Agriculture Government Departments Closing in 14 days TDR #58534221

Tender For Development Of External Bio-Security System In The Bull Mother Farm And Frozen Semen Bull Station ( Fsbs) Inside Salboni Farm Complex, Salboni, Paschim Medinipur Under Paschim Banga Go Sampad Bikash Sanstha , Kolkata-700106

Issued by Government Departments · 24 Paraganas North, West Bengal
Tender Value
72.56 Lakhs
Estimated cost
Bid Submission
05 Dec 2026
14 days left
EMD
1.45 Lakhs
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
24 Paraganas North → West Bengal
EMD Exemption
Available
Quantity
Not Available

Project Description

Tender for Development Of External Bio-Security System In The Bull Mother Farm And Frozen Semen Bull Station ( Fsbs) Inside Salboni Farm Complex, Salboni, Paschim Medinipur Under Paschim Banga Go Sampad Bikash Sanstha , Kolkata-700106

Corrigendum

Sr No Corrigendum Date Corrigendum Type New Submission Date
1 18-Nov-2026 Prebid Meeting Date alteration Date 05-Dec-2026

BOQ

Name of Work:- Development of external Bio-security system in the Bull Mother Farm and Frozen Semen Bull Station ( FSBS) inside Salboni Farm Complex, Salboni, Paschim Medinipur under Paschim Banga Go Sampad Bikash Sanstha , Kolkata-700106
Sl. No. Item Description
1CIVIL WORK
2Clearing compound premises of shurbs, plants, jungles etc. by cutting and removing as directed (Specific permission of Engineer-in-Charge prior to execution will be necessary). (Payment to be made on area cleared)
3Earth work in excavation of foundation trenches or drains, in all sorts of soil (including mixed soil but excluding laterite or sandstone) including removing, spreading or stacking the spoils within a lead of 75 m. as directed. The item includes necessary trimming the sides of trenches, levelling, dressing and ramming the bottom, bailing out water as required complete. (a) Depth of excavation not exceeding 1,500 mm
4Earth work in filling in foundation trenches or plinth with good earth, in layers not exceeding 150 mm. including watering and ramming etc. layer by layer complete. (Payment to be made on the basis of measurement of finished quantity of work)(a) With earth obtained from excavation of foundation. 1/3 of Excavated volumn
5A) Filling in foundation or plinth by silver sand in layers not exceeding 150 mm as directed and consolidating the same by thorough saturation with water, ramming complete including the cost of supply of sand. (payment to be made on measurement of finished quantity)
6Single Brick Flat Soling of picked jhama bricks including ramming and dressing bed to proper level and filling joints with local sand.
7Brick work with 1st class bricks in cement mortar (1:6)(a) In foundation and plinth
8Supplying, fitting & fixing 1.5mm thick Trapezoidal profilecorrugation Polycarbonate clear sheet made of nationalbrand, excluding the supporting frame work, fitted and fixedwith 10mm dia x 55mm Self-driving screws, EPDM washersand putty complete with 150mm end lap and one corrugation minimum side lap complete as per specification & direction of Engineer-in-charge including materials,labour, taxes and all other incidental charges (Payment to be made on area of finished work). In Roof
9Supplying, fitting & fixing Zn-Al alloy (55% Al & 45% Zn)coating of 150 grams per sq. metre (followed by colourcoated on both side) steel sheet work having minimum yieldstrength of 550 Mpa of trapizoidal profile of approved make(excluding the supporting frame work) fitted and fixed with55 mm & 25 mm self tapping screw, EPDM Washer 16 mmdia & 3 mm th. washer etc. complete with 150 mm end lapand one corrugation minimum side lap. (Payment to be madeon area of finished work).(i) In Roof:- a) With 0.5 mm thick sheet
10M.S. structural works in columns, beams etc. with simple rolled structural members (e.g. joists, angle, channel sections conforming to IS: 226, IS: 808 & SP (6)- 1964 connected to one another with bracket, gussets, cleats as per design, direction of Engineer-incharge complete including cutting to requisite shape and length, fabrication with necessary bolting, metal arc welding conforming to IS: 816- 1969 & IS: 1995 using electrodes of approved make and brand conforming to IS:814- 2004, haulage, hoisting and erection all complete. The rate includes the cost of rolled steel section, consumables such as electrodes, gas and hire charge of all tools and plants and labour required for the work including all incidental chages such as electricity charges, labour insurance charges etc.I) For structural members of specified sections weighing less than 22.5 Kg./m
11M.S. gate of Jail type as per approved design made of strong M.S. frame work, intermediate stiffeners and round / square bars or angles. M.S. sheet (not less than 14 gauge) gussets, cleats etc. including necessary riveting, bolting, welding, locking and hanging arrangements, fitting and fixing complete as per direction of the Engineer-in -charge.In ground floor
12Locking arrangement for Jail type doors including supplying fitting and fixing in position complete as per approved design
13Supplying fitting and fixing I.R.C. fabric mesh with covering battens including cost of screws etc complete (excluding the cost of battens).In ground floor.(a) 50mm x 25mm x 2.7mm x 2.7mm
14Ordinary Cement concrete (mix 1:1.5:3) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement if any, in ground floor as per relevant IS codes.(i) Pakur Variety.
15(I) Cement concrete with graded stone ballast (40 mm size excluding shuttering) In ground floor(A) [Pakur Variety] (a) 1:3:6 proportion.
16Hire and labour charges for shuttering with centering and necessary staging upto 4 m using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams and columns, lintels curved or straight including fitting, fixing and striking out after completion of works (upto roof of ground floor) (f) 25 mm to 30 mm shuttering without staging in foundation (f) 25 mm to 30 mm shuttering without staging in foundation
17Reinforcement for reinforced concrete work in all sorts of structures including distribution bars, stirrups, binders etc initial straightening and removal of loose rust (if necessary), cutting to requisite length, hooking and bending to correct shape, placing in proper position and binding with 16 gauge black annealed wire at every intersection, complete as per drawing and direction. I. SAIL/TATA/RINL[For Contractor Supply](a) For works in foundation, basement and upto roof
18Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary. (Ground floor).[Excluding cost of chipping over concrete surface] (ii) With 1:4 cement mortar. (c) 10 mm thick plaster
19Neat cement punning about 1.5mm thick in wall,dado,windowsill,floor etc. NOTE:Cement 0.152 cu.m per100 sq.m.
20(a) Priming one coat on steel or other metal surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc
21(A) Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary :With other than hi-gloss of approved quality-(iv) Two coats (with any shade except white)
22Supplying & laying as per IRC-SP:063-2004 paver unit of anyshade of approved quality as per relevant IS code, laid inpattern as directed in pavement, footpath, driveway (paverblock only), etc including necessary underlay complete in allrespect with all labour and material. [Border concrete if necessary to be paid separately]. Note: Sub-grade CBR should not be less than 5. (c) 60 mm thick interlocking designer concrete paver block M35 grade for light-traffic zone,commercial & office complex,tourist resort as per IS: 15658-2006 (over 20-40 mm medium sand bed on 250mm thk WBM/ WMM base course & 250 mm thk bound gnaular /granular sub-base course including cost of sand for sand bed but excluding cost of base ,sub-base course & subgrade preparation.) (i) Grey
23Earth work in filling in compound, tank, low land, ditches etc. with good earth, in layers not exceeding 150 mm. including breaking clods and consolidating the same by ramming and dressing complete. (Payment will be made on profile measurement before and after the work)(b) (i) With carried earth arranged by the contractor within a radius of 3 km. including cost of carried earth
24Taxes & Duties
25Add: G.S.T. @ 18% of Rs. 60,88,854=27 i.e. Rs. 10,95,993=77
26Add: Labour Cess @ 1% of Rs.71,84,848=04 i.e. Rs. 71,848=48 Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58534221
AUTHORITY Government Departments
TENDER VALUE 72.56 Lakhs
LAST DATE 05-12-2026
Authority
Authority Name Animal Resources Development Department
Work Description Tender for Development Of External Bio-Security System In The Bull Mother Farm And Frozen Semen Bull Station ( Fsbs) Inside Salboni Farm Complex, Salboni, Paschim Medinipur Under Paschim Banga Go Sampad Bikash Sanstha , Kolkata-700106
Basic Detail
Tender No PBGSBS/ENGG-SLB/NIT-324/26-27
Bidding Type Tender
Location
City 24 Paraganas North
State West Bengal
Key Dates
Publish Date 18 Nov 2026
Submission Date 05 Dec 2026
Open Date 07 Dec 2026
Finance
Tender Value 72.56 Lakhs
Tender Fee Ref. Documents
EMD 1.45 Lakhs
Exemption Available
Document List
20196e01-5b69-4869-9650-3330412b5f15.html
BOQ_5211064.xls
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 18, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Dec 05, 2026
18:00 IST

Corrigendum-1 Issued

Clarifications on tender conditions and amendments issued.

Upcoming · 14 days
Dec 05, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 14 days
Dec 07, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 16 days

Tender Documents

Download All (ZIP) ↓
html

20196e01-5b69-4869-9650-3330412b5f15.html

xls

BOQ_5211064.xls

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender