Tender For Provn Of Vehicle Parking Shed For Mt Vehs Against Job No 23/Rev/Vf/2026-27 At Vf Awantipur Under Ge 861 Ews.
Tender Value
9.25 Lakhs
Estimated cost
Bid Submission
07 Dec 2026
22 days left
EMD
18600
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Anantnag → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Provn Of Vehicle Parking Shed For Mt Vehs Against Job No 23/Rev/Vf/2026-27 At Vf Awantipur Under Ge 861 Ews.
BOQ
| Sl. No. | Item Description |
| 1 | Material and Labour for Excavating in post holes (or similar holes)each not exceeding 0.5 cum.getting out , returning, filling in and ramming earth or broken rubble mixed with earth around,in layers not exceeding 25 cm in any type of soil complete all as specified and as directed by Engineer-in-Charge. |
| 2 | Surface excavation not exceeding 30 cm deep and averaging 15cm deep and getting out in any type of soil complete all as specified and as directed by Engineer-in-Charge. |
| 3 | Material & Labour for cement concrete 1:4:8, Type D2 (using 40mm graded stone aggregates) as in foundation, filling and mass concrete complete all as specified and as directed by Engineer-in-Charge. |
| 4 | Material & Labour for cement concrete 1:3:6, Type C2 (using 40mm graded stone aggregates) as in foundation, filling and mass concrete complete all as specified and as directed by Engineer-in-Charge. |
| 5 | Material & Labour for Hardcore of broken stone or boulders , gauge not exceeding 63mm, deposited, spread and levelled in layers not exceeding 15 cm thick, watered and rammed to a true surface complete all as specified and as directed by Engineer-in-Charge. |
| 6 | Material & Labour for 100mm thick plain cement concrete 1:3:6, Type C2 (using 40mm graded stone aggregates as in sub base of floor complete all as specified and as directed by Engineer-in-Charge. |
| 7 | Material & Labour for Providing and laying 80mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour,design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over with and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand;complete all as specified and as directed by Engineer-in-charge. |
| 8 | Supply & Fixing Mild steel work as in tubular trusses and tubular post including special shaped washer etc.complete using ERW or induction butt welded tubes conforming IS:1161-1979 Grade St-240 complete all as specified and as directed by Engineer-in-Charge. |
| 9 | Supply & Fixing Mild steel work as in Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) Fe 410 -W (Gde- E- 250) quality-B including distance pieces, cleats etc. complete all as speicied and as directed by Engineer in charge. |
| 10 | Supply & Fixing Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed by Engineer-in-Charge. |
| 11 | Material & Labour for preparation of newely steel surfaces of any description, over 10 cm in width or girth or otherwise described , with and including applying two coat of syntheic enamal paint over with and including one coat of red oxide zinc chrome primer complete all as spefied and as directed by Engineer-in-Charge. |
| 12 | Removing excavated material of any type of soil not exceeding 50m and depositing where directedc at a level n exc 1.5 mtr above the starting point . complete all as specified and directed by Engr- in- charge. |
| 13 | Supply & Fixing Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed by Engineer-in-Charge. |
| 14 | Material & Labour for PCC 1:2:4 , Type - B1, using 20mm graded stone aggregates as in coping, pedestal complete all as specified and directed by Engineer-in-Charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 14, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedDec 07, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 22 daysDec 10, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 25 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender