Tender For Repair/Maint To Flooring Plinth Protection Plastering And Other Connected B/R Work In Md Accn Of Jcos/Ors (Zone I) At Lansdowne
Tender Value
24 Lakhs
Estimated cost
Bid Submission
07 Dec 2026
22 days left
EMD
48000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Pauri Garhwal → Uttarakhand
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair/Maint To Flooring Plinth Protection Plastering And Other Connected B/R Work In Md Accn Of Jcos/Ors (Zone I) At Lansdowne
BOQ
| Sl. No. | Item Description |
| 1 | Demolition of brick work or stone/ boulder masonry, built in cement mortar or cement lime mortar including all quoins,arches, pillars,etc. but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed. |
| 2 | Demolition of cement concrete in ground floor and pavings not exc 15 cm thickness below or above ground level including removal of rubbish out side MOD land complete all as specified and directed. |
| 3 | M&L for 75 mm thick PCC (1:4:8) type D2, (using 40 mm graded stone agg) as in sub base complete all as specified and directed. |
| 4 | M&L for Chequered cement concrete tiles 30cm x 30cm x 25mm thick set, jointed and pointed in neat cement slurry in floors over and including 20 mm thick screed bed in cement mortar (1:6) complete all as specified and as directed. |
| 5 | M&L for sand filling under paver block including watering and consolidation complete all as specified and directed. |
| 6 | M&L rubber moulded coloured glossy finish machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade With Grey cement and no pigment complete all as specified and as directed. |
| 7 | M&L for brick work with old size full brick subclass ‘B’ burnt clay bricks, straight or curved on plan exc 6m mean radius, built in CM (1:4) complete all as specified and directed. |
| 8 | M&L for 75mm thick PCC (1:3:6), type C-2 using 40mm graded stone aggregate as in plinth protection, surface finished even & fair without using extra cement, complete all as specified and directed. |
| 9 | M&L rendering 15 mm thick in CM 1:6 on fair faces of brick work finished even and smooth without using extra cement complete all as specified and directed. |
| 10 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises from MoD land complete all as specified and as directed. |
| 11 | M&L for joint free Non- skid coloured ceramic tiles 7 to 8 mm thick area of each tile exe 0.18 sqm but not exe 0.36, as in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match including 10 mm thick rendering in CM 1:6 complete all as specified & directed. |
| 12 | M&L glazed ceramic tiles in vertical surface 450x350x7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over and including 15 mm thick rendering in CM (1:6) complete all as specified and as directed. |
| 13 | Dismantling of water tanks exc 500 ltr capacity but n exc 1000 ltr complete all as specified and as directed. |
| 14 | S&F 1000 ltr capacity rotational moulded polyethylene water storage tanks triple layered white (cylindrical vertical with closed top) hoisted and fixed in position and including 20 mm dia ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plasttic ball screwed for iron pipe and fixed (Minimum weight 20mm-455gms), complete all as specified and directed |
| 15 | S&F in repair Stop valve 20mm dia bore,cast copper alloy, screwed down, high pressure, with crutch or butterfly handle,screwed both ends for iron pipe or for unions and fixed complete all as specified and as directed. |
| 16 | S&F in repair vitreous china squatting pan of “Orissa” pattern of size 580 mmx 440mm white with integral foot rest (excluding flushing cistern and flush pipe) including connection to trap and to flushing pipe, anti syphonage pipe etc and making good to floor complete all as specified and as directed. |
| 17 | S&F in repair PVC valveless, syphonic action type low level flushing cistern white with inlet ball valve, float and handle, 10 ltr capacity complete with flush pipe(Long bend) 32mm dia complete all as specified & directed. |
| 18 | S&F in repair Vitreous china wash hand basin,white ,flat back of size 550x400mm with PVC connection (15x450)mm long with PTMT nuts and PVC washer and including cutting for pinning in ends,pair of cast iron brackets and provision of PVC waste pipe 32mm of adequate length , waste coupling of 32 mm dia of PTMT half or full threaded Min wt 45 gram,fixing of tap complete all as specified and directed. |
| 19 | S&F PVC pipe 32/40 mm dia as in waste pipe to sink complete all as specified & directed. |
| 20 | S&F in repair 600mm x 450 mm bevelled edge mirror of selected quality glass, mounted on 6 mm thick commercial quality plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed. |
| 21 | S&F CP Brass Tubular towel rail 20mm dia D-type 60 cm long between flanges, including brackets and fixed to walls, complete all as specified and directed. |
| 22 | S&F in repair PVC connection 15 mm size, of length 450 mm, with PTMT nuts complete all as specified and directed. |
| 23 | S&F in repair 15 mm bore steel water tubing medium grade galvanised with all fittings including short lengths, fixed to walls, concealed in wall and ceiling or laid in floor complete with all fittings(such as bends, elbows, Tee short pieces, connectors, back nuts, diminishing pieces, caps and plugs, unions etc.) complete all as specified and directed. |
| 24 | S&F in repair 20 mm bore steel water tubing medium grade galvanised with all fittings including short lengths, fixed to walls, concealed in wall and ceiling or laid in floor complete with all fittings(such as bends, elbows, Tee short pieces, connectors, back nuts, diminishing pieces, caps and plugs,unions etc.) complete all as specified and directed. |
| 25 | Supply only Pillar tap 15 mm dia fancy type, cast copper alloy, with capastan heads, chromium plated screwed down high pressure with or without lettered Hot or Cold with scrwed shanks and fly nuts, screwed for iron pipe and fixed complete all as specified and directed. |
| 26 | S&F 15 mm Bib tap fancy type cast copper alloy chromium plated with capstan handle screwed down screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed. |
| 27 | S&F in repair Stop Angle valve cast copper alloy chromium plated 15mm dia, screwed down, high pressure with capstan handle, screwed both ends for iron pipes or for unions and fixed ,complete all as specified and directed. |
| 28 | S & F in repair sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to waste pipe, overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and directed. |
| 29 | Dismantaling of Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets complete all as specified and directed. |
| 30 | S&F False Ceiling at all heights with GRG (Glass Fiber Reinforced Gypsum) false ceiling tiles of size 595 x 595 mm of approved texture, design and patterns having moisture content less than 2%, humidity resistance of 99%, NRC 0.50 to 0.75 as per IS 8225 : 1987, Non Combustible as per BS 476 (part 4)-1970 and light reflectance of 85% (minimum) to be laid in true horizontal level suspended on inter locking metal T-grid of hot dipped galvanised iron section of 0.33 mm thick (galvanized @ 120 grams per sqm including both sides) comprising of main T-runners of size 15 x 32 mm of length 3000 mm, cross -T size 15 x 32 mm of length 1200 mm, and secondary intermediate cross-T of size 15 x 32 mm of length, 600 mm to form grid module of size 600 x 600 mm, suspended from ceiling using galvanised mild steel items (galvanising @ 80 grams per sqm) i.e, 50mm long, 8mm outer diameter M-6 dash fasteners, 6mm dia fully threaded hangar rod up to 1000 mm length and L-shape level adjuster of size 85 x 25 x 2 mm, Galvanised iron perimeter wall angle of size 24 x 24 x 0.40 mm of length 3000 mm to be fixed on periphery wall / partition with the help of plastic rawl plug at 450 mm center to center and 40mm long dry wall wood screws. The work shall be carried out as per specifications, drawing, and as per directions of engineer-in-charge with semi perforated 12mm thick micro tabular edged GRG false ceiling tiles complete all as specified and directed. |
| 31 | Demolition and breaking up drain pipe (SGSW /reinforced/CI /PVC etc)) of 150 mm nominal bore laid in trenches, set & jointed in cement morter, incl necessary earth work, all as specified and directed. |
| 32 | M&L for PCC 1:3:6 type C-2 using 40 mm graded crushed stone aggrs as in packing under and haunching against the sides of pipe or as required at site after the pipes are laid over the existing bed and tested for 150 mm bore of pipe all as specified and as directed. |
| 33 | M&L for salt glazed stone ware (SGSW) pipe, 150 mm bore grade A, ISI marked, laid in trenches and jointed in CM (1:1) complete all as specified and directed Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 14, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedDec 07, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 22 daysDec 15, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 30 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender