Tender For Special Repair To Bldg No P-36 In Corps Camp Under Age B/R-Ii At Mil Stn Yol
Tender Value
48 Lakhs
Estimated cost
Bid Submission
09 Dec 2026
21 days left
EMD
96000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kangra → Himachal Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Special Repair To Bldg No P-36 In Corps Camp Under Age B/R-Ii At Mil Stn Yol
BOQ
| Sl. No. | Item Description |
| 1 | Providing and fixing in position false ceiling at all heights with GRG ( Glass Fibre Reinforced Gypsum ) having BIS 2095 Part 3 & moisture content less than 2%, humidity resistance of 99% , NRC 0.80 to 0.85 as per IS 8225:1987, Non Combustible as per BS 476 ( Part 4)-1970 and light Reflectance of 90% ( Minimum ), With 10 mm thick Fully perforated Square edge GRG panels/tiles of size 595 x 595 mm factory finished in white with square perforations arranged in a uniform grid pattern, having minimum Square perforation size varying from 5mm x 5mm to 12.2 x 12.2 mm with perforation layout designed to maintain uniform module continuity across panel joints and edge spacing coordinated to maintain uniform perforation module when adjacent panels are installed, backed with factory applied white acoustic fleece and having approximate perforation area of 10–11%, perforation layout and pattern shall be as per manufacturer’s standard design and approved sample. comprising of a frame made from especially fabricated galvanized mild steel sheet 0.50 mm thick pressed section(galvanizing @120 grams per sqm including both sides) i.e. vertical studs of size 48 x 34 x 36 mm are placed at 600mm center to center in a floor and ceiling channel section of size 50 x 32m fixed to the floor and soffit at 600mm centers using 12mm dia,50mm long wedge type expanded zinc alloy dash fastener with 10mm bolt. This same channel is then to be fixed in horizontal direction at 600mm center to center so as to form a grid of 600mm x 600mm. Glass wool of 50mm thickness is then to be inserted in the slots and finally GRG non-combustible panels/tiles are to be screw fixed with self Tapping pan head nickel coated mild steel screws of size 13 x 3.2mm on to this grid leaving an even groove of 1 mm between the panels. The joints between the panels are to be duly jointed and finished using recommended jointing compound and fiber joint tape roll 50mm wide (90 meter) roll and two coats of primer suitable for paneling as per manufacturer’s specification as Per direction of Engineer-in-Charge all complete. (Note: All the cuttings/making holes for electrical fittings/items are considered in the mentioned rate. Contractor shall quote his rate accordingly) including dismantling of existing false ceiling of any type or size with frame all as specified. Please Enable Macros to View BoQ information |
| 2 | Providing and fixing in position false ceiling at all heights with GRG ( Glass Fibre Reinforced Gypsum ) having BIS 2095 Part 3 & moisture content less than 2%, humidity resistance of 99% , NRC 0.80 to 0.85 as per IS 8225:1987, Non Combustible as per BS 476 ( Part 4)-1970 and light Reflectance of 90% ( Minimum ), With 10 mm thick Fully perforated Square edge GRG panels/tiles of size 595 x 595 mm factory finished in white with square perforations arranged in a uniform grid pattern, having minimum Square perforation size varying from 5mm x 5mm to 12.2 x 12.2 mm with perforation layout designed to maintain uniform module continuity across panel joints and edge spacing coordinated to maintain uniform perforation module when adjacent panels are installed, backed with factory applied white acoustic fleece and having approximate perforation area of 10–11%, perforation layout and pattern shall be as per manufacturer’s standard design and approved sample. comprising of a frame made from especially fabricated galvanized mild steel sheet 0.50 mm thick pressed section(galvanizing @120 grams per sqm including both sides) i.e. vertical studs of size 48 x 34 x 36 mm are placed at 600mm center to center in a floor and ceiling channel section of size 50 x 32m fixed to the floor and soffit at 600mm centers using 12mm dia,50mm long wedge type expanded zinc alloy dash fastener with 10mm bolt. This same channel is then to be fixed in horizontal direction at 600mm center to center so as to form a grid of 600mm x 600mm. Glass wool of 50mm thickness is then to be inserted in the slots and finally GRG non-combustible panels/tiles are to be screw fixed with self Tapping pan head nickel coated mild steel screws of size 13 x 3.2mm on to this grid leaving an even groove of 1 mm between the panels. The joints between the panels are to be duly jointed and finished using recommended jointing compound and fiber joint tape roll 50mm wide (90 meter) roll and two coats of primer suitable for paneling as per manufacturer’s specification as Per direction of Engineer-in-Charge all complete. (Note: All the cuttings/making holes for electrical fittings/items are considered in the mentioned rate. Contractor shall quote his rate accordingly) including dismantling of existing false ceiling of any type or size with frame all as specified. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 14, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedDec 09, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 21 daysDec 11, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 23 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender