Tender For special Repair Of Agniveer Accommodation For Otm Building Number P-237 In 39 Gtc At Varanasi Cantt, Under Ge (East) Prayagraj.
Tender Value
48.10 Lakhs
Estimated cost
Bid Submission
07 Dec 2026
15 days left
EMD
96200
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Varanasi → Uttar Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for special Repair Of Agniveer Accommodation For Otm Building Number P-237 In 39 Gtc At Varanasi Cantt, Under Ge (East) Prayagraj.
BOQ
| Sl. No. | Item Description |
| 1 | Demolition of cement concrete (unreinforced) in ground floors and paving not exceeding 15 cm thickness (below or above ground level) complete all as specified and directed. |
| 2 | M&L for 75mm thick Cement concrete 1:3:6 type C-2 using 40mm graded stone aggregate in levelling course,for floor benching etc., finished even & rough to receive cement mortar screed bed complete all as specified and directed. |
| 3 | M&L for supplying and fixing outdoor heavy-duty vitrified tiles of size 600×600 mm and 20 mm thick, anti-skid, UV-resistant, exterior grade, laid over and including 50 mm thick PCC M-10 (using 20 mm graded stone aggregate) as base layer, with 20 mm thick cement mortar screed bed in CM 1:4, tiles set in cement slurry/adhesive as per manufacturer’s specifications, joints filled with polymer-modified grout of matching shade, including surface preparation, cutting to size, curing and finishing complete all as specified and directed. Make: Johnson Endura Meteor Tiles or equivalent in Kajaria/Somany |
| 4 | M&L for 75 mm thick plain cement concrete 1:3:6, type C-2 (using 40 mm graded crushed stone aggregate) in plinth protection, finished even and smooth witht using extra cement, complete all as specified and directed. |
| 5 | Dismantling floor hearth or wall tiling including cement mortar bedding but not backing, removing serviceable tiles to store and rubbish off the premises, complete all as specified and directed. |
| 6 | M&L for machine-cut, pre-polished Kota stone slab flooring, 20–25 mm thick, with 300 mm wide white marble border of matching thickness along the entire perimeter of the flooring, laid over 20 mm thick cement-sand mortar bedding (1:6), including chipping of underside edges of stones, cutting, dressing, laying to proper lines and levels, jointing with grey cement slurry mixed with matching pigment, rubbing and polishing, including all materials and wastages, complete all as specified and directed. |
| 7 | M&L for machine cut pre-polished Kota stone slab 18-20mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing and rendering 10mm thick (1:4) on fair faces of brick work or concrete surfaces complete all as specified and as directed. |
| 8 | M&L for Mirror polishing on existing marble/ granite/ Kota stone/ stone work where ever required to give glossy finish complete including all necessory repair work and filling of joints with grey cement mixed with pigment to match the shad complete all as specified and directed. |
| 9 | Demolition of brick work built in cement or cement lime mortar complete all as specified and directed. |
| 10 | M&L Brick work with Fly ash old size subclass 'B' bricks, straight or curved on plan exceeding 6m mean radius, built in cement mortar 1:6 complete all as specified and directed. |
| 11 | M&L Brickwork with Fly ash old size subclass 'B' bricks, straight or curved on plan to any radius in half brick thick walls, built in built in CM 1:4 complete all as specified and directed. |
| 12 | Taking down cement or cement lime plaster, any description, on brick or stone walls, etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed. |
| 13 | M&L rendering 10 mm thick in cement mortar 1:6 on brick work or concrete surfaces, finished even and smooth complete all as specified and directed. |
| 14 | M&L rendering 15 mm thick in cement mortar 1:4 on brick work or concrete surfaces, finished even and smooth complete all as specfied and directed. |
| 15 | M&L rendering 5mm thick in cement mortar 1:3 on concrete surfaces in ceiling, finished even and smooth complete all as specified and directed. |
| 16 | M&L preparing new plastered or unplastered surfaces of walls and applying two coats of interior acrylic emulsion for smooth wall finish in approved colour/shade over a coat of primer over wall care putty after preparation of surfaces complete all as specified and directed. |
| 17 | M&L preparing new plastered or unplastered surfaces of ceiling after preparation of surfaces and applying three coats of white wash complete all as specified and directed. |
| 18 | M&L for complete removal of existing treatment from walls (any number of layers) by scrapping with steel scrappers or mechanical means, including filling depressions of scrapped surfaces and preparing old decorated plastered surfaces of wall including cornices, pilastered etc. and applying two coats of interior acrylic emulsion over one coat of primer over 1mm wall care putty on wall surface complete all as specified and directed. |
| 19 | Complete removal of existing treatment on wall/roof projections including facia, cornices etc by scrapping with mechanical sander (having mechanical vacuum mechanism) with sanding pad of appropriate grit to make surface clean, free from dust, loose paint etc. by skilled labour complete all as specified and directed. Please Enable Macros to View BoQ information |
| 20 | Complete removal of existing treatment on wall/roof projections including facia, cornices etc by scrapping with mechanical sander (having mechanical vacuum mechanism) with sanding pad of appropriate grit to make surface clean, free from dust, loose paint etc. by skilled labour complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 14, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedDec 07, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 15 daysDec 12, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 20 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender