Defence Statutory Bodies & Commissions/Committees Closing in 17 days TDR #58533140

Tender For Addition And Alteration To Certain Works At Vvip Guest Room At Rhq (East) Chennai Under Ge (I) (Cg) Chennai.

Issued by Statutory Bodies & Commissions/Committees · Chennai, Tamil Nadu
Tender Value
43.50 Lakhs
Estimated cost
Bid Submission
04 Dec 2026
17 days left
EMD
87000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Chennai → Tamil Nadu
EMD Exemption
Available
Quantity
Not Available

Project Description

Tender for Addition And Alteration To Certain Works At Vvip Guest Room At Rhq (East) Chennai Under Ge (I) (Cg) Chennai.

BOQ

Name of Work:- ADDITION AND ALTERATION TO CERTAIN WORKS AT VVIP GUEST ROOM AT RHQ (EAST) CHENNAI UNDER GE (I) (CG) CHENNAI.
Sl. No. Item Description
1B/R ITEMS
2Supply, Fixing and installing one complete outdoor decorative multi-tier cascading water fountain, fabricated from high-quality engineered cast stone with a uniform black polished or approved textured finish, complete with decorative top finial, central column, multiple cascading bowls/tiers, ornamental details, bottom collection arrangement, internal water-distribution passages and all necessary concealed supports, joints, compatible sealants and fixing accessories. The fountain shall have an overall height between 1.80 m and 2.40 m (6 ft to 8 ft) and an overall base diameter between 2.40 m and 3.60 m (8 ft to 12 ft). The assembly shall be suitable for permanent outdoor installation, resistant to weathering, UV exposure and normal wet-service conditions, and stable under its own weight and operating condition complete all as specified and as directed.Note: The bidders are requested to refer photograph of the fountain given under Particular specifications for guidance purpose only.
3Material & Labour for dismantling wrought iron or mild steel work of any description not otherwise provided for as specified and as directed.
4Material & Labour for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates of thickness not less than 1.6mm etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement all as specified and directed.
5Material & Labour for 12 mm thick Toughned glass as in hinged doors, partitions, railings, automatic doors and similar work including cutting to shape, drilling holes required all as specified and as directed.
6Material & Labour for Excavating trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out i soft/loose soil as specified and directed.
7Material & Labour for returning, filling in soft/ loose soil including spreading, levelling, watering and well ramming in layers not exc 25 cm as specified and as directed.
8Removing excavated soil to a distance not exceeding 50 Metre and depositing where directed at a level not exceeding 1.50 Metre above the starting point complete all as specified and as directed.
9Material & Labour for RCC nominal mix (1:1.5:3) (20mm graded stone aggregate) as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like cement concrete as specified and as directed.
10Material & Labour for RCC nominal mix (1:1.5:3) (20 mm graded aggregate) as in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete all as specified and as directed.
11Material & Labour for RCC nominal mix (1:1.5:3) (20 mm graded aggregate) as in Columns, pillars, piers, posts and struts all as specified and as directed.
12M & L for RCC nominal mix (1:1.5:3) (20 mm graded aggregate) as in Beams, cantilevers, bressummers, lintels over 1.5m span all as specified and as directed.
13M & L for RCC nominal mix (1:2:4) (12.5 mm graded aggregate) as in Beams, cantilevers, bressummers, lintels over 1.5m span all as specified and as directed.
14Material and labour for High Strength Deformed Steel Bars produced by Thermo Mechanical Treatment process [TMT] steel bars of grade Fe-500D in reinforcement, 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality complete all as specified and as directed.
15Material and labour for High strength Mild steel Deformed Steel Bars produced by Thermo Mechanical Treatment process [TMT] of grade Fe-500D in reinforcement, 5mm dia and over up to and including 10mm dia in stirrups, spacers and binders cut to length, bent to shape required and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality complete all as specified and as directed.
16Material and labour for rough finished surface Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter as specied and directed.
17Material and labour for Formwork to sides of pillars, posts, struts, piers, columns and stanchions all as specified and as directed.
18Material and labour forflat Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc all as specified and as directed.
19Material and labour for Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) rough finished surfaces of concrete as specified and as directed.
20M&L for demolition of concrete of any description and in any position not otherwise specifically provided for unreinforced cement concrete complete all as specified and as directed.
21Material and labour for Chequered cement concrete tiles, 25mm thick of size 200x200mm, set and jointed in neat cement slurry in floors and pointed with grey cement and pigments laid over screed bed complete all as specified and as directed. Note : Screed bed in cement mortar shall be measured and paid separately.
22M&L for screed bed or bedding layers of 20mm thick cement mortar (1:4) for laying floor finishes set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed.
23Supply and Fix, 1000 litres capacity Rotational Moulded Polyethylene (HDPE) FDA grade materials water storage tanks, three layered (Cylindrical vertical with closed top) screwed lid type conforming to IS 12701-1996 with manhole lid and suitable locking arrangement, making holes for inlet, outlet, washout and over flow pipes, hoisted and fixed in position as specified in SSR Part -I (2009) complete all as specified and as directed.
24Supply and Fix, 500 litres capacity Rotational Moulded Polyethylene (HDPE) FDA grade materials water storage tanks, three layered (Cylindrical vertical with closed top) screwed lid type conforming to IS 12701-1996 with manhole lid and suitable locking arrangement, making holes for inlet, outlet, washout and over flow pipes, hoisted and fixed in position as specified in SSR Part -I (2009) complete all as specified and as directed.
25Taking up or down 25mm dia GI steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and as directed.
26Taking up or down 20mm dia GI steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and as directed.
27Taking up or down 32mm dia GI steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and as directed.
28Supplying and laying of 25mm CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings in trenches complete all as specified
29Supplying and laying of 20mm CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings in trenches complete all as specified
30Supplying and laying of 32mm CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings in trenches complete all as specified
31Demolition and breaking up drain pipes (Salt glazed ware, asbestos cement Pipe /PVC pipe or reinforced concrete) set in cement mortar 100 mm dia including clamps complete all as specified.
32Supply and Fixing of 110mm dia PVC (SWR) pipes single socketed, in any length, laid in trenches or in floors / fixed to walls complete all as specified.
33Supply and Fixing of PVC (SWR) bends any radius, 110mm bore, fitted with oval access door complete all as specified.
34S&F 110mm bore PVC (SWR) junction, single (single T) equal or unequal with or without door access complete all as specified.
35S&F PPR ball valve 20mm dia high pressure of PTMT with aluminium rod & high density plastic ball screwed for iron pipe all as specified
36Supply and Fix Gun metal globe or gate valve of size 20mm bore confirming to IS 778-1984 with brass spindle and iron wheel head at the top screwed both ends for GI pipe including all fittings / fixtures like nipple, union etc., complete all as specified and as directed. Please Enable Macros to View BoQ information
37Supply and Fix Gun metal globe or gate valve of size 20mm bore confirming to IS 778-1984 with brass spindle and iron wheel head at the top screwed both ends for GI pipe including all fittings / fixtures like nipple, union etc., complete all as specified and as directed. Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58533140
AUTHORITY Statutory Bodies & Commissions/Committees
TENDER VALUE 43.50 Lakhs
LAST DATE 04-12-2026
Authority
Authority Name Military Engineer Services
Work Description Tender for Addition And Alteration To Certain Works At Vvip Guest Room At Rhq (East) Chennai Under Ge (I) (Cg) Chennai.
Basic Detail
Tender No 8381/E8
Bidding Type Tender
Location
City Chennai
State Tamil Nadu
Key Dates
Publish Date 14 Nov 2026
Submission Date 04 Dec 2026
Open Date 07 Dec 2026
Finance
Tender Value 43.50 Lakhs
Tender Fee 500
EMD 87000
Exemption Available
Document List
8381TENDER.pdf
b54887a8-695b-491f-a19e-916b6f69e5f5.html
BOQ_896021.xls
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 14, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Dec 04, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 17 days
Dec 07, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 20 days

Tender Documents

Download All (ZIP) ↓
pdf

8381TENDER.pdf

html

b54887a8-695b-491f-a19e-916b6f69e5f5.html

xls

BOQ_896021.xls

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender