Tender For Repair/Maint To Windows, Glass Panes, Wire Mesh And Other Misc Joinery Work At Jcos Accomodation At Lansdowne Under Age(I) Lansdowne
Tender Value
25 Lakhs
Estimated cost
Bid Submission
07 Dec 2026
22 days left
EMD
50000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Pauri Garhwal → Uttarakhand
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair/Maint To Windows, Glass Panes, Wire Mesh And Other Misc Joinery Work At Jcos Accomodation At Lansdowne Under Age(I) Lansdowne
BOQ
| Sl. No. | Item Description |
| 1 | Taking down chowkhats or frames of any description with shutters (without taking off shutter from the frames) not exceeding 1.5 Sqm each complete all as specified and directed. |
| 2 | Taking down chowkhats or frames of any description with shutters (without taking off shutter from the frames) exe 1.5 Sqm but not exceeding 4.0 Sqm each complete all as specified and directed. |
| 3 | Taking down wooden shutters of any description exc 1 Sqm but n. exc 2 sqm each and removing to store complete all as specified and directed. |
| 4 | S&F Factory made double riveted WPC (wood polymer composite) solid door frames/chowkat of size 65x125 mm of virgin PVC Polymer of K value 58-60(Suspension Grade) calcium carbonate and natural fibres (wood/powder/rice husk/wheat husk ) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threated star heads SS screw having minimum frame density of 750 kg/cum screw withdrawal strenght of 2200 N (face) and 1100 N (Edge)proof, water/moisture proo, minimum compressive strenght of 58 N/mm2, modules of elasticity 900 N/mm2 and serestance to spread of flame of Class A category with property of being termite/borer proof, water / moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete all as specified and directed. |
| 5 | S&F Factory made single riveted WPC (wood polymer composite) solid door frames/chowkat of size 65x100mm of virgin PVC Polymer of K value 58-60(Suspension Grade) calcium carbonate and natural fibres (wood/powder/rice husk/wheat husk ) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threated star heads SS screw having minimum frame density of 750 kg/cum screw withdrawal strenght of 2200 N (face) and 1100 N (Edge)proof, water/moisture proo, minimum compressive strenght of 58 N/mm2, modules of elasticity 900 N/mm2 and serestance to spread of flame of Class A category with property of being termite/borer proof, water / moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. |
| 6 | S & F 30 mm thick factory made single extruded WPC (Wood Polymer Composite) solid flush SKELTON door shutter comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moistur proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, complete all as specified and directed. |
| 7 | S&F 30mm thick moulded WPC wire mesh factory made 1005 decorative type, moulded, panel door shutter prepare to receive Mesh, gauze etc (single or two panel Including wire mesh (confirming as per IS: 4020) made from 100% lead free single extruded with 2, 4 or 6 raised panel design on the front side with 10mm deep mould on single side with wood grain texture and back side plain with density not less than 600kg/cum manufactured by an ISO : 9001-2015 certified company. The door should be water proof, termite proof, fire retardent and having screw holding capacity complete all as specified and directed. |
| 8 | S & F 250 mm long aluminium alloy anodised sliding door bolt with hasp staple, bolt type, and fixing clips of sheet, cast or extruded sections & fixing bolts and sliding bolts of extruded section or cast aluminium alloy, ISI marked complete all as specified and directed. |
| 9 | S & F 150 mm long, aluminium anodised, barrel tower bolts, of extruded section ISI marked complete all as specified and directed. |
| 10 | S & F aluminium handles cast type anodised of size 150 mm long ISI marked complete all as specified and directed. |
| 11 | S&F 5mm thick Prelam PVC sheet in strips & channel feathered at the edges for fixing on Solid PVC Wall Lining, Insulated PVC Wall Lining, and Solid PVC Partitions inclusive of Solvent Cement and fixing at site including dismantling Wall boards complete all as specified and as directed |
| 12 | S& F 5mm thick PVC sheet fillet of width 35 mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing complete all as specified and directed. |
| 13 | S&F fabricating coloured powder coated aluminium frame work door,windows , ventilators, with one or more rebates sections of approved tint as required including beading,cleat,screws, fasteners , plugs, for fixing with wall/ceiling columns/beams etc complete all as specified and directed. |
| 14 | S&F aluminium coloured powder coated door/ window (sliding type)/ventilator shutters without sash bar aluminium section weighing 0.55 kg/m including necessary locking arrangement, guide wheels, jointing cleats, glazing clips rubber packing anodised aluminium snap beading screws etc complete all as specified and directed. |
| 15 | S&F 4.8 mm thick plain or tinted glass, ordinary quality including rubber gasket for packing and fixed to aluminium Ventilator /window / including necessary cutting / moulding and chamferrring of edges for service window/counters complete all as specified and directed. |
| 16 | S & F for Stainless steel wire cloth of 0.36 mm dia wire and average width of aperture 1.40 mm & fixed with tacks of stainless steel wire staples,etc complete all as specified and as directed. |
| 17 | M&L for Aluminium Composite Panels (ACP) colour as approved for fixing in shutter/partition with all other necessary accessories for fixing complete all as specified and directed. |
| 18 | M&L for burnt clay, brick work with sub class 'B' bricks , using old size bricks, straight or curved on plan exc 6 m mean radius built in cement mortar 1:6 including demolition of brickwork built in mud mortar complete all as specified and directed. |
| 19 | M & L for walling of random rubble stone masonry, un-coursed, well bonded, bedded, solidly hearted and built in cement mortar 1:6 including demolition of stone boulder masonry built in mud mortar complete all as specified and directed. |
| 20 | M&L for chequered cement concrete tiles with grey cement and pigment of size 30cmX30cmX25mm thick ,set and jointed and pointed in neat cement slurry in floor etc over and including 15mm thick screed bed in CM 1:6 including demolition of Stone slabs and tiles of any description or thickness in floors complete all as specified and as directed |
| 21 | Demolition of cement concrete in ground floor and paving not exceeding 15cm thick ( below or above ground level ) complete including removal of debries out side MoD land complete all as specified and directed. |
| 22 | M&L for 75 mm thick PCC PCC1:4:8 type D-2 using 40mm graded stone aggregate as in sub base of floor etc complete all as specified and directed |
| 23 | Material & labour for Rendering 10 mm thick CM 1:6 on brick or concrete surfaces finished even & smooth without using extra cement including taking down cement plaster of any description including raking out joints, hacking for key, scrubbing down with water etc and removing unserviceable material,outside cantt area distance not exceeding 1.5 KM complete all as specified and directed. |
| 24 | M & L for Rendering 15 mm thick in two coats i.e. 10mm thick in CM 1:6 and 5mm thick in CM 1:4 using water proofing liquid compound as per manufacturer's instructions on other than fair faces brick or concrete surfaces and finishing surfaces even & smooth without using extra cement including taking down cement plaster of any description including raking out joints, hacking for key, scrubbing down with water etc and removing unserviceable material,outside cantt area distance not exceeding 1.5 KM complete all as specified and directed.Note :- Water proofing liquid compound shall be measured and paid separately. |
| 25 | Supply only liquid water proofing compound.ISI marked complete all as specified and directed. |
| 26 | M&L preparation of newly plastered surface of External wall by application of 1mm thick wall care putty to remove the dent and to make the surface even and smooth by grinding or rubbing with sand paper and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm complete all as specified and directed. |
| 27 | M&L for preparation of newly plastered surface of internal wall by application of 1mm thick wall care putty to remove the dent and to make the surface even and smooth by grinding or rubbing with sand paper and applying two coats of acrylic distemper over a coat of primer using roller all as specified and prescribed by manufacture of paint complete all as specified and directed. |
| 28 | Material & Labour for preparation of old surface of internal wall and applying two coats of oil emulsion distemper over putty (if required) make the surface even and smooth of all as specified and prescribed by manufacturer of paint and all as directed. Note- Putty shall be measured and paid seperately. |
| 29 | Material & Labour for preparation of old surface of external wall and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over one coat of putty (if required) complete all as specified and directed. Note- Putty shall be measured and paid seperately. |
| 30 | M&L for 2mm thick Acrylic/WaterProofing Wall Putty in two coats (each coat not less than 1mm) and surface finished even and smooth with sand paper complete all as specified and directed |
| 31 | Dismantling of timber scantlings 40 sqcm and over in section in un-framed work complete all as specified and directed. |
| 32 | S&F for 20 mm thick 2nd class hard wood boarding planed one side with butt joints and fixed with nails as in roofs, ceiling partition fascia, barge soffit etc (except flooring and skirting) including dismantling boarding, any description, fixed in any position with nails complete all as specified and directed |
| 33 | Preparation of new wood and wood based surfaces of any description not other wise described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed. |
| 34 | Dismantling of Asbestos cement (corruga ted, semicorrugated, etc.) sheets in roof coverings etc complete all as specified and as directed. |
| 35 | S&F 0.50mm thick (including coated thickness) pre-colour pre- profiled (Galvalume) corrugated sheets of required colour and design having tensile strength of 550 Mpa as in roof sheeting/sunshade/ wall cladding, north light curves, fixed with zinc coated self drilling fastener including EPDM washer complete laid with one corrugation side laps and min 150mm end lap laid to slope all as per manufacturer / profile maker instruction complete all as specified and as directed. |
| 36 | S & F Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick (ISI Marked) of any colour having tensile strength of 550 Mpa as in roof covering/ ridge, valey gutter fixed with self tapping screws complete all as specified and directed. |
| 37 | M&L in for MS steel Hollow ,Joist, channel, angle, tee or tubular Section work in tubular trusses, purlins, rafter, tubuler column, where connected common rafter and running rails fixed with angle cleat or other connection plates including special shaped washer etc, complete using ERW or induction butt welded tubes conforming IS-1161-1979 grade ST-240 complete all as specified and as directed. |
| 38 | M&L Preparation of newly steel surfaces, of any description, over 10 cm width or girth, and applying Two coats of synthetic enamel paint over a coat of red oxide primer complete complete all as specified and as directed |
| 39 | S&F 18 mm thick with min density 600 Kg/cu.m LEAD FREE PVC Celuka ply of single side rigid laminate of approved color and other side plain white colour fixed with ss screws and solvent cement/ adhesive to make kitchen cabinet shutters complete as per manufacturer’s instructions including taking down existing boarding complete all as specified and directed. |
| 40 | S&F Piano closing hinges openable at 110 degree for kitchen cabinet shutters complete in all respect and fixed in position all complete all as specified and directed. |
| 41 | S&F D-type cabinet handles premium quality, stainless steel 304/gloss chrome/SN finished 150mm long matt finished complete fixed in position complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 14, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedDec 07, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 22 daysDec 15, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 30 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender