Tender For Repair/Maint To Flooring Plinth Protection Plastering And Other Connected B/R Work In Md Accn Of Jcos/Ors (Zone Ii) At Lansdowne
Tender Value
25 Lakhs
Estimated cost
Bid Submission
07 Dec 2026
22 days left
EMD
50000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Pauri Garhwal → Uttarakhand
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair/Maint To Flooring Plinth Protection Plastering And Other Connected B/R Work In Md Accn Of Jcos/Ors (Zone Ii) At Lansdowne
BOQ
| Sl. No. | Item Description |
| 1 | M&L for burnt clay, brick work with sub class 'B' bricks , using old size bricks, straight or curved on plan exc 6 m mean radius built in cement mortar 1:6 including demolition of brick work built in mud mortar complete all as specified and directed. |
| 2 | M & L for walling of random rubble stone masonry, un-coursed, well bonded, bedded, solidly hearted and built in cement mortar 1:6 including demolition of stone boulder masonry built in mud mortar complete all as specified and directed. |
| 3 | Extra over stone walling for hammer dressing to faces of stone and dressing of faced beds and joints as specified for RR walling uncoursed or brought upto courses hammer dressing with maximum depression on face from straight edge held against the dressed surface n exc. 40mm for lime or sand stone complete all as specified and directed. |
| 4 | M&L for raised pointing to RR or Polygon rubble uncoursed or brought upto course in cement mortar 1:4 complete all as specified and directed. |
| 5 | M&L for glazed ceramic white tiles (Matte/Gloss Finish) of size not less than 450x300x7/600x300x7 mm thick as on vertical surfaces of wall set and jointed in neat cement slurry and pointed with coloured cement to match over and including 10 mm thick backing coat on fair faces of brick work in CM 1:4 including dismantling wall tiling including cement mortar bedding (but not backing) and removing rubbish off premisescomplete all as specified and as directed. |
| 6 | M&L for Non- skid white ceramic tiles 7 to 8mm thick, (square/rectangular) area of each tile exceeding 0.11 sq.m but not exceeding 0.18 sq. m in floos etc set and jointed in neat cement slurry and pointed in white or coloured cement to match , over and including 15 mm thick screed bed in cement and sand mortar 1:6 including dismantling floor tiling including cement mortar bedding (but not backing) and removing rubbish off premisescomplete all as specified and as directed. |
| 7 | M&L for Light Shade Virified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match as in floor etc over and including 15 mm thick screed bed in CM 1:6 Set and jointed in neat cement slurry including dismantling floor tiling including cement mortar bedding (but not backing) and removing rubbish off premisescomplete all as specified and as directed. |
| 8 | All as per item 7 above but as in skirting/vertical surface including 10 mm thick backing coat on fair faces of brick work in CM 1:4 etc complete all as specified and as directed. |
| 9 | M&L Light Shade Virified Ceramic tiles light shade 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match incl 15 mm thick screed bed in CM 1:6 Set and jointed in neat cement slurry including dismantling floor tiling including cement mortar bedding (but not backing) and removing rubbish off premisescomplete all as specified and as directed. |
| 10 | All as per Item No. 9 but 10 mm thick backing coat on fair faces of brick work in CM 1:4 in skirting complete all as specified and as directed. |
| 11 | M&L for 60 mm thick machine pressed precast concrete interlocking paver block (glossy finish) of M-35 Gde of approved shape, size and colour confirming to IS 15658-2006 and including joints filled with sand and stone dust as in levelling course of interlocking complete including 50mm thick sand cushioning including demolition of Stone slabs and tiles of any description or thickness in floors complete all as specified and as directed. Note: Shape, size and colour of interlocking paver block as approved by AGE(I) |
| 12 | M&L for chequered cement concrete tiles with grey cement and pigment of size 30cmX30cmX25mm thick ,set and jointed and pointed in neat cement slurry in floor etc over and including 15mm thick screed bed in CM 1:6 including demolition of Stone slabs and tiles of any description or thickness in floors complete all as specified and as directed. |
| 13 | M & L for machine cut kota stone slab in flooring of floor/steps 20-25 mm thick laid over and including 15mm thick screed bed in CM 1:6 & cement mixed with pigment to match the shade of slab including rubbing & and polishing incl demolition of Stone slabs and tiles of any description or thickness in floors complete all as specified and as directed. |
| 14 | M&L for 20 mm thick Granite slab work(table rubbed and polish) of approved quality of required size in Floor,Wall, Platform ,steps/riser and like bedded and jointed in grey cement slurry and pointed with coloured cement(1:2) usig marble dust with admixture of pigment to match the shade of granite stone laid over and including 20 mm thick screed bed in CM (1:6) including demolition of Stone slabs and tiles of any description or thickness in floors complete all as specified and as directed. |
| 15 | Demolition of cement concrete in ground floor and paving not exceeding 15cm thick ( below or above ground level ) including removal of debries out side MD land complete all as specified and as directed. |
| 16 | M& L for 25 mm thick PCC 1:2:4 type B-0, using 12.5 mm graded stone aggregate, including finishing surface of concrete topping even and rough complete all as specified and directed. |
| 17 | M&L for 75 mm thick PCC PCC1:4:8 type D-2 using 40mm graded stone aggregate as in sub base of floor etc complete all as specified and directed |
| 18 | M & L for 75mm thick cement concrete 1:3:6 type C2, with using 40 mm graded stone aggregate as in floor/ plinth protection finish the surface even and smooth with using extra cement and necessary form work etc complete all as specified and as directed. |
| 19 | M&L for Rendering 10 mm thick CM 1:6 on brick or concrete surfaces finished even & smooth without using extra cement including taking down cement plaster of any description including raking out joints, hacking for key, scrubbing down with water etc and removing unserviceable material,outside cantt area distance not exceeding 1.5 KM complete all as specified and as directed. |
| 20 | M & L for Rendering 15 mm thick in two coats i.e. 10mm thick in CM 1:6 and 5mm thick in CM 1:4 using water proofing liquid compound as per manufacturer's instructions on other than fair faces of brick or concrete surfaces and finishing surfaces even & smooth without using extra cement including taking down cement plaster of any description including raking out joints, hacking for key, scrubbing down with water etc and removing unserviceable material,outside cantt area distance not exceeding 1.5 KM complete all as specified and as directed.Note :- Water proofing liquid compound shall be measured and paid separately. |
| 21 | Supply only liquid water proofing compound.ISI marked complete all as specified and directed. |
| 22 | M&L preparation of newly plastered surface of external wall by application of 1mm thick wall care putty to remove the dent and to make the surface even and smooth by grinding or rubbing with sand paper and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm complete all as specified and directed. |
| 23 | M&L for preparation of newly plastered surface of internal wall by application of 1mm thick wall care putty to remove the dent and to make the surface even and smooth by grinding or rubbing with sand paper and applying two coats of acrylic distemper over a coat of primer using roller complete all as specified and directed. |
| 24 | S&F 18 mm thick with min density 600 Kg/cu.m LEAD FREE PVC Celuka ply of single side rigid laminate of approved colour and other side plain white colour fixed with ss screws and solvent cement/ adhesive to make kitchen cabinet shutters complete as per manufacturer’s instructions including taking down existing boarding complete all as specified and directed. |
| 25 | S&F Piano closing hinges openable at 110 degree for kitchen cabinet shutters complete in all respect and fixed in position acomplete all as specified and directed. |
| 26 | S&F D-type cabinet handles premium quality, stainless steel 304/gloss chrome/SN finished 150mm long matt finished complete fixed in position all as specified. |
| 27 | S&F 1000 ltr capacity rotational moulded polyethylene water storage tanks triple layered white in colour (cylindrical vertical with closed top) hoisted and fixed in position including 20 mm dia ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plasttic ball screwed for iron pipe and fixed (Minimum weight 20mm-455gms) including dismantling of water tanks complete all as specified and directed. |
| 28 | All as per item no 27 above but 500Ltr complete all as specified and directed. |
| 29 | S&F in repair vitreous china squatting pan 'orissa pattern 580 mm X 440 mm white with integral foot rests (excluding flushing cistern and flushing pipe but including fixing with 110 mm S trap complete all as specified and directed |
| 30 | S&F in repair vitreous china wash down water closet pedestal pattern white excluding flushing cistern and flush pipes but including fixing with 110mm trap & PVC Seat Covercomplete all as specified and directed |
| 31 | S&F in repair vitreous china wash hand basin white flat back, size 550x400 mm including bracket but excluding taps ,waste pipes , chain and plug etc complete all as specified and directed. |
| 32 | S&F in repair PVC valveless, syphonic action type flushing cistern (Dual action ISI Marked), low level , white, with inlet ball valve, float and handle including brackets and 32 mm flush pipe suitable for IWC/EWC of polyethylene of low or high density complete all as specified and directed. |
| 33 | S&F 15 mm Steel water tubing medium grade galvanised with all fittings including short lengths, fixed to walls, concealed in wall and ceiling or laid in floor complete with all fittings(such as bends, elbows, Tee short pieces, connectors, back nuts, diminishing pieces, caps and plugs, unions etc.) of nominal bore 15mm including taking down steel tubing complete all as specified and directed. |
| 34 | S&F in repair Pillar tap 15 mm dia fancy type, cast copper alloy, with capstan heads, chromium plated screwed down high pressure with or without lettered Hot or Cold with scrwed shanks and fly nuts, screwed for iron pipe and fixed complete all as specified and directed. |
| 35 | S&F in repair 15mm Bib tap fancy type cast copper chromium plated alloy with capstan handle screwed down screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed. |
| 36 | S&F in repair fancy type chromium plated 15mm bore two way Bib cock cast copper alloy with crutch or butterfly handle, screwed for iron pipe or brass ferrule etc complete all as specified and as directed. |
| 37 | S&F in repair Stop Angle valve cast copper alloy chromium plated 15mm dia, screwed down, high pressure with capstan handle, screwed both ends for iron pipes or for unions and fixed ,complete all as specified. |
| 38 | S&F in repair CP health faucet with 1m flexible tube and wall hook complete all as specified and directed. |
| 39 | S&F in repair 15mm dia brass CP wall mixer with provision for over head shower for mixing hot and cold water screwed down for iron pipe and fixed including taking down existing bib tap complete all as specified and directed. |
| 40 | S&F in repair CP 15 mm Kitchen Sink mixutre(Swan Neck)mixing hot & cold water, fancy type, cast copper alloy, chromimum plated with capstan head, chromium plated, screwed down high pressure, screwed for iron pipe etc complete all as specfied and directed. |
| 41 | S&F in repair kitchen sink with drainage board made of stainless steel 1.0 mm thick in kitchen with plug , washer and waste including bedding layer in CM (1:6) in wall or including fixing cantilever bracket and connecting union to pipes over all size 915x460 mm bowl size 410x330x160 mm including taking out unserviceable kitchen sink complete all as specified and as directed. |
| 42 | S&F in repair stain less steel plate rack for kitchen 1 mm thick over all size 24\\" x 36\\" x 10\\" of best quality with suitable hanging arrangement and fixed to wall complete all as specified and as directed. |
| 43 | S&F in repair corner glass shelf 300 mm x 7 mm thick (with bracket) all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 14, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedDec 07, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 22 daysDec 15, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 30 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender