Tender For Renovation Of Sukhnadiya M.I. Scheme, Vill- Sarma, Panchayat- Sildag, Block-Chhatarpur, Distt-Palamu.
Tender Value
4.76 Crore
Estimated cost
Bid Submission
30 Nov 2026
9 days left
EMD
4.77 Lakhs
Bank guarantee accepted
Document Fee
10000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Palamu → Jharkhand
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Renovation Of Sukhnadiya M.I. Scheme, Vill- Sarma, Panchayat- Sildag, Block-Chhatarpur, Distt-Palamu.
BOQ
| Sl. No. | Item Description |
| 1 | E/W in stripping by hydraulic M/C in grade A & B type of soil including morroum soil, soil mixed with kankar, pebbles, boulders upto 300 mm size and disposal of the same along with all organic materials in the country side beyond 150M. upto 500 M in all b |
| 2 | E/W in dam fill in semi previous or impervious zone excavation by Hydraulic Excavator and carriage by Tipper Truck making dam in proper design section including earth to be laid in layers of not more than 225 mm thick and breaking of clods to maximum 63 mm cube with all lifts including construction and maintenance of haul road etc. all complete as per specification and direction of E/I.Lead beyond 150 M but upto 500 M. (SR No. 5.1.22.1)(WRD PART B , Pg 122 |
| 3 | Watering and consolidation of earth laid in 150mm to 225mm layers by manual labour with C.I. hammer to achieve minimum 85% of maximum dry density including supply of water and necessary tools and plants with all lead and lift all complete as per specification and direction of E/I (S.R. No. 7.1.38 WRD Page -157) |
| 4 | Supplying and laying sand filter blanketing in slope of dam of the dam as per design and drawing with watering, compaction including cost of materials, royalty all taxes etc. but excluding the cost of carriage all complete as per specification and direction of E/I. (S.R. No.Part-A 5.6.5) P-258 |
| 5 | Supplying and laying stone metal (size 20mm to 63mm) on the slope of dam as per design, drawing including the cost of materials royalty and all taxes etc. but excluding the cost of carriage all as per specification and direction of E/I. (S.R. No.Part-A 5.6.7. pg 258) |
| 6 | Supplying and laying (properly as per design and drawing) rip-rap with good quality of boulders duly packed including the cost of materials royalty all taxes etc. but excluding the cost of carriage all complete as per specification and direction of E/I.(SR Item No. 5.6.8 Part A Page -258) |
| 7 | Supplying and laying boulder in rock toe in trenches of the dam as per design, drawing including the cost of materials royalty and all taxes etc. but excluding the cost of carriage all complete as per specification and direction of E/l.( COMMON PART A SL NO 5.6.4 , Pg-258) |
| 8 | Dismantling of existing structures like culverts, bridges,retaining walls and other structure coprising of masonary,cement concrete,wood work,steel work,including T$P and scaffolding wherever necessary sorting the dismantled material, disposal of unserviceable material and stacking the servicable material with all lifts and lead of 1000m. (S.R NO. 2.04(iii) B ,Common pg -245) |
| 9 | Scrapping of Plaster in lime or cement mortar from brick / stone masonry ( common SOR part A , pg- 246, item No 2.04(viii) |
| 10 | Earthwork in excavation of foundation trenches in ordinary soil (vide classification of soil item-A) and disposal of excavated earth so obtained to a distace up to 50m and average lift of 1.5 m including levelling ramming the foundation trenches removing roots or shrubs. all complete as per specification and direction of E/I (S.R NO. 7.1.27 WRD, pg-155) |
| 11 | Earth work in excavation of foundation trenches of toe wall,spillway,head regulator, outlet, intake well etc. as per designed section in all kinds of soil including moorum soil, soil mixed with kankar, pebbles and boulders upto 300mm size and disposal of the same (beyond 50 m away from the edge of the trenches) with initial lead of 150m and initial lift of 1.5 m as per specification and direction of E/l.(Vide Item No. - 5.1.14.1 of WRD Part -B ,Pg No.-119) |
| 12 | E/W in bed clearance or desilting of canals carrying F.S. Discharge between 8.5 cumec (300 cusecs ) and 0.14 cumecs (5 cusecs) and renovation of pynes etc disposal of excavated earth etc in ordinary soil including rough dressing with initial lead of 10 m and lift of 1.5 m as per specification and direction of E/I. Specification revised vide TEC Letter No. 63 and Dated 07/10/94(7.1.20 wrd) p-155 |
| 13 | Earth work in excavation in ordinary rock or soft rock (where blasting is not needed ) (vide classification of soil item C ) with initial lead of 10m and lift of 1.5m , including dressing making the sides in proper profile and dressing the bed in proper grade etc.all complete as per specification and direction of E/I.(7.1.12.2 WRD pg-153) |
| 14 | E/w in excavation and filling in canal by the hydraulic excavator as per designed section in ordinary soil(vide classification of soil item-A) and making the banks with excavated earth in proper profile and clod breaking and laying earth in 225 mm layers with initial lead of 10m and all lifts. all complete as per specification and direction of E/I.(7.1.43.3wrd)pg--158 |
| 15 | Proving coarse clean local sand in filling in foundation trenches includding ramming , watering, royalty and all other taxes .complete job as per specification and direction of E/I (S.R NO. 7.1.37 WRD, pg -157) |
| 16 | Providing and laying in position cement concrete of specified grade , excluding the cost of centering and shuttering - all work upto plinth level . 1:2:4 (1 cement : 2 coarse sand(zone-III) : 4 graded stone aggregate 20 mm nominal size). (SR.Item No. 5.3.1.2)BCD pg-127 |
| 17 | Providing and laying in position specified grade of R.C.C, excluding the cost of centering, shuttering, finishing and reinforcement- all work upto plinth level . 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size). (SR.Item No. 5.3.9.1)BCD pg-128 |
| 18 | Reinforced cement concrete work in walls (any thickness) including attached pilasters , buttress, plinth,and string coarses , fillets , columns, pillars,piers, abutments , posts and struts etc above plinth level upto five floor level , excluding the cost of centering, shuttering, finishing and reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size). ( BCD 5.3.10 Pg- 128) |
| 19 | Providing rough dressed random rubble stone masonary in CM (1:4) in foudation with approved quality of coarse sand of requisite F.M. (2.5 to 3.0) washed and screened with raking out joints,curing, scaffolding and its removal wherever required including royalty and all taxes etc. complete job as per specificition and direction of E/l.(Vide Item No.-5.4.8 of WRD Part- B, Pg No.- 131) /Vide Item No.- 5.2.28 of Common Part-A , Pg.No.-253 |
| 20 | Providing rough dressed random rubble stone masosry in cm. (1:4) in superstructure with approved quality of coarse sand of requisite F.M. (2.5 to 3.0) washed and screened with raking out joints,curing scaffolding and its removal wherever required including royalty and all taxes etc. complete Job as per specificition and direction of E/l.(Vide Item No.- 5.4.11 of WRD Part- B, Pg No.- 131) / Vide Item No.- 5.2.31 of Common Part-A , Pg.No.-253 |
| 21 | Providing 25 mm thick cement plaster (1:4) with approved quality of sand of requisite F.M. (2.5 to 3.0) washed and screened including curing, scaffolding wherever required and its removal royalty and all taxes etc. complete job as per specification and direcition of E/l.(Vide Item No. 5.5.5 of WRD Part -B, Pg No.- 133) / V ide Item No.- 5.7.12 of Common Part-A,Pg No.-249 |
| 22 | Providing 1.5 mm cement punning including curing carriage of water with all leads and lifts as per building specification and direction of E/I.( 5.7.11 part -A , pg 249 |
| 23 | Providing Tor steel reinforcement of 8 mm dia rods as per approved design and drawing with cutting , bending and binding with annealed wire with cost of wire , removal of rust , placing the rods in position( including carriage of bars to work site) all complete as per building specification and direction of E/I. (5.5.4 BCD part B) Pg-140) |
| 24 | Providing Tor steel reinforcement of 10 mm dia rods as per approved design and drawing with cutting , bending and binding with annealed wire with cost of wire , removal of rust , placing the rods in position( including carriage of bars to work site) all complete as per building specification and direction of E/I. (5.5.5.(a). BCD part B) Pg-140) |
| 25 | Providing Tor steel reinforcement of 12mm dia rods as per approved design and drawing with cutting , bending and binding with annealed wire with cost of wire , removal of rust , placing the rods in position( including carriage of bars to work site) all complete as per building specification and direction of E/I. (5.5.5.(b). BCD part B) Pg-140) |
| 26 | Providing Tor steel reinforcement of 16 mm dia rods as per approved design and drawing with cutting , bending and binding with annealed wire with cost of wire , removal of rust , placing the rods in position( including carriage of bars to work site) all complete as per building specification and direction of E/I. (5.5.5.c. BCD part B) Pg-140) |
| 27 | Providing shuttering including strutting proping etc. and its removal after use in foundation as per Specification and direction of E/I .(SR.Item No. 6.3.20 WRD pg-145) |
| 28 | Providing centering including strutting and proping and removal after use in deck slab as per specification and direction of E/I. (WRD 7.3.20, pg-146) |
| 29 | Earth work in filling foundation trenches or back filling of masonry structures with suitable earth in layers not exceeding 150mm thick well watered, rammed and fully compacted and finaly dressed with earth obtained from excavation of foundation trenches and kept at a lead of 30m and initial lift of 1.5m complete as per Specification and direction of E/I(SR.Item No. 6.1.16) pg-140 |
| 30 | Providing weep hole with dry graded stone filter of 20 mm to 40 mm size in abutment and wing wall as per specification and direction of E/l.(Vide Item No. 6.7.6 of WRD Part -B, Pg No.- 151 ) / Vide Item No.- 6.7.6 of Common Part-A,Sl No.- 6.9, Pg No.-258. |
| 31 | Supplying 150 mm dia NP2 RCC Hume pipe with collar as per IS 458- 1971 ( Sl No 10 M300 (ii), Pg No 96 wrd) |
| 32 | Labour for laying fitting and fixing 150 mm NP2 Hume pipe with collar in line , level and grade , as well as providing approved jointing material and joints properly filled to make them water proof , all complete as per specification and direction of E/I( s.R No 7.6.1.1 WRD , Pg No 169) |
| 33 | Supplying 450 mm dia NP2 RCC Hume pipe with collar as per IS 458- 1971 ( Sl No 10 M300 (vi), Pg No 96 wrd) |
| 34 | Labour for laying fitting and fixing 450 mm NP2 Hume pipe with collar in line , level and grade , as well as providing approved jointing material and joints properly filled to make them water proof , all complete as per specification and direction of E/I( s.R No 7.6.1.4 WRD , Pg No 169) |
| 35 | Supplying 800 mm dia NP2 RCC Hume pipe with collar as per IS 458- 1971 ( Sl No 10 M300 (ix), Pg No 96 wrd) |
| 36 | Labour for laying fitting and fixing 800 mm NP2 Hume pipe with collar in line , level and grade , as well as providing approved jointing material and joints properly filled to make them water proof , all complete as per specification and direction of E/I( s.R No 7.6.1.6 WRD , Pg No 169) |
| 37 | Supplying 900 mm dia NP2 RCC Hume pipe with collar as per IS 458- 1971 ( Sl No 10 M300 (x), Pg No 96 wrd) |
| 38 | Labour for laying fitting and fixing 900 mm NP2 Hume pipe with collar in line , level and grade , as well as providing approved jointing material and joints properly filled to make them water proof , all complete as per specification and direction of E/I( s.R No 7.6.1.7 WRD , Pg No 169) |
| 39 | Iron and steel plate (8 & 10 x1500) SOR PART A Pg 45, M-195(a)(iii) |
| 40 | Iron and steel plate (over 12 upto 20 mm) SOR PART A Pg 45, M-195(a)(v) |
| 41 | Iron and steel channel (100 x 50 Gr. A) SOR PART A Pg 46, M-195(d)(ii) |
| 42 | Iron and steel joist (250 x 125 Gr. A) SOR PART A Pg 45, M-195(c)(i) |
| 43 | Iron and steel chequired plate (5 to 10 ) SOR PART A Pg 45, M-195(a)(ix) |
| 44 | Iron and steel angle (50 x50 x6 /8/10 Gr. A) SOR PART A Pg 45, M-195(b)(i) |
| 45 | Mild steel bars(Part A, pg-42, M-062) |
| 46 | Iron and steel angle (100 x110 x8/10/12 Gr. A) SOR PART A Pg 45, M-195(b)(v) |
| 47 | Mild steel bars (Av M6)(Part A, pg-47, M-1673) |
| 48 | Structurul Steel(Part A, pg-45, M-178) |
| 49 | Crane 10 tonne capacity ( SOR Part A Pg-57, P&M 86 |
| 50 | Carriage of materials : - (a) Cement :-Lead - 8 km (s) + 3 km (k) |
| 51 | (B) Sand: - Lead -10 km (s) + 3 km (k) |
| 52 | ( c ) Stone chips :- Lead-10 km (s) + 3 km (k) |
| 53 | (d) Metal :- Lead -10 km (s) + 3 km (k) |
| 54 | (e) Boulder :- Lead -10 km (s) + 3 km (k) |
| 55 | (f) Hume Pipe :- (i) 150 mm Dia:-Lead - 8 km (s) + 3 km (k) |
| 56 | (ii) 450 mm Dia:-Lead - 8 km (s) + 3 km (k) |
| 57 | (iii) 800 mm Dia:-Lead - 8 km (s) + 3 km (k) |
| 58 | (iv) 900 mm Dia:-Lead - 8 km (s) + 3 km (k) |
| 59 | G.S.T. @18% |
| 60 | Labour cess@1% Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 14, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 30, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 9 daysDec 01, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 10 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender