiography of butt welding joints in radioactive area on the basis of relevant standards and approved procedure as per attached tender technical specifications.
6Erection, installation, supporting ( utilizing SS/ MS structural members such as angles, channels, beam etc.), testing and commissioning of SS304L Piping in sizes from 8 mm NB to 200 mm NB [This work involves identification of existing pipelines, piping spool/ nozzles of equipment inside the cell, taking site measurements inside and outside the cell, incorporating the required changes in GA drawings, preparation & approval of pipe spool drawings prior to any fabrication activity, identification of all materials, taking delivery of the same from departmental stores, complete handling, transportation, cleaning, detergent washing, pickling & passivation, iron and chloride contamination checks, rinsing, marking, cutting of pipes and edge preparation, fabrication of SS pipe bends with 5D and more radius with LPE, fit-up, tack welding, full welding with LPE, alignment, maintaining slope, line tagging, weld joint tagging, supporting, local passivation of weld joint, pneumatic testing of lines, complete erection, preparation of as built drawings etc. and readying the same for GTAW welding as per approved spool drawings]. Pressure testing of all pipe lines & Embedded plugs/pipe EP's during commissioning shall also be in the scope of the supplier. Additionally, the work shall also involve erection of EIC approved safe working platform, scaffolding, handling gadgets such as jib crane, chain pulley bock, arrangement of working tools and tackels, personal protective equipment & safety gear/garments such as gloves, safety glasses and shoes, earplugs or muffs, hard hats, respirators, or coveralls, vests and full body suits etc. shall be in the scope of the supplier. The work shall be carried out in radioactive area.Erection, installation, supporting ( utilizing SS/ MS structural members such as angles, channels, beam etc.), testing and commissioning of SS304L Piping in sizes from 8 mm NB to 200 mm NB [This work involves identification of existing pipelines, piping spool/ nozzles of equipment inside the cell, taking site measurements inside and outside the cell, incorporating the required changes in GA drawings, preparation & approval of pipe spool drawings prior to any fabrication activity, identification of all materials, taking delivery of the same from departmental stores, complete handling, transportation, cleaning, detergent washing, pickling & passivation, iron and chloride contamination checks, rinsing, marking, cutting of pipes and edge preparation, fabrication of SS pipe bends with 5D and more radius with LPE, fit-up, tack welding, full welding with LPE, alignment, maintaining slope, line tagging, weld joint tagging, supporting, local passivation of weld joint, pneumatic testing of lines, complete erection, preparation of as built drawings etc. and readying the same for GTAW welding as per approved spool drawings]. Pressure testing of all pipe lines & Embedded plugs/pipe EP's during commissioning shall also be in the scope of the supplier. Additionally, the work shall also involve erection of EIC approved safe working platform, scaffolding, handling gadgets such as jib crane, chain pulley bock, arrangement of working tools and tackels, personal protective equipment & safety gear/garments such as gloves, safety glasses and shoes, earplugs or muffs, hard hats, respirators, or coveralls, vests and full body suits etc. shall be in the scope of the supplier. The work shall be carried out in radioactive area.
7Segregation, handling, shifting, transportation to designated place/location of all process equipments, plates, angle, channels, valves, fittings, pipes and other assemblies such as off gas heaters, tanks, columns, furnace assemblies, glove boxes, different pots and other remote handling equipments etc. inside the cell.Segregation, handling, shifting, transportation to designated place/location of all process equipments, plates, angle, channels, valves, fittings, pipes and other assemblies such as off gas heaters, tanks, columns, furnace assemblies, glove boxes, different pots and other remote handling equipments etc. inside the cell.

AI Tender Summary

OUR REF NO 58534520
AUTHORITY Boards / Undertakings / PSU
TENDER VALUE 80.10 Lakhs
LAST DATE 07-12-2026
Authority
Authority Name Bhabha Atomic Research Centre
Work Description Bids Are invited for Custom Bid For Services - Installation Of Structural Supports And Shielding Walls Erection Of Embedded Pipelines And Hook Up Of Existing Potentially Active Process Pipelines Inspection And Testing Works In The Radioactive Area At Wip Trombay - Platform Fabrication For Maintenance Of Piping Gadgets, Pipe Line Protection Structures With Walkway Using Ss 304/Mild Steel Material & Insulation Protection Structure Ss304 Channels, Ss304 Angles, Ss304 Plates For Piping And Equipment Installation Works , Procurement, Testing (From Nabl Approved Lab) And Inspection Of Ms Raw Materials And Further Preparation & Approval Of Drawing, Fabrication, Dp Testing, Inspection, Descaling, Shot Blasting, Painting And Installation Of 25Mm Thick Portable Shielding Walls For Piping Gadgets And Associated System. , Hook-Ups With Existing Potentially Active Pipelines In The Form Of A Butt Welding (Gtaw) And In-Cell But Welding With Radiography Quality For Ss304l Pipes & Pipe Fittings Of Different Size Using High Purity Argon Gas (99.995% Min) For Shielding & Back Purging With Good Quality Of Water-Soluble Purge Dam Paper Followed By Liquid Penetrant Examination For Root & Final Weld, Local Passivation Of The Weld Joints, Permanent Marking Of The Joint Number, Line Testing, Air Flushing & Line Tracing As Per Approved Procedure And Technical Specifications. , Fillet Welding (Gtaw) In Radioactive Area For All Stainless Steel Pipelines Using High Purity Argon Gas (99.995% Min) For Shielding & Back Purging Followed By Liquid Penetrant Examination For Root & Final Weld And Final Approval Of These Welds After Pressure Testing Shall Be Carried Out As Per Tender Technical Specification. , Radiography Of Butt Welding Joints In Radioactive Area On The Basis Of Relevant Standards And Approved Procedure As Per Attached Tender Technical Specifications. , Erection, Installation, Supporting ( Utilizing Ss/ Ms Structural Members Such As Angles, Channels, Beam Etc.), Testing And Commissioning Of Ss304l Piping In Sizes From 8 Mm Nb To 200 Mm Nb [This Work Involves Identification Of Existing Pipelines, Piping Spool/ Nozzles Of Equipment Inside The Cell, Taking Site Measurements Inside And Outside The Cell, Incorporating The Required Changes In Ga Drawings, Preparation & Approval Of Pipe Spool Drawings Prior To Any Fabrication Activity, Identification Of All Materials, Taking Delivery Of The Same From Departmental Stores, Complete Handling, Transportation, Cleaning, Detergent Washing, Pickling & Passivation, Iron And Chloride Contamination Checks, Rinsing, Marking, Cutting Of Pipes And Edge Preparation, Fabrication Of Ss Pipe Bends With 5D And More Radius With Lpe, Fit-Up, Tack Welding, Full Welding With Lpe, Alignment, Maintaining Slope, Line Tagging, Weld Joint Tagging, Supporting, Local Passivation Of Weld Joint, Pneumatic Testing Of Lines, Complete Erection, Preparation Of As Built Drawings Etc. And Readying The Same For Gtaw Welding As Per Approved Spool Drawings]. Pressure Testing Of All Pipe Lines & Embedded Plugs/Pipe Eps During Commissioning Shall Also Be In The Scope Of The Supplier. Additionally, The Work Shall Also Involve Erection Of Eic Approved Safe Working Platform, Scaffolding, Handling Gadgets Such As Jib Crane, Chain Pulley Bock, Arrangement Of Working Tools And Tackels, Personal Protective Equipment & Safety Gear/Garments Such As Gloves, Safety Glasses And Shoes, Earplugs Or Muffs, Hard Hats, Respirators, Or Coveralls, Vests And Full Body Suits Etc. Shall Be In The Scope Of The Supplier. The Work Shall Be Carried Out In Radioactive Area. , Segregation, Handling, Shifting, Transportation To Designated Place/Location Of All Process Equipments, Plates, Angle, Channels, Valves, Fittings, Pipes And Other Assemblies Such As Off Gas Heaters, Tanks, Columns, Furnace Assemblies, Glove Boxes, Different Pots And Other Remote Handling Equipments Etc. Inside The Cell.
Basic Detail
Tender No GEM/2026/B/8275462
Bidding Type Tender
Location
City Mumbai Suburban
State Maharashtra
Key Dates
Publish Date 14 Nov 2026
Submission Date 07 Dec 2026
Open Date 08 Dec 2026
Finance
Tender Value 80.10 Lakhs
Tender Fee Ref. Documents
EMD 1.60 Lakhs
Exemption Available
Document List
22bdb713-0354-4503-a4a0-4a3f316a8a4b.pdf
1794640000.xlsx
1794640250.pdf
1794646125.pdf
1794646154.pdf
1794646174.pdf
1794646195.pdf
1794646200.pdf
1794646216.pdf
1794646252.pdf
1794646280.pdf
1794646303.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 14, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Dec 07, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 17 days
Dec 08, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 18 days

Tender Documents

Download All (ZIP) ↓
pdf

22bdb713-0354-4503-a4a0-4a3f316a8a4b.pdf

xlsx

1794640000.xlsx

pdf

1794640250.pdf

pdf

1794646125.pdf

pdf

1794646154.pdf

pdf

1794646174.pdf

pdf

1794646195.pdf

pdf

1794646200.pdf

pdf

1794646216.pdf

pdf

1794646252.pdf

pdf

1794646280.pdf

pdf

1794646303.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender