New and Renewable Energy Government Departments Closing in 15 days TDR #58534352

Bids Are invited for Supply Of Hdpe Pipes And Fittings

Issued by Government Departments · Ganjam, Odisha
Tender Value
6.49 Lakhs
Estimated cost
Bid Submission
05 Dec 2026
15 days left
EMD
20000
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Gem

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Ganjam → Odisha
EMD Exemption
Available
Quantity
1887

Project Description

Bids Are invited for Hdpe Pipes With Is Stamping On The Pipe With Neck And Slip On Flange As Per Standard Is 4984-1995,Pn 10,Pe 80.The Length Of The Pipes Should Be Appx.6 Mtr Only. The Sizes Of The Pipes Are - 90 Mm Od , The Length Of The Pipes Should Be Appx.6 Mtr Only. The Sizes Of The Pipes Are - 75 Mm Od , Hdpe Pipes Rolls With Is Stamping On The Pipe As Per Standard Is 4984-1995,Pn 10,Pe 80. One Roll Length Should Be Min 50 Mtrs- 63 Mm Od , Hdpe Pipes Rolls With Is Stamping On The Pipe As Per Standard Is 4984-1995,Pn 10,Pe 80. One Roll Length Should Be Min 50 Mtrs- 32 Mm Od , Hdpe Moulded Equal Tee As Per Standard Is 8008,Pn 10,Pe 80, Of Following Sizes Without Flanges And Pipe Ends 90 Mm Od , Hdpe Moulded Equal Tee As Per Standard Is 8008,Pn 10,Pe 80, Of Following Sizes Without Flanges And Pipe Ends 75 Mm Od , Hdpe Moulded Equal Tee As Per Standard Is 8008,Pn 10,Pe 80, Of Following Sizes Without Flanges And Pipe Ends 63 Mm Od , Hdpe Moulded Equal Tee As Per Standard Is 8008,Pn 10,Pe 80, Of Following Sizes Without Flanges And Pipe Ends 32 Mm Od , Hdpe Moulded 90 Degree Bend As Per Standard Is 8008,Pn 10,Pe 80, Of Following Sizes Without Flanges And Pipe Ends 90 Mm Od , Hdpe Moulded 90 Degree Bend As Per Standard Is 8008,Pn 10,Pe 80, Of Following Sizes Without Flanges And Pipe Ends 75 Mm Od , Hdpe Moulded 90 Degree Bend As Per Standard Is 8008,Pn 10,Pe 80, Of Following Sizes Without Flanges And Pipe Ends 63 Mm Od , Hdpe Moulded 90 Degree Bend As Per Standard Is 8008,Pn 10,Pe 80, Of Following Sizes Without Flanges And Pipe Ends 32 Mm Od , Hdpe Neck End Pipe End As Per Standard Is 8008,Pn 10,Pe 80, Of Following Sizes 90 Mm Od , Hdpe Neck End Pipe End As Per Standard Is 8008,Pn 10,Pe 80, Of Following Sizes 75 Mm Od , Hdpe Neck End Pipe End As Per Standard Is 8008,Pn 10,Pe 80, Of Following Sizes 63 Mm Od , Hdpe Neck End Pipe End As Per Standard Is 8008,Pn 10,Pe 80, Of Following Sizes 32 Mm Od , Hdpe Reducer As Per Standard Is 8008,Pn 10,Pe 80, Of Following Sizes 90 X 75 Mm , Hdpe Reducer As Per Standard Is 8008,Pn 10,Pe 80, Of Following Sizes 90 X 63 Mm , Hdpe Reducer As Per Standard Is 8008,Pn 10,Pe 80, Of Following Sizes 63 X 32 Mm , Galvanizing Process As Per Is 2629-1985 Size- Od X Id X Thickness All Dimensions Are In Mm- 1 Inch Suitable For 32 Mm Od Hdpe Pipe Size In Mm - 117 X 42 X10, Pcd 89Mm 4 Holes Dia.14Mm , Galvanizing Process As Per Is 2629-1985 Size- Od X Id X Thickness All Dimensions Are In Mm- 2 Inch Suitable For 63 Mm Od Hdpe Pipe Size In Mm- 178 X 73 X12, Pcd-140Mm 4 Holes Dia.14Mm , Galvanizing Process As Per Is 2629-1985 Size- Od X Id X Thickness All Dimensions Are In Mm- 2 And Half Inch Suitable For 75 Mm Od Hdpe Pipe Size In Mm- 191 X 85 X12, Pcd-152Mm 4 Holes Dia.18Mm , Galvanizing Process As Per Is 2629-1985 Size- Od X Id X Thickness All Dimensions Are In Mm- 3Inch Suitable For 90 Mm Od Hdpe Pipe Size In Mm- 216 X 100 X16, Pcd-178Mm 8 Holes Dia.18Mm , Ball Valve Pp Size Of The Valve As Below 25 Mm , Ball Valve Pp Size Of The Valve As Below 50 Mm , Ball Valve Pp Size Of The Valve As Below 80 Mm , Mechanical Coupling For 63Mm Od Plain End Hdpe Pipe , Mechanical Coupling For 75 Mm Od Plain End Hdpe Pipe , Mechanical Coupling For 90Mm Od Plain End Hdpe Pipe , Mechanical Coupling For 200Mm Od Plain End Hdpe Pipe

BOQ

Sl. No. Item TitleItem Description
1HDPE pipes with IS stamping on the pipe with neck and slip on flange as per standard IS 4984-1995,PN 10,PE 80.The length of the pipes should be appx.6 mtr only. The sizes of the pipes are - 90 mm ODHDPE pipes with IS stamping on the pipe with neck and slip on flange as per standard IS 4984-1995,PN 10,PE 80.The length of the pipes should be appx.6 mtr only. The sizes of the pipes are - 90 mm OD
2The length of the pipes should be appx.6 mtr only. The sizes of the pipes are - 75 mm ODThe length of the pipes should be appx.6 mtr only. The sizes of the pipes are - 75 mm OD
3HDPE pipes rolls with IS stamping on the pipe as per standard IS 4984-1995,PN 10,PE 80. One roll length should be min 50 Mtrs- 63 mm ODHDPE pipes rolls with IS stamping on the pipe as per standard IS 4984-1995,PN 10,PE 80. One roll length should be min 50 Mtrs- 63 mm OD
4HDPE pipes rolls with IS stamping on the pipe as per standard IS 4984-1995,PN 10,PE 80. One roll length should be min 50 Mtrs- 32 mm ODHDPE pipes rolls with IS stamping on the pipe as per standard IS 4984-1995,PN 10,PE 80. One roll length should be min 50 Mtrs- 32 mm OD
5HDPE moulded equal Tee as per standard IS 8008,PN 10,PE 80, of following sizes without flanges and pipe ends 90 mm ODHDPE moulded equal Tee as per standard IS 8008,PN 10,PE 80, of following sizes without flanges and pipe ends 90 mm OD
6HDPE moulded equal Tee as per standard IS 8008,PN 10,PE 80, of following sizes without flanges and pipe ends 75 mm ODHDPE moulded equal Tee as per standard IS 8008,PN 10,PE 80, of following sizes without flanges and pipe ends 75 mm OD
7HDPE moulded equal Tee as per standard IS 8008,PN 10,PE 80, of following sizes without flanges and pipe ends 63 mm ODHDPE moulded equal Tee as per standard IS 8008,PN 10,PE 80, of following sizes without flanges and pipe ends 63 mm OD
8HDPE moulded equal Tee as per standard IS 8008,PN 10,PE 80, of following sizes without flanges and pipe ends 32 mm ODHDPE moulded equal Tee as per standard IS 8008,PN 10,PE 80, of following sizes without flanges and pipe ends 32 mm OD
9HDPE moulded 90 degree Bend as per standard IS 8008,PN 10,PE 80, of following sizes without flanges and pipe ends 90 mm ODHDPE moulded 90 degree Bend as per standard IS 8008,PN 10,PE 80, of following sizes without flanges and pipe ends 90 mm OD
10HDPE moulded 90 degree Bend as per standard IS 8008,PN 10,PE 80, of following sizes without flanges and pipe ends 75 mm ODHDPE moulded 90 degree Bend as per standard IS 8008,PN 10,PE 80, of following sizes without flanges and pipe ends 75 mm OD
11HDPE moulded 90 degree Bend as per standard IS 8008,PN 10,PE 80, of following sizes without flanges and pipe ends 63 mm ODHDPE moulded 90 degree Bend as per standard IS 8008,PN 10,PE 80, of following sizes without flanges and pipe ends 63 mm OD
12HDPE moulded 90 degree Bend as per standard IS 8008,PN 10,PE 80, of following sizes without flanges and pipe ends 32 mm ODHDPE moulded 90 degree Bend as per standard IS 8008,PN 10,PE 80, of following sizes without flanges and pipe ends 32 mm OD
13HDPE Neck End Pipe End as per standard IS 8008,PN 10,PE 80, of following sizes 90 mm ODHDPE Neck End Pipe End as per standard IS 8008,PN 10,PE 80, of following sizes 90 mm OD
14HDPE Neck End Pipe End as per standard IS 8008,PN 10,PE 80, of following sizes 75 mm ODHDPE Neck End Pipe End as per standard IS 8008,PN 10,PE 80, of following sizes 75 mm OD
15HDPE Neck End Pipe End as per standard IS 8008,PN 10,PE 80, of following sizes 63 mm ODHDPE Neck End Pipe End as per standard IS 8008,PN 10,PE 80, of following sizes 63 mm OD
16HDPE Neck End Pipe End as per standard IS 8008,PN 10,PE 80, of following sizes 32 mm ODHDPE Neck End Pipe End as per standard IS 8008,PN 10,PE 80, of following sizes 32 mm OD
17HDPE Reducer as per standard IS 8008,PN 10,PE 80, of following sizes 90 X 75 mmHDPE Reducer as per standard IS 8008,PN 10,PE 80, of following sizes 90 X 75 mm
18HDPE Reducer as per standard IS 8008,PN 10,PE 80, of following sizes 90 X 63 mmHDPE Reducer as per standard IS 8008,PN 10,PE 80, of following sizes 90 X 63 mm
19HDPE Reducer as per standard IS 8008,PN 10,PE 80, of following sizes 63 X 32 mmHDPE Reducer as per standard IS 8008,PN 10,PE 80, of following sizes 63 X 32 mm
20Galvanizing Process as per IS 2629-1985 Size- OD x ID x Thickness All dimensions are in mm- 1 inch Suitable for 32 MM OD HDPE Pipe Size in mm - 117 x 42 x10, PCD 89mm 4 holes dia.14mmGalvanizing Process as per IS 2629-1985 Size- OD x ID x Thickness All dimensions are in mm- 1 inch Suitable for 32 MM OD HDPE Pipe Size in mm - 117 x 42 x10, PCD 89mm 4 holes dia.14mm
21Galvanizing Process as per IS 2629-1985 Size- OD x ID x Thickness All dimensions are in mm- 2 inch Suitable for 63 MM OD HDPE Pipe Size in mm- 178 x 73 x12, PCD-140mm 4 holes dia.14mmGalvanizing Process as per IS 2629-1985 Size- OD x ID x Thickness All dimensions are in mm- 2 inch Suitable for 63 MM OD HDPE Pipe Size in mm- 178 x 73 x12, PCD-140mm 4 holes dia.14mm
22Galvanizing Process as per IS 2629-1985 Size- OD x ID x Thickness All dimensions are in mm- 2 and half inch Suitable for 75 MM OD HDPE Pipe Size in mm- 191 x 85 x12, PCD-152mm 4 holes dia.18mmGalvanizing Process as per IS 2629-1985 Size- OD x ID x Thickness All dimensions are in mm- 2 and half inch Suitable for 75 MM OD HDPE Pipe Size in mm- 191 x 85 x12, PCD-152mm 4 holes dia.18mm
23Galvanizing Process as per IS 2629-1985 Size- OD x ID x Thickness All dimensions are in mm- 3inch Suitable for 90 MM OD HDPE Pipe Size in mm- 216 x 100 x16, PCD-178mm 8 holes dia.18mmGalvanizing Process as per IS 2629-1985 Size- OD x ID x Thickness All dimensions are in mm- 3inch Suitable for 90 MM OD HDPE Pipe Size in mm- 216 x 100 x16, PCD-178mm 8 holes dia.18mm
24Ball Valve PP Size of the valve as below 25 mmBall Valve PP Size of the valve as below 25 mm
25Ball Valve PP Size of the valve as below 50 mmBall Valve PP Size of the valve as below 50 mm
26Ball Valve PP Size of the valve as below 80 mmBall Valve PP Size of the valve as below 80 mm
27Mechanical coupling for 63mm OD Plain end HDPE PipeMechanical coupling for 63mm OD Plain end HDPE Pipe
28Mechanical coupling for 75 mm OD Plain end HDPE PipeMechanical coupling for 75 mm OD Plain end HDPE Pipe
29Mechanical coupling for 90mm OD Plain end HDPE PipeMechanical coupling for 90mm OD Plain end HDPE Pipe
30Mechanical coupling for 200mm OD Plain end HDPE PipeMechanical coupling for 200mm OD Plain end HDPE Pipe

AI Tender Summary

OUR REF NO 58534352
AUTHORITY Government Departments
TENDER VALUE 6.49 Lakhs
LAST DATE 05-12-2026
Authority
Authority Name Department Of Atomic Energy
Work Description Bids Are invited for Hdpe Pipes With Is Stamping On The Pipe With Neck And Slip On Flange As Per Standard Is 4984-1995,Pn 10,Pe 80.The Length Of The Pipes Should Be Appx.6 Mtr Only. The Sizes Of The Pipes Are - 90 Mm Od , The Length Of The Pipes Should Be Appx.6 Mtr Only. The Sizes Of The Pipes Are - 75 Mm Od , Hdpe Pipes Rolls With Is Stamping On The Pipe As Per Standard Is 4984-1995,Pn 10,Pe 80. One Roll Length Should Be Min 50 Mtrs- 63 Mm Od , Hdpe Pipes Rolls With Is Stamping On The Pipe As Per Standard Is 4984-1995,Pn 10,Pe 80. One Roll Length Should Be Min 50 Mtrs- 32 Mm Od , Hdpe Moulded Equal Tee As Per Standard Is 8008,Pn 10,Pe 80, Of Following Sizes Without Flanges And Pipe Ends 90 Mm Od , Hdpe Moulded Equal Tee As Per Standard Is 8008,Pn 10,Pe 80, Of Following Sizes Without Flanges And Pipe Ends 75 Mm Od , Hdpe Moulded Equal Tee As Per Standard Is 8008,Pn 10,Pe 80, Of Following Sizes Without Flanges And Pipe Ends 63 Mm Od , Hdpe Moulded Equal Tee As Per Standard Is 8008,Pn 10,Pe 80, Of Following Sizes Without Flanges And Pipe Ends 32 Mm Od , Hdpe Moulded 90 Degree Bend As Per Standard Is 8008,Pn 10,Pe 80, Of Following Sizes Without Flanges And Pipe Ends 90 Mm Od , Hdpe Moulded 90 Degree Bend As Per Standard Is 8008,Pn 10,Pe 80, Of Following Sizes Without Flanges And Pipe Ends 75 Mm Od , Hdpe Moulded 90 Degree Bend As Per Standard Is 8008,Pn 10,Pe 80, Of Following Sizes Without Flanges And Pipe Ends 63 Mm Od , Hdpe Moulded 90 Degree Bend As Per Standard Is 8008,Pn 10,Pe 80, Of Following Sizes Without Flanges And Pipe Ends 32 Mm Od , Hdpe Neck End Pipe End As Per Standard Is 8008,Pn 10,Pe 80, Of Following Sizes 90 Mm Od , Hdpe Neck End Pipe End As Per Standard Is 8008,Pn 10,Pe 80, Of Following Sizes 75 Mm Od , Hdpe Neck End Pipe End As Per Standard Is 8008,Pn 10,Pe 80, Of Following Sizes 63 Mm Od , Hdpe Neck End Pipe End As Per Standard Is 8008,Pn 10,Pe 80, Of Following Sizes 32 Mm Od , Hdpe Reducer As Per Standard Is 8008,Pn 10,Pe 80, Of Following Sizes 90 X 75 Mm , Hdpe Reducer As Per Standard Is 8008,Pn 10,Pe 80, Of Following Sizes 90 X 63 Mm , Hdpe Reducer As Per Standard Is 8008,Pn 10,Pe 80, Of Following Sizes 63 X 32 Mm , Galvanizing Process As Per Is 2629-1985 Size- Od X Id X Thickness All Dimensions Are In Mm- 1 Inch Suitable For 32 Mm Od Hdpe Pipe Size In Mm - 117 X 42 X10, Pcd 89Mm 4 Holes Dia.14Mm , Galvanizing Process As Per Is 2629-1985 Size- Od X Id X Thickness All Dimensions Are In Mm- 2 Inch Suitable For 63 Mm Od Hdpe Pipe Size In Mm- 178 X 73 X12, Pcd-140Mm 4 Holes Dia.14Mm , Galvanizing Process As Per Is 2629-1985 Size- Od X Id X Thickness All Dimensions Are In Mm- 2 And Half Inch Suitable For 75 Mm Od Hdpe Pipe Size In Mm- 191 X 85 X12, Pcd-152Mm 4 Holes Dia.18Mm , Galvanizing Process As Per Is 2629-1985 Size- Od X Id X Thickness All Dimensions Are In Mm- 3Inch Suitable For 90 Mm Od Hdpe Pipe Size In Mm- 216 X 100 X16, Pcd-178Mm 8 Holes Dia.18Mm , Ball Valve Pp Size Of The Valve As Below 25 Mm , Ball Valve Pp Size Of The Valve As Below 50 Mm , Ball Valve Pp Size Of The Valve As Below 80 Mm , Mechanical Coupling For 63Mm Od Plain End Hdpe Pipe , Mechanical Coupling For 75 Mm Od Plain End Hdpe Pipe , Mechanical Coupling For 90Mm Od Plain End Hdpe Pipe , Mechanical Coupling For 200Mm Od Plain End Hdpe Pipe
Basic Detail
Tender No GEM/2026/B/8249329
Bidding Type Tender
Location
City Ganjam
State Odisha
Key Dates
Publish Date 14 Nov 2026
Submission Date 05 Dec 2026
Open Date 06 Dec 2026
Finance
Tender Value 6.49 Lakhs
Tender Fee Ref. Documents
EMD 20000
Exemption Available
Document List
a030e407-6f26-42a0-b2f5-14d1eeeb5aad.pdf
ts-8164_2026-11-06-12-33-22_9c5ecb70ffadbc80bd9605991ee50f44.pdf
10137167_Boq_1.xlsx
GCOCSUPPLY_7bb74a00-f3f7-43ed-b16f1793949650394_buycon2.irel.odisha.docx

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 14, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Dec 05, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 15 days
Dec 06, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 16 days

Tender Documents

Download All (ZIP) ↓
pdf

a030e407-6f26-42a0-b2f5-14d1eeeb5aad.pdf

pdf

ts-8164_2026-11-06-12-33-22_9c5ecb70ffadbc80bd9605991ee50f44.pdf

xlsx

10137167_Boq_1.xlsx

irel

GCOCSUPPLY_7bb74a00-f3f7-43ed-b16f1793949650394_buycon2.irel.odisha.docx

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender