Tender For Mtps Ii - Mi - O&Ahs - Bahs - Overhauling Of Drycon Conveyor, Its Hydraulic Operating System, Its Moving Parts And Connected Components During Capital Overhauling 2026-27.
Tender Value
Ref. Documents
Estimated cost
Bid Submission
20 Nov 2026
4 days left
EMD
37700
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Salem → Tamil Nadu
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Mtps Ii - Mi - O&Ahs - Bahs - Overhauling Of Drycon Conveyor, Its Hydraulic Operating System, Its Moving Parts And Connected Components During Capital Overhauling 2026-27.
BOQ
| Sl. No. | Item Description |
| 1 | Inspection, & Replacement of the worn out band elements (High profile & Low profile) by opening the manual doors and identifying the worn out band elements replacing the band elements by removing the chain links and chain attachments and reassembling the chain links and chain attachments and connected mechanical components and checking the operation of the Drycon conveyor including cost of hire charges for special tools and other T&P's required, all consumables and Safety appliances labour charges etc complete. |
| 2 | Inspection & Removing/ Replacing the worn out Supporting roller assemblies with spare such as oil seals, bearings, shaft sleeve, Circlip and Reassembling the supporting roller assemblies in to the Drycon conveyor and connected mechanical components including the cost of hire charges for special tools required and other T&P's required, all consumables such as oil seal, O-rings and other Safety appliances required etc., Labour charges etc complete (Spares will be supplied by TANGEDCO) |
| 3 | Inspection, Removing, Replacing the worn out Lateral correction guide plates of the Drycon conveyor, checking the Chain Pocket wheels in Drive end and Non drive end, Carrying out the alignment of the band elements with the guide plates, head and tail pulley of the Drycon conveyor including the cost of hire charges for special tools and other T&P's required, all consumables and other Safety appliances required, labour charges etc complete. (Spares will be supplied by TANGEDCO |
| 4 | Charges for Overhauling of all Bottom ash hopper Hydraulic systems, and its Pump, Cleaning the Filters and the hydraulic oil lines, Reconditioning /replacement of wornout internals, O-rings, Gaskets, Replacing the Oil, including cost of hire charges for T&P's required, all consumables such as ‘O’-rings, Oil Seals, Gaskets and other Safety appliances, labour charges etc complete and related works required at site, as per direction of the Engineer-in-charge. |
| 5 | Charges for Overhauling of Drycon Hydraulic tensioning unit and its lines, Hydraulic Cylinders, Pumps, Replacing the O-rings, Gaskets and replacing the oil, including the cost of hire charges for T&P's required, all consumables and Safety appliances, labour charges complete and related works required at site, as per direction of the Engineer-in-charge. |
| 6 | Inspection and attending the patch up welding of the DRYCON conveyor casing, bottom ash conveying chutes and its equipments. This work involves transporting the M.S plates from MTPS-II stores to Bottom ash area, cutting into required size, leading, lifting, positioning on the eroded portion of bottom ash conveying chutes elevation and welding eroded (or) punctured portion of Bottom Ash buffer hopper, Drycon & it’s internals, including the hire charges of scaffolding, Safety appliances and T&P’s and related works required at site, as per direction of the Engineer-in-charge . |
| 7 | Charges for inspection of entire liner plate, removing worn out liner plates and Renewal of DRYCON liner plates in Drycon conveyor casing and devoluting the scrap material at MTPS-II stores and hire charges for T&P required, consumables and Safety appliances and related works required at site, as per direction of the Engineer-in-charge. |
| 8 | Charges for Supply of Lateral Correction Guide Plate. |
| 9 | Charges for supply of 10 mm MS plate. |
| 10 | Supporting roller Bearing No: 32210 C (Taper roller bearing) |
| 11 | Charges for supply of 8 mm MS plate. |
| 12 | Charges for primary crusher rubber coupling |
| 13 | Charges inspection, of worn out guide I-beams (130 m), Renewal / Replacing of I-Beam in Drycon system, Correcting the alignment and devoluting the scrap material at MTPS-II stores including the cost of Materials required, T&P’s required, consumables and Safety appliances and related works required at site, as per direction of the Engineer-in-charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 14, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 20, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 4 daysNov 21, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 5 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender