Housing Urban and Rular Development Boards / Undertakings / PSU Closing in 22 days TDR #58534067

Tender For Strengthening Of Road, Sewer, Drain In Sector-12 And Repair Of Parks In Sector 12 And 13 Scheme No. 7 Shastri Nagar Meerut.

Issued by Boards / Undertakings / PSU · Meerut, Uttar Pradesh
Tender Value
Ref. Documents
Estimated cost
Bid Submission
08 Dec 2026
22 days left
EMD
8.14 Lakhs
Bank guarantee accepted
Document Fee
7080
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Meerut → Uttar Pradesh
EMD Exemption
Not Available
Quantity
Not Available

Project Description

Tender for Strengthening Of Road, Sewer, Drain In Sector-12 And Repair Of Parks In Sector 12 And 13 Scheme No. 7 Shastri Nagar Meerut.

BOQ

Name of Work:- Strengthening of Road, Sewer, Drain in Sector-12 and Repair of Parks in Sector 12 and 13 Scheme no. 7 Shastri Nagar Meerut.
Sl. No. Item Description
1Earth workEarth work in surface excavation not exceeding 30 cm in depth but exceeding 1.5 m in width as well as 10 sqm on plan including disposal of excavated earth upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge: All kinds of Soil (DSR 2023 Item 2.1.1)
2Cartage of Earth by machenical transport. including loading and unloading and stackings on pucca road. Cartage upto 1 Km (DSR 2023 Item 1.1.2)
3WMMProviding, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers with paver in sub- base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density.
4Providing and laying dense graded bituminous macadam with higher capacity batch type HMP using crushed aggregates of specified grading, premixed with bituminous binder@ 4.5 percent by weight of total mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MORT&H specification clause No. 505 complete in all respects.
5Providing and laying bituminous concrete with higher capacity batch type hot mix plant using crushed aggregates of specified grading, premixed with bituminous binder @ 5.2 percent of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MORT&H specification clause No. 507 complete in all respects
6Providing and applying primer coat with SS1 grade bitumen emulsion on prepared surface of granular Base including clearing of road surface and spraying primer at the rate of 0.70 kg/sqm using mechanical means.
7Providing and applying tack coat with bitumen emulsion using emulsion pressure distributor at the rate of 0.20 kg per sqm on the prepared bituminous surface cleaned with mechanical broom.
8Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge.Nominal concrete 1:4:8 or leaner mix (i/c equivalent design mix)(As per DSR 15.2.2)
9Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved.(As per DSR 15.60)
10Providing and laying design mix cement concrete of M-30 grade, in roads/ taxi tracks/ runways, using cement content as per design mix, using coarse sand and graded stone aggregate of 40 mm nominal size in appropriate proportions as per approved & specified design criteria, providing dowel bars with sleeve/ tie bars wherever required, laying at site, spreading and compacting mechanically by using needle and surface vibrators, levelling to required slope/ camber, finishing with required texture, including steel form work with sturdy M.S. channel sections, curing, making provision for contraction/ expansion, construction & longitudinal joints (10 mm wide x 50 mm deep) by groove cutting machine, providing and filling joints with approved joint filler and sealants, complete all as per direction of Engineer-in-charge (Item of joint fillers, sealants, dowel bars with sleeve/ tie bars to be paid separately).Cement concrete prepared with batch mixing machine. As per DSR 2023 16.43.1
11Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources) (DSR 2023 Item 4.1.8)
12Brick work with common burnt clay F.P.S. (non modular) bricks of class 150 in superstructure above plinth level up to floor V level in all shapes and sizes in : Cement mortar 1:6 (1 cement : 6 coarse sand)AR
13Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class 150 in superstructure above plinth level up to floor V level. Cement mortar 1:4 (1 cement :4 coarse sand) AR
14Brick work with common burnt clay F.P.S. (non modular) bricks of class 150 designation 15 in foundation and plinth in: Cement mortar 1:6 (1 cement : 6 coarse sand) AR
15Wall painting with acrylic emulsion paint, having VOC (Volatile Organic Compound) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour: Two coats (DSR 2023 Item 13.82.2)
16Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : Two or more coats on new work(DSR 2023 - 13.61.1)
1712 mm cement plaster of mix : 1:6 (1 cement: 6 coarse sand) DSR 2023 13.4.2
18Provind and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the palstered wall surface to prepare the surface even and smooth complete. D.S.R No - 13.80
19Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete.Fixed to steel windows by welding(As per DSR 2023 - 9.48.1)
20Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) : 3 graded stone aggregate 20 mm nominal size). (DSR 2023 Item 5.3)
21Mild Steel or iron in plain work such as reinforced concrete or reinforced brick work (when not included in over all rates) wrought to required shape as necessary including bending for proper completion if the work and including supply of all steel and wastage & over lapping & hooks.
22Excavation of earth below ground level for laying of sewer, construction of manholes, shaft, gully pits etc. in ordinary soil (Loam clay or sand). Including dressing leveling refilling of trenches in 20cm. layer watering and ramming the same, including disposal of surplus excavated earth as directed by the Engineer - in - charge within a lead of 50 m. (S.I.No. 3001 U.P. Jal Nigam) (0-1.5m depth)
23(1.5-3m depth)
24(3-4.5m depth)
25(4.5-6m depth)
26Open timbering in trenches including strutting and shoring complete (measurements to be taken of the face area timbered):Depth not exceeding 1.5 m(As per DSR 2.20.1)
27Open timbering in trenches including strutting and shoring complete (measurements to be taken of the face area timbered):Depth exceeding 1.5 m but not exceeding 3 m(As per DSR 2.20.2)
28Open timbering in trenches including strutting and shoring complete (measurements to be taken of the face area timbered):Depth exceeding 3 m but not exceeding 4.5 m(As per DSR 2.20.3)
29Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 Ceent : 2 fine sand) including 250mm dia R.C.C. pipe.(DSR 2023 Item 19.6.3)
30Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 Ceent : 2 fine sand) including 450 mm dia. R.C.C. pipe(DSR 2023 Item 19.6.6)
31Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 coarse sand (zone-III) : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand (zone-III) : 8 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design : Inside size 120x90 cm and 90 cm deep including C.I. cover with frame (medium duty) 500m internal diameter, total weight of cover and frame to be not less than 116 kg (weight of cover 58 kg and weight of frame 58 kg) : With Sewer bricks conforming to IS : 4885 (DSR 2023 Item 19.7.2.2)
32Extra for depth for manholes : Size 120x90 cm With Sewer bricks conforming to IS : 4885 (DSR 2023 Item 19.8.2.2)
33J.C.B. Machine with driver with P.O.L. for site clearance (Front and loader 1cum bucket capacity including POL DSR No. 0052
34Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of sand, compacting and proper embedding/laying of interlocking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete all as per direction of Engineer-in- Charge 80 mm thick C.C. paver block of M-35 grade with approved colour design and pattern DSR No16.91.2. Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58534067
AUTHORITY Boards / Undertakings / PSU
TENDER VALUE Ref. Documents
LAST DATE 08-12-2026
Authority
Authority Name Uttar Pradesh Housing And Development Board
Work Description Tender for Strengthening Of Road, Sewer, Drain In Sector-12 And Repair Of Parks In Sector 12 And 13 Scheme No. 7 Shastri Nagar Meerut.
Basic Detail
Tender No 3266/G-12/92 Dated 06.11.2026
Bidding Type Tender
Location
City Meerut
State Uttar Pradesh
Key Dates
Publish Date 14 Nov 2026
Submission Date 08 Dec 2026
Open Date 09 Dec 2026
Finance
Tender Value Ref. Documents
Tender Fee 7080
EMD 8.14 Lakhs
Exemption Not Available
Document List
94f0a06d-240c-4203-913f-f76d1c234319.html
BOQ_2291813.xls
Ebid.pdf
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 14, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Dec 08, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 22 days
Dec 09, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 23 days

Tender Documents

Download All (ZIP) ↓
html

94f0a06d-240c-4203-913f-f76d1c234319.html

xls

BOQ_2291813.xls

pdf

Ebid.pdf

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender