Defence Statutory Bodies & Commissions/Committees Closing in 26 days TDR #58533148

Tender For Special Repair To Old/Rusted Pipeline Gi Tubing/Pp-R Pipe Line,Valave Pit And Control Valves In Certain Locations At Rayang Mil Stn.

Issued by Statutory Bodies & Commissions/Committees · East Siang, Arunachal Pradesh
Tender Value
82.90 Lakhs
Estimated cost
Bid Submission
12 Dec 2026
26 days left
EMD
1.49 Lakhs
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
East Siang → Arunachal Pradesh
EMD Exemption
Available
Quantity
Not Available

Project Description

Tender for Special Repair To Old/Rusted Pipeline Gi Tubing/Pp-R Pipe Line,Valave Pit And Control Valves In Certain Locations At Rayang Mil Stn.

BOQ

Name of Work:- SPECIAL REPAIR TO OLD/RUSTED PIPELINE GI TUBING/PP-R PIPE LINE,VALAVE PIT AND CONTROL VALVES IN CERTAIN LOCATIONS AT RAYANG MIL STN.
Sl. No. Item Description
1Excavation in trenches n. exc. 1.5 mtr wide and n. exc. 1.5 mtr in depth for foundation of pole and laying of CI/GI/DI/PPR pipe and getting out in Hard/dense of soil, complete all as specified and directed by Engr-in-charge.
2Removing surplus soil to a distance not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point, complete all as specified and directed by Engr-in-charge.
3Returning filling in and including spreading, levelling, watering and well ramming in layers not exceeding 25 cm, complete all as specified and directed by Engr-in-charge.
4Taking up down galvanised steel tubing and connection of size 20 mm dia and removal of unserviceable pipe from site of work complete all as specified and directed.
5Taking up down galvanised steel tubing and connection of size 25 mm dia and removal of unserviceable pipe from site of work complete all as specified and directed.
6Taking up down galvanised steel tubing and connection of size 40 mm dia and removal of unserviceable pipe from site of work complete all as specified and directed.
7Taking up down galvanised steel tubing and connection of size 50 mm dia and removal of unserviceable pipe from site of work complete all as specified and directed.
8Taking up down galvanised steel tubing and connection of size 80 mm dia and removal of unserviceable pipe from site of work complete all as specified and directed.
9Taking up down galvanised GI/CI and connection of size 100 mm dia and removal of U/S pipe from site of work complete all as specified and directed.
10Material and labour for 20 mm galvanised steel (Gl) tubing medium grade with screwed socket joints, together with all tube fittings (such as bends, elbows, tees, short pieces, connectors, back- nuts, diminishing pieces, caps, plugs and unions, etc.) and laying in trenches, etc., also for cutting, screwing and waste and for making forged bends on piping as required. Connectors shall be inserted, where required or directed. The rates also include cutting through walls, floors, etc. and their making good complete all as directed.
11Material and labour for 25 mm galvanised steel (Gl) tubing medium grade with screwed socket joints, together with all tube fittings (such as bends, elbows, tees, short pieces, connectors, back- nuts, diminishing pieces, caps, plugs and unions, etc.) and laying in trenches, etc., also for cutting, screwing and waste and for making forged bends on piping as required. Connectors shall be inserted, where required or directed. The rates also include cutting through walls, floors, etc. and their making good complete all as directed.
12Material and labour for 40 mm galvanised steel (Gl) tubing medium grade with screwed socket joints, together with all tube fittings (such as bends, elbows, tees, short pieces, connectors, back- nuts, diminishing pieces, caps, plugs and unions, etc.) and laying in trenches, etc., also for cutting, screwing and waste and for making forged bends on piping as required. Connectors shall be inserted, where required or directed. The rates also include cutting through walls, floors, etc. and their making good complete all as directed.
13Material and labour for 50 mm galvanised steel (Gl) tubing medium grade with screwed socket joints, together with all tube fittings (such as bends, elbows, tees, short pieces, connectors, back- nuts, diminishing pieces, caps, plugs and unions, etc.) and laying in trenches, etc., also for cutting, screwing and waste and for making forged bends on piping as required. Connectors shall be inserted, where required or directed. The rates also include cutting through walls, floors, etc. and their making good complete all as directed.
14Material and labour for 80 mm galvanised steel (Gl) tubing medium grade with screwed socket joints, together with all tube fittings (such as bends, elbows, tees, short pieces, connectors, back- nuts, diminishing pieces, caps, plugs and unions, etc.) and laying in trenches, etc., also for cutting, screwing and waste and for making forged bends on piping as required. Connectors shall be inserted, where required or directed. The rates also include cutting through walls, floors, etc. and their making good complete all as specified and directed
15Supply & replace in trenches Ductile Iron pipe centrifugally cast (Spun) with spid, class K-7 confirming to IS 8329/2000 suitable for (Push on) rubber gasket jointing with inside cement mortar lining duly ISI marked complete for 100mm mm dia.The rates also include taking down old unserviciable existing CI/GI/DI/MS pipe , cutting through walls, floors, etc. and their making good complete all as specified and directed.
16Supply & fixed Ductile iron fittings of Class K-12 special suitable for push on jointing as per IS 9523/2000 with inside cement mortar lining and out side zinc coating followed by bitumen coating including taking down complete for 80-100mm dia.complete all as specified and directed
17Supply and fixing of Gun-metal, globe or gate valves, with iron wheel head, screwed both ends of size 20 mm dia for iron pipe and fixed complete all as specified and directed
18Supply and fixing of Gun-metal, globe or gate valves, with iron wheel head, screwed both ends of size 25 mm dia for iron pipe and fixed complete all as specified and directed
19Supply and fixing of Gun-metal, globe or gate valves, with iron wheel head, screwed both ends of size 40 mm dia for iron pipe and fixed complete all as specified and directed
20Supply and fixing of Gun-metal, globe or gate valves, with iron wheel head, screwed both ends of size 50 mm dia for iron pipe and fixed complete all as specified and directed
21Supply and replace CI sluice valve size 100mm dia PN 1.6 conforming to IS-14846 flanged end complete with iron wheel head and stainless steel spindle complete all as specified and directed.
22Supply and replace CI sluice valve size 80mm dia PN 1.6 conforming to IS-14846 flanged end complete with iron wheel head and stainless steel spindle complete all as specified and directed.
23Dismantling old u/s valve pit and reconstruction of brick masonry valve pit of size 120cm x 120 cm x 120cm (internal dimension) with one brick thick P.C.C 1:4:8 type D-2 (using 20mm graded crashed stone aggregate) as in foundation concrete incl PCC (1:3:6) type C-1 (using 20mm graded crashed stone aggregate) as in bedding and coping 10mm thick cement plaster in Cement mortar (1:4) internally & externally upto 15 cm below ground level providing valve pit 50x50x6mm angle iron frame all round the fixed point by means of 4 Nos hold fast 150mm long made out of flat iron 40 x 6 mm embedded in PCC block (1:2:4) type B-1 (using 20mm graded crashed stone aggregate) of size 230 x200 x100mm. incl provn of hing welded with angle iron frame and Mild Steel cover 3 mm thick, Mild steel handle of suitable and size welded with MildSteel cover & suitable locking arrangement & applying two coats of synthetic enamel paint over a coat of red-oxide primer including necessary excavation work in soft/ loss soil complete all as specified & directed.
24Dismantling old u/s valve pit and reconstruction of brick masonry valve pit of size 90 cm x 90 cm x 90 cm (internal dimension) with one brick thick P.C.C 1:4:8 type D-2 (using 20mm graded crashed stone aggregate) as in foundation concrete incl PCC (1:3:6) type CI (using 20mm graded crashed stone aggregate) as in bedding and coping 10mm thick cement plaster in Cement mortar (1:4) internally & externally upto 15 cm below ground level providing valve pit 50x50x6mm angle iron frame all round the fixed point by means of 4 Nos hold fast 150mm long made out of flat iron 40 x 6 mm embedded in PCC block (1:2:4) type B-1(using 20mm graded crashed stone aggregate) of size 230 x200 x100mm. incl provn of hing welded with angle iron frame and Mild Steel cover 3 mm thick, Mild steel handle of suitable and size welded with MildSteel cover & suitable locking arrangement & applying two coats of synthetic enamel paint over a coat of red-oxide primer including necessary excavation work in soft/ loss soil complete all as specified & directed.
25M & L for cutting the road/hard standing and making good disturbed surfaces by using PCC type C-2 (1:3:6) by using 40 mm graded stone aggregate for the fixing the pipe complete all as specified and directed
26M&L for boring under bituminous/RCC Road / footpath / PCC Hard Standing / Drain for laying of GI/DI pipe size ranging from 25 mm to 100 mm dia without disturbing top surface complete all as specified and directed
27Supply and fix Pressure gauge 100 mm dia with ball valve of pressure 25 Kg/Sqcm complete all as specified and directed
28Supply & fix Cast Iron Air Valves with two air Outlets, 80 mm dia bore and fixing up in cast iron water supply mains complete all as specified and directed Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58533148
AUTHORITY Statutory Bodies & Commissions/Committees
TENDER VALUE 82.90 Lakhs
LAST DATE 12-12-2026
Authority
Authority Name Military Engineer Services
Work Description Tender for Special Repair To Old/Rusted Pipeline Gi Tubing/Pp-R Pipe Line,Valave Pit And Control Valves In Certain Locations At Rayang Mil Stn.
Basic Detail
Tender No 83119/E8
Bidding Type Tender
Location
City East Siang
State Arunachal Pradesh
Key Dates
Publish Date 14 Nov 2026
Submission Date 12 Dec 2026
Open Date 14 Dec 2026
Finance
Tender Value 82.90 Lakhs
Tender Fee 1000
EMD 1.49 Lakhs
Exemption Available
Document List
aed96f99-4a13-4b5a-b766-ab1407b2e8a6.html
BOQ_896011.xls
Tenderdocuments83119.pdf
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 14, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Dec 12, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 26 days
Dec 14, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 28 days

Tender Documents

Download All (ZIP) ↓
html

aed96f99-4a13-4b5a-b766-ab1407b2e8a6.html

xls

BOQ_896011.xls

pdf

Tenderdocuments83119.pdf

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender